linux-kernel - Re: [PATCH] mmc: Try power cycling card if command request times out

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210304145946.tnbbd4qq6nvc2mcb@axis.com>
Date:   Thu, 4 Mar 2021 15:59:46 +0100
From:   Marten Lindahl <martenli@...s.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>
CC:     Mårten Lindahl <Marten.Lindahl@...s.com>,
        Adrian Hunter <adrian.hunter@...el.com>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        kernel <kernel@...s.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] mmc: Try power cycling card if command request times out

On Thu, Mar 04, 2021 at 03:06:54PM +0100, Ulf Hansson wrote:
> On Thu, 4 Mar 2021 at 14:48, Marten Lindahl <martenli@...s.com> wrote:
> >
> > Hi Ulf! My apologies for the delay.
> >
> > On Tue, Mar 02, 2021 at 09:45:02AM +0100, Ulf Hansson wrote:
> > > On Mon, 1 Mar 2021 at 22:59, Marten Lindahl <martenli@...s.com> wrote:
> > > >
> > > > Hi Ulf!
> > > >
> > > > Thank you for your comments!
> > > >
> > > > On Mon, Mar 01, 2021 at 09:50:56AM +0100, Ulf Hansson wrote:
> > > > > + Adrian
> > > > >
> > > > > On Tue, 16 Feb 2021 at 23:43, Mårten Lindahl <marten.lindahl@...s.com> wrote:
> > > > > >
> > > > > > Sometimes SD cards that has been run for a long time enters a state
> > > > > > where it cannot by itself be recovered, but needs a power cycle to be
> > > > > > operational again. Card status analysis has indicated that the card can
> > > > > > end up in a state where all external commands are ignored by the card
> > > > > > since it is halted by data timeouts.
> > > > > >
> > > > > > If the card has been heavily used for a long time it can be weared out,
> > > > > > and should typically be replaced. But on some tests, it shows that the
> > > > > > card can still be functional after a power cycle, but as it requires an
> > > > > > operator to do it, the card can remain in a non-operational state for a
> > > > > > long time until the problem has been observed by the operator.
> > > > > >
> > > > > > This patch adds function to power cycle the card in case it does not
> > > > > > respond to a command, and then resend the command if the power cycle
> > > > > > was successful. This procedure will be tested 1 time before giving up,
> > > > > > and resuming host operation as normal.
> > > > >
> > > > > I assume the context above is all about the ioctl interface?
> > > > >
> > > >
> > > > Yes, that's correct. The problem we have seen is triggered by ioctls.
> > > >
> > > > > So, when the card enters this non functional state, have you tried
> > > > > just reading a block through the regular I/O interface. Does it
> > > > > trigger a power cycle of the card - and then makes it functional
> > > > > again?
> > > > >
> > > >
> > > > Yes, we have tried that, and it does trigger a power cycle, making the card
> > > > operational again. But as it requires an operator to trigger it, I thought
> > > > it might be something that could be automated here. At least once.
> > >
> > > Not sure what you mean by operator here? In the end it's a userspace
> > > program running and I assume it can deal with error paths. :-)
> > >
> > > In any case, I understand your point.
> > >
> >
> > Yes, we have a userspace program. So if the userspace program will try to
> > restore the card in a situation such as the one we are trying to solve
> > here, how shall it perform it? Is it expected that a ioctl CMD0 request
> > should be enough, or is there any other support for a userspace program to
> > reset the card?
> 
> Correct, there is no way for userspace to reset cards through an ioctl.
> 
> >
> > If it falls on a ioctl command to reset the card, how do we handle the case
> > where the ioctl times out anyway? Or is the only way for a userspace program
> > to restore the card, to make a block transfer that fails?
> 
> Yes, that is what I was thinking. According to the use case you have
> described, this should be possible for you to implement as a part of
> your userspace program, no?

Ok, I will discuss that with the people maintaining the userspace program :)

But would it be of interest to review a patch introducing a more clean card
reset request, without block transfers?

Kind regards
Mårten

> 
> [...]
> 
> Kind regards
> Uffe