[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210301161221.450623381@linuxfoundation.org>
Date: Mon, 1 Mar 2021 17:09:30 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Roja Rani Yarubandi <rojay@...eaurora.org>,
Akash Asthana <akashast@...eaurora.org>,
Wolfram Sang <wsa@...nel.org>, Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.11 402/775] i2c: i2c-qcom-geni: Add shutdown callback for i2c
From: Roja Rani Yarubandi <rojay@...eaurora.org>
[ Upstream commit e0371298ddc51761be257698554ea507ac8bf831 ]
If the hardware is still accessing memory after SMMU translation
is disabled (as part of smmu shutdown callback), then the
IOVAs (I/O virtual address) which it was using will go on the bus
as the physical addresses which will result in unknown crashes
like NoC/interconnect errors.
So, implement shutdown callback to i2c driver to stop on-going transfer
and unmap DMA mappings during system "reboot" or "shutdown".
Fixes: 37692de5d523 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi <rojay@...eaurora.org>
Reviewed-by: Akash Asthana <akashast@...eaurora.org>
Signed-off-by: Wolfram Sang <wsa@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/i2c/busses/i2c-qcom-geni.c | 34 ++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 214b4c913a139..c3f5847959116 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -375,6 +375,32 @@ static void geni_i2c_tx_msg_cleanup(struct geni_i2c_dev *gi2c,
}
}
+static void geni_i2c_stop_xfer(struct geni_i2c_dev *gi2c)
+{
+ int ret;
+ u32 geni_status;
+ struct i2c_msg *cur;
+
+ /* Resume device, as runtime suspend can happen anytime during transfer */
+ ret = pm_runtime_get_sync(gi2c->se.dev);
+ if (ret < 0) {
+ dev_err(gi2c->se.dev, "Failed to resume device: %d\n", ret);
+ return;
+ }
+
+ geni_status = readl_relaxed(gi2c->se.base + SE_GENI_STATUS);
+ if (geni_status & M_GENI_CMD_ACTIVE) {
+ cur = gi2c->cur;
+ geni_i2c_abort_xfer(gi2c);
+ if (cur->flags & I2C_M_RD)
+ geni_i2c_rx_msg_cleanup(gi2c, cur);
+ else
+ geni_i2c_tx_msg_cleanup(gi2c, cur);
+ }
+
+ pm_runtime_put_sync_suspend(gi2c->se.dev);
+}
+
static int geni_i2c_rx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
u32 m_param)
{
@@ -650,6 +676,13 @@ static int geni_i2c_remove(struct platform_device *pdev)
return 0;
}
+static void geni_i2c_shutdown(struct platform_device *pdev)
+{
+ struct geni_i2c_dev *gi2c = platform_get_drvdata(pdev);
+
+ geni_i2c_stop_xfer(gi2c);
+}
+
static int __maybe_unused geni_i2c_runtime_suspend(struct device *dev)
{
int ret;
@@ -714,6 +747,7 @@ MODULE_DEVICE_TABLE(of, geni_i2c_dt_match);
static struct platform_driver geni_i2c_driver = {
.probe = geni_i2c_probe,
.remove = geni_i2c_remove,
+ .shutdown = geni_i2c_shutdown,
.driver = {
.name = "geni_i2c",
.pm = &geni_i2c_pm_ops,
--
2.27.0
Powered by blists - more mailing lists