| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210301161210.182366931@linuxfoundation.org>
Date: Mon, 1 Mar 2021 17:05:41 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Linus Walleij <linus.walleij@...aro.org>,
Sam Ravnborg <sam@...nborg.org>,
Stephan Gerhold <stephan@...hold.net>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 5.11 173/775] drm/panel: s6e63m0: Fix init sequence again
From: Linus Walleij <linus.walleij@...aro.org>
[ Upstream commit 47b1adc1d2a3b39233a56e183296b335222c9a6d ]
The DSI version of the panel behaved instable and close
scrutiny of the vendor driver from the Samsung
GT-S8190 shows a different initialization sequence for
the DSI mode panel than the DPI mode panel.
Make the initialization depend on whether we are in
DSI or DPI mode and handle the differences.
After this the panel on the GT-I8190 becomes much more
stable.
Also spell out some more custom DCS commands found in
the vendor source code to cut down a bit on magic
where we can.
Fixes: f0aee45ffc8b ("drm/panel: s6e63m0: Fix init sequence")
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
Reviewed-by: Sam Ravnborg <sam@...nborg.org>
Cc: Stephan Gerhold <stephan@...hold.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20201205122229.1952980-1-linus.walleij@linaro.org
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 42 ++++++++++++++-----
1 file changed, 32 insertions(+), 10 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c
index 6b4e97bfd46ee..bf6d704d4d272 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c
@@ -25,6 +25,14 @@
/* Manufacturer Command Set */
#define MCS_ELVSS_ON 0xb1
#define MCS_TEMP_SWIRE 0xb2
+#define MCS_PENTILE_1 0xb3
+#define MCS_PENTILE_2 0xb4
+#define MCS_GAMMA_DELTA_Y_RED 0xb5
+#define MCS_GAMMA_DELTA_X_RED 0xb6
+#define MCS_GAMMA_DELTA_Y_GREEN 0xb7
+#define MCS_GAMMA_DELTA_X_GREEN 0xb8
+#define MCS_GAMMA_DELTA_Y_BLUE 0xb9
+#define MCS_GAMMA_DELTA_X_BLUE 0xba
#define MCS_MIECTL1 0xc0
#define MCS_BCMODE 0xc1
#define MCS_ERROR_CHECK 0xd5
@@ -281,6 +289,7 @@ struct s6e63m0 {
struct backlight_device *bl_dev;
u8 lcd_type;
u8 elvss_pulse;
+ bool dsi_mode;
struct regulator_bulk_data supplies[2];
struct gpio_desc *reset_gpio;
@@ -395,9 +404,21 @@ static int s6e63m0_check_lcd_type(struct s6e63m0 *ctx)
static void s6e63m0_init(struct s6e63m0 *ctx)
{
- s6e63m0_dcs_write_seq_static(ctx, MCS_PANELCTL,
- 0x01, 0x27, 0x27, 0x07, 0x07, 0x54, 0x9f,
- 0x63, 0x8f, 0x1a, 0x33, 0x0d, 0x00, 0x00);
+ /*
+ * We do not know why there is a difference in the DSI mode.
+ * (No datasheet.)
+ *
+ * In the vendor driver this sequence is called
+ * "SEQ_PANEL_CONDITION_SET" or "DCS_CMD_SEQ_PANEL_COND_SET".
