| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210304150215.80652-2-andriy.shevchenko@linux.intel.com>
Date: Thu, 4 Mar 2021 17:02:11 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Linus Walleij <linus.walleij@...aro.org>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-acpi@...r.kernel.org
Cc: Marc Zyngier <maz@...nel.org>, Jonathan Corbet <corbet@....net>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Thomas Gleixner <tglx@...utronix.de>,
"Rafael J. Wysocki" <rafael@...nel.org>
Subject: [PATCH v2 1/5] irqdomain: Introduce irq_domain_create_simple() API
Linus Walleij pointed out that ird_domain_add_simple() gained
additional functionality and can't be anymore replaced with
a simple conditional. In preparation to upgrade GPIO library
to use fwnode, introduce irq_domain_create_simple() API which is
functional equivalent to the existing irq_domain_add_simple(),
but takes a pointer to the struct fwnode_handle as a parameter.
While at it, amend documentation to mention irq_domain_create_*()
functions where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
Documentation/core-api/irq/irq-domain.rst | 22 ++++++++++++----------
include/linux/irqdomain.h | 5 +++++
kernel/irq/irqdomain.c | 16 +++++++++++++---
3 files changed, 30 insertions(+), 13 deletions(-)
diff --git a/Documentation/core-api/irq/irq-domain.rst b/Documentation/core-api/irq/irq-domain.rst
index a77c24c27f7b..8214e215a8bf 100644
--- a/Documentation/core-api/irq/irq-domain.rst
+++ b/Documentation/core-api/irq/irq-domain.rst
@@ -42,10 +42,10 @@ irq_domain usage
================
An interrupt controller driver creates and registers an irq_domain by
-calling one of the irq_domain_add_*() functions (each mapping method
-has a different allocator function, more on that later). The function
-will return a pointer to the irq_domain on success. The caller must
-provide the allocator function with an irq_domain_ops structure.
+calling one of the irq_domain_add_*() or irq_domain_create_*() functions
+(each mapping method has a different allocator function, more on that later).
+The function will return a pointer to the irq_domain on success. The caller
+must provide the allocator function with an irq_domain_ops structure.
In most cases, the irq_domain will begin empty without any mappings
between hwirq and IRQ numbers. Mappings are added to the irq_domain
@@ -147,6 +147,7 @@ Legacy
irq_domain_add_simple()
irq_domain_add_legacy()
irq_domain_add_legacy_isa()
+ irq_domain_create_simple()
irq_domain_create_legacy()
The Legacy mapping is a special case for drivers that already have a
@@ -169,13 +170,13 @@ supported. For example, ISA controllers would use the legacy map for
mapping Linux IRQs 0-15 so that existing ISA drivers get the correct IRQ
numbers.
-Most users of legacy mappings should use irq_domain_add_simple() which
-will use a legacy domain only if an IRQ range is supplied by the
-system and will otherwise use a linear domain mapping. The semantics
-of this call are such that if an IRQ range is specified then
+Most users of legacy mappings should use irq_domain_add_simple() or
+irq_domain_create_simple() which will use a legacy domain only if an IRQ range
+is supplied by the system and will otherwise use a linear domain mapping.
+The semantics of this call are such that if an IRQ range is specified then
descriptors will be allocated on-the-fly for it, and if no range is
-specified it will fall through to irq_domain_add_linear() which means
-*no* irq descriptors will be allocated.
+specified it will fall through to irq_domain_add_linear() or
+irq_domain_create_linear() which means *no* irq descriptors will be allocated.
A typical use case for simple domains is where an irqchip provider
is supporting both dynamic and static IRQ assignments.
@@ -186,6 +187,7 @@ that the driver using the simple domain call irq_create_mapping()
before any irq_find_mapping() since the latter will actually work
for the static IRQ assignment case.
+irq_domain_add_simple() and irq_domain_create_simple() as well as
irq_domain_add_legacy() and irq_domain_create_legacy() are functionally
equivalent, except for the first argument is different - the former
accepts an Open Firmware specific 'struct device_node', while the latter
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index 42d196805f58..1d4a8e7c5d5f 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -265,6 +265,11 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
unsigned int first_irq,
const struct irq_domain_ops *ops,
void *host_data);
+struct irq_domain *irq_domain_create_simple(struct fwnode_handle *fwnode,
+ unsigned int size,
+ unsigned int first_irq,
+ const struct irq_domain_ops *ops,
+ void *host_data);
struct irq_domain *irq_domain_add_legacy(struct device_node *of_node,
unsigned int size,
unsigned int first_irq,
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index 288151393a06..418548ea13cf 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -317,10 +317,20 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
unsigned int first_irq,
const struct irq_domain_ops *ops,
void *host_data)
+{
+ return irq_domain_create_simple(of_node_to_fwnode(of_node), size, first_irq, ops, host_data);
+}
+EXPORT_SYMBOL_GPL(irq_domain_add_simple);
+
+struct irq_domain *irq_domain_create_simple(struct fwnode_handle *fwnode,
+ unsigned int size,
+ unsigned int first_irq,
+ const struct irq_domain_ops *ops,
+ void *host_data)
{
struct irq_domain *domain;
- domain = __irq_domain_add(of_node_to_fwnode(of_node), size, size, 0, ops, host_data);
+ domain = __irq_domain_add(fwnode, size, size, 0, ops, host_data);
if (!domain)
return NULL;
@@ -328,7 +338,7 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
if (IS_ENABLED(CONFIG_SPARSE_IRQ)) {
/* attempt to allocated irq_descs */
int rc = irq_alloc_descs(first_irq, first_irq, size,
- of_node_to_nid(of_node));
+ of_node_to_nid(to_of_node(fwnode)));
if (rc < 0)
pr_info("Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
first_irq);
@@ -338,7 +348,7 @@ struct irq_domain *irq_domain_add_simple(struct device_node *of_node,
return domain;
}
-EXPORT_SYMBOL_GPL(irq_domain_add_simple);
+EXPORT_SYMBOL_GPL(irq_domain_create_simple);
/**
* irq_domain_add_legacy() - Allocate and register a legacy revmap irq_domain.
--
2.30.1
Powered by blists - more mailing lists