[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <YD3ysGd86zRjOLQa@kernel.org>
Date: Tue, 2 Mar 2021 10:09:20 +0200
From: Mike Rapoport <rppt@...nel.org>
To: Florian Fainelli <f.fainelli@...il.com>
Cc: linux-mips@...r.kernel.org, fancer.lancer@...il.com, guro@...com,
akpm@...ux-foundation.org, paul@...pouillou.net,
Serge Semin <Sergey.Semin@...kalelectronics.ru>,
Kamal Dasu <kdasu.kdev@...il.com>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Yanteng Si <siyanteng@...ngson.cn>,
Huacai Chen <chenhuacai@...nel.org>,
"open list:BROADCOM BMIPS MIPS ARCHITECTURE"
<bcm-kernel-feedback-list@...adcom.com>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] MIPS: BMIPS: Reserve exception base to prevent corruption
On Mon, Mar 01, 2021 at 08:19:38PM -0800, Florian Fainelli wrote:
> BMIPS is one of the few platforms that do change the exception base.
> After commit 2dcb39645441 ("memblock: do not start bottom-up allocations
> with kernel_end") we started seeing BMIPS boards fail to boot with the
> built-in FDT being corrupted.
>
> Before the cited commit, early allocations would be in the [kernel_end,
> RAM_END] range, but after commit they would be within [RAM_START +
> PAGE_SIZE, RAM_END].
>
> The custom exception base handler that is installed by
> bmips_ebase_setup() done for BMIPS5000 CPUs ends-up trampling on the
> memory region allocated by unflatten_and_copy_device_tree() thus
> corrupting the FDT used by the kernel.
>
> To fix this, we need to perform an early reservation of the custom
> exception that is going to be installed and this needs to happen at
> plat_mem_setup() time to ensure that unflatten_and_copy_device_tree()
> finds a space that is suitable, away from reserved memory.
>
> Huge thanks to Serget for analysing and proposing a solution to this
> issue.
>
> Fixes: Fixes: 2dcb39645441 ("memblock: do not start bottom-up allocations with kernel_end")
> Debugged-by: Serge Semin <Sergey.Semin@...kalelectronics.ru>
> Reported-by: Kamal Dasu <kdasu.kdev@...il.com>
> Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
Acked-by: Mike Rapoport <rppt@...ux.ibm.com>
> ---
> Thomas,
>
> This is intended as a stop-gap solution for 5.12-rc1 and to be picked up
> by the stable team for 5.11. We should find a safer way to avoid these
> problems for 5.13 maybe.
>
> arch/mips/bmips/setup.c | 22 ++++++++++++++++++++++
> arch/mips/include/asm/traps.h | 2 ++
> 2 files changed, 24 insertions(+)
>
> diff --git a/arch/mips/bmips/setup.c b/arch/mips/bmips/setup.c
> index 31bcfa4e08b9..0088bd45b892 100644
> --- a/arch/mips/bmips/setup.c
> +++ b/arch/mips/bmips/setup.c
> @@ -149,6 +149,26 @@ void __init plat_time_init(void)
> mips_hpt_frequency = freq;
> }
>
> +static void __init bmips_ebase_reserve(void)
> +{
> + phys_addr_t base, size = VECTORSPACING * 64;
> +
> + switch (current_cpu_type()) {
> + default:
> + case CPU_BMIPS4350:
> + return;
> + case CPU_BMIPS3300:
> + case CPU_BMIPS4380:
> + base = 0x0400;
> + break;
> + case CPU_BMIPS5000:
> + base = 0x1000;
> + break;
> + }
> +
> + memblock_reserve(base, size);
> +}
> +
> void __init plat_mem_setup(void)
> {
> void *dtb;
> @@ -169,6 +189,8 @@ void __init plat_mem_setup(void)
>
> __dt_setup_arch(dtb);
>
> + bmips_ebase_reserve();
> +
> for (q = bmips_quirk_list; q->quirk_fn; q++) {
> if (of_flat_dt_is_compatible(of_get_flat_dt_root(),
> q->compatible)) {
> diff --git a/arch/mips/include/asm/traps.h b/arch/mips/include/asm/traps.h
> index 6aa8f126a43d..0ba6bb7f9618 100644
> --- a/arch/mips/include/asm/traps.h
> +++ b/arch/mips/include/asm/traps.h
> @@ -14,6 +14,8 @@
> #define MIPS_BE_FIXUP 1 /* return to the fixup code */
> #define MIPS_BE_FATAL 2 /* treat as an unrecoverable error */
>
> +#define VECTORSPACING 0x100 /* for EI/VI mode */
> +
> extern void (*board_be_init)(void);
> extern int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
>
> --
> 2.25.1
>
--
Sincerely yours,
Mike.
Powered by blists - more mailing lists