+ */
+ if (ctx->dsi_mode)
+ s6e63m0_dcs_write_seq_static(ctx, MCS_PANELCTL,
+ 0x01, 0x2c, 0x2c, 0x07, 0x07, 0x5f, 0xb3,
+ 0x6d, 0x97, 0x1d, 0x3a, 0x0f, 0x00, 0x00);
+ else
+ s6e63m0_dcs_write_seq_static(ctx, MCS_PANELCTL,
+ 0x01, 0x27, 0x27, 0x07, 0x07, 0x54, 0x9f,
+ 0x63, 0x8f, 0x1a, 0x33, 0x0d, 0x00, 0x00);
s6e63m0_dcs_write_seq_static(ctx, MCS_DISCTL,
0x02, 0x03, 0x1c, 0x10, 0x10);
@@ -414,40 +435,40 @@ static void s6e63m0_init(struct s6e63m0 *ctx)
s6e63m0_dcs_write_seq_static(ctx, MCS_SRCCTL,
0x00, 0x8e, 0x07);
- s6e63m0_dcs_write_seq_static(ctx, 0xb3, 0x6c);
+ s6e63m0_dcs_write_seq_static(ctx, MCS_PENTILE_1, 0x6c);
- s6e63m0_dcs_write_seq_static(ctx, 0xb5,
+ s6e63m0_dcs_write_seq_static(ctx, MCS_GAMMA_DELTA_Y_RED,
0x2c, 0x12, 0x0c, 0x0a, 0x10, 0x0e, 0x17,
0x13, 0x1f, 0x1a, 0x2a, 0x24, 0x1f, 0x1b,
0x1a, 0x17, 0x2b, 0x26, 0x22, 0x20, 0x3a,
0x34, 0x30, 0x2c, 0x29, 0x26, 0x25, 0x23,
0x21, 0x20, 0x1e, 0x1e);
- s6e63m0_dcs_write_seq_static(ctx, 0xb6,
+ s6e63m0_dcs_write_seq_static(ctx, MCS_GAMMA_DELTA_X_RED,
0x00, 0x00, 0x11, 0x22, 0x33, 0x44, 0x44,
0x44, 0x55, 0x55, 0x66, 0x66, 0x66, 0x66,
0x66, 0x66);
- s6e63m0_dcs_write_seq_static(ctx, 0xb7,
+ s6e63m0_dcs_write_seq_static(ctx, MCS_GAMMA_DELTA_Y_GREEN,
0x2c, 0x12, 0x0c, 0x0a, 0x10, 0x0e, 0x17,
0x13, 0x1f, 0x1a, 0x2a, 0x24, 0x1f, 0x1b,
0x1a, 0x17, 0x2b, 0x26, 0x22, 0x20, 0x3a,
0x34, 0x30, 0x2c, 0x29, 0x26, 0x25, 0x23,
0x21, 0x20, 0x1e, 0x1e);
- s6e63m0_dcs_write_seq_static(ctx, 0xb8,
+ s6e63m0_dcs_write_seq_static(ctx, MCS_GAMMA_DELTA_X_GREEN,
0x00, 0x00, 0x11, 0x22, 0x33, 0x44, 0x44,
0x44, 0x55, 0x55, 0x66, 0x66, 0x66, 0x66,
0x66, 0x66);
- s6e63m0_dcs_write_seq_static(ctx, 0xb9,
+ s6e63m0_dcs_write_seq_static(ctx, MCS_GAMMA_DELTA_Y_BLUE,
0x2c, 0x12, 0x0c, 0x0a, 0x10, 0x0e, 0x17,
0x13, 0x1f, 0x1a, 0x2a, 0x24, 0x1f, 0x1b,
0x1a, 0x17, 0x2b, 0x26, 0x22, 0x20, 0x3a,
0x34, 0x30, 0x2c, 0x29, 0x26, 0x25, 0x23,
0x21, 0x20, 0x1e, 0x1e);
- s6e63m0_dcs_write_seq_static(ctx, 0xba,
+ s6e63m0_dcs_write_seq_static(ctx, MCS_GAMMA_DELTA_X_BLUE,
0x00, 0x00, 0x11, 0x22, 0x33, 0x44, 0x44,
0x44, 0x55, 0x55, 0x66, 0x66, 0x66, 0x66,
0x66, 0x66);
@@ -704,6 +725,7 @@ int s6e63m0_probe(struct device *dev,
if (!ctx)
return -ENOMEM;
+ ctx->dsi_mode = dsi_mode;
ctx->dcs_read = dcs_read;
ctx->dcs_write = dcs_write;
dev_set_drvdata(dev, ctx);
--
2.27.0
Powered by blists - more mailing lists