| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAAEAJfDyHYGf+J6WDHchVATOvj5AJpO8dkAStiNGNobJ9Uz8Yw@mail.gmail.com>
Date: Wed, 3 Mar 2021 18:30:12 -0300
From: Ezequiel Garcia <ezequiel@...guardiasur.com.ar>
To: Alexandre Courbot <acourbot@...omium.org>
Cc: Tiffany Lin <tiffany.lin@...iatek.com>,
Andrew-CT Chen <andrew-ct.chen@...iatek.com>,
Rob Herring <robh+dt@...nel.org>,
Yunfei Dong <yunfei.dong@...iatek.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
linux-media <linux-media@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>
Subject: Re: [PATCH v3 05/15] media: mtk-vcodec: vdec: support stateless API
Hello Alex,
Thanks for the patch.
On Fri, 26 Feb 2021 at 07:06, Alexandre Courbot <acourbot@...omium.org> wrote:
>
> From: Yunfei Dong <yunfei.dong@...iatek.com>
>
> Support the stateless codec API that will be used by MT8183.
>
> Signed-off-by: Yunfei Dong <yunfei.dong@...iatek.com>
> [acourbot: refactor, cleanup and split]
> Co-developed-by: Alexandre Courbot <acourbot@...omium.org>
> Signed-off-by: Alexandre Courbot <acourbot@...omium.org>
> ---
> drivers/media/platform/mtk-vcodec/Makefile | 1 +
> .../platform/mtk-vcodec/mtk_vcodec_dec.c | 66 ++-
> .../platform/mtk-vcodec/mtk_vcodec_dec.h | 9 +-
> .../mtk-vcodec/mtk_vcodec_dec_stateless.c | 427 ++++++++++++++++++
> .../platform/mtk-vcodec/mtk_vcodec_drv.h | 3 +
> 5 files changed, 503 insertions(+), 3 deletions(-)
> create mode 100644 drivers/media/platform/mtk-vcodec/mtk_vcodec_dec_stateless.c
>
[..]
> +
> +static const struct mtk_stateless_control mtk_stateless_controls[] = {
> + {
> + .cfg = {
> + .id = V4L2_CID_STATELESS_H264_SPS,
> + },
> + .codec_type = V4L2_PIX_FMT_H264_SLICE,
> + .needed_in_request = true,
This "needed_in_request" is not really required, as controls
are not volatile, and their value is stored per-context (per-fd).
It's perfectly valid for an application to pass the SPS control
at the beginning of the sequence, and then omit it
in further requests.
> + },
> + {
> + .cfg = {
> + .id = V4L2_CID_STATELESS_H264_PPS,
> + },
> + .codec_type = V4L2_PIX_FMT_H264_SLICE,
> + .needed_in_request = true,
> + },
> + {
> + .cfg = {
> + .id = V4L2_CID_STATELESS_H264_SCALING_MATRIX,
> + },
> + .codec_type = V4L2_PIX_FMT_H264_SLICE,
> + .needed_in_request = true,
> + },
> + {
> + .cfg = {
> + .id = V4L2_CID_STATELESS_H264_DECODE_PARAMS,
> + },
> + .codec_type = V4L2_PIX_FMT_H264_SLICE,
> + .needed_in_request = true,
> + },
> + {
> + .cfg = {
> + .id = V4L2_CID_MPEG_VIDEO_H264_PROFILE,
> + .def = V4L2_MPEG_VIDEO_H264_PROFILE_MAIN,
> + .max = V4L2_MPEG_VIDEO_H264_PROFILE_HIGH,
> + .menu_skip_mask =
> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_BASELINE) |
> + BIT(V4L2_MPEG_VIDEO_H264_PROFILE_EXTENDED),
> + },
> + .codec_type = V4L2_PIX_FMT_H264_SLICE,
> + },
> + {
> + .cfg = {
> + .id = V4L2_CID_STATELESS_H264_DECODE_MODE,
> + .min = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> + .def = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> + .max = V4L2_STATELESS_H264_DECODE_MODE_FRAME_BASED,
> + },
> + .codec_type = V4L2_PIX_FMT_H264_SLICE,
> + },
> +};
Applications also need to know which V4L2_CID_STATELESS_H264_START_CODE
the driver supports. From a next patch, this case seems to be
V4L2_STATELESS_H264_START_CODE_ANNEX_B.
> +#define NUM_CTRLS ARRAY_SIZE(mtk_stateless_controls)
> +
> +static const struct mtk_video_fmt mtk_video_formats[] = {
> + {
> + .fourcc = V4L2_PIX_FMT_H264_SLICE,
> + .type = MTK_FMT_DEC,
> + .num_planes = 1,
> + },
> + {
> + .fourcc = V4L2_PIX_FMT_MM21,
> + .type = MTK_FMT_FRAME,
> + .num_planes = 2,
> + },
> +};
> +#define NUM_FORMATS ARRAY_SIZE(mtk_video_formats)
> +#define DEFAULT_OUT_FMT_IDX 0
> +#define DEFAULT_CAP_FMT_IDX 1
> +
> +static const struct mtk_codec_framesizes mtk_vdec_framesizes[] = {
> + {
> + .fourcc = V4L2_PIX_FMT_H264_SLICE,
> + .stepwise = {
> + MTK_VDEC_MIN_W, MTK_VDEC_MAX_W, 16,
> + MTK_VDEC_MIN_H, MTK_VDEC_MAX_H, 16,
> + },
> + },
> +};
> +
> +#define NUM_SUPPORTED_FRAMESIZE ARRAY_SIZE(mtk_vdec_framesizes)
> +
> +static void mtk_vdec_stateless_set_dst_payload(struct mtk_vcodec_ctx *ctx,
> + struct vdec_fb *fb)
> +{
> + struct mtk_video_dec_buf *vdec_frame_buf =
> + container_of(fb, struct mtk_video_dec_buf, frame_buffer);
> + struct vb2_v4l2_buffer *vb = &vdec_frame_buf->m2m_buf.vb;
> + unsigned int cap_y_size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
> +
> + vb2_set_plane_payload(&vb->vb2_buf, 0, cap_y_size);
> + if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
> + unsigned int cap_c_size =
> + ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> +
> + vb2_set_plane_payload(&vb->vb2_buf, 1, cap_c_size);
> + }
> +}
> +
> +static struct vdec_fb *vdec_get_cap_buffer(struct mtk_vcodec_ctx *ctx,
> + struct vb2_v4l2_buffer *vb2_v4l2)
> +{
> + struct mtk_video_dec_buf *framebuf =
> + container_of(vb2_v4l2, struct mtk_video_dec_buf, m2m_buf.vb);
> + struct vdec_fb *pfb = &framebuf->frame_buffer;
> + struct vb2_buffer *dst_buf = &vb2_v4l2->vb2_buf;
> +
> + pfb = &framebuf->frame_buffer;
> + pfb->base_y.va = vb2_plane_vaddr(dst_buf, 0);
Are you sure you need a CPU mapping? It seems strange.
I'll comment some more on the next patch(es).
> + pfb->base_y.dma_addr = vb2_dma_contig_plane_dma_addr(dst_buf, 0);
> + pfb->base_y.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[0];
> +
> + if (ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes == 2) {
> + pfb->base_c.va = vb2_plane_vaddr(dst_buf, 1);
> + pfb->base_c.dma_addr =
> + vb2_dma_contig_plane_dma_addr(dst_buf, 1);
> + pfb->base_c.size = ctx->q_data[MTK_Q_DATA_DST].sizeimage[1];
> + }
> + mtk_v4l2_debug(1,
> + "id=%d Framebuf pfb=%p VA=%p Y_DMA=%pad C_DMA=%pad Size=%zx frame_count = %d",
> + dst_buf->index, pfb,
> + pfb->base_y.va, &pfb->base_y.dma_addr,
> + &pfb->base_c.dma_addr, pfb->base_y.size,
> + ctx->decoded_frame_cnt);
> +
> + return pfb;
> +}
> +
> +static void vb2ops_vdec_buf_request_complete(struct vb2_buffer *vb)
> +{
> + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> +
> + v4l2_ctrl_request_complete(vb->req_obj.req, &ctx->ctrl_hdl);
> +}
> +
> +static int fops_media_request_validate(struct media_request *mreq)
> +{
> + const unsigned int buffer_cnt = vb2_request_buffer_cnt(mreq);
> + struct mtk_vcodec_ctx *ctx = NULL;
> + struct media_request_object *req_obj;
> + struct v4l2_ctrl_handler *parent_hdl, *hdl;
> + struct v4l2_ctrl *ctrl;
> + unsigned int i;
> +
> + switch (buffer_cnt) {
> + case 1:
> + /* We expect exactly one buffer with the request */
> + break;
> + case 0:
> + mtk_v4l2_err("No buffer provided with the request");
> + return -ENOENT;
> + default:
> + mtk_v4l2_err("Too many buffers (%d) provided with the request",
> + buffer_cnt);
> + return -EINVAL;
> + }
> +
> + list_for_each_entry(req_obj, &mreq->objects, list) {
> + struct vb2_buffer *vb;
> +
> + if (vb2_request_object_is_buffer(req_obj)) {
> + vb = container_of(req_obj, struct vb2_buffer, req_obj);
> + ctx = vb2_get_drv_priv(vb->vb2_queue);
> + break;
> + }
> + }
> +
> + if (!ctx) {
> + mtk_v4l2_err("Cannot find buffer for request");
> + return -ENOENT;
> + }
> +
> + parent_hdl = &ctx->ctrl_hdl;
> +
> + hdl = v4l2_ctrl_request_hdl_find(mreq, parent_hdl);
> + if (!hdl) {
> + mtk_v4l2_err("Cannot find control handler for request\n");
> + return -ENOENT;
> + }
> +
> + for (i = 0; i < NUM_CTRLS; i++) {
> + if (mtk_stateless_controls[i].codec_type != ctx->current_codec)
> + continue;
> + if (!mtk_stateless_controls[i].needed_in_request)
> + continue;
> +
> + ctrl = v4l2_ctrl_request_hdl_ctrl_find(hdl,
> + mtk_stateless_controls[i].cfg.id);
> + if (!ctrl) {
> + mtk_v4l2_err("Missing required codec control\n");
> + return -ENOENT;
> + }
> + }
> +
> + v4l2_ctrl_request_hdl_put(hdl);
> +
> + return vb2_request_validate(mreq);
> +}
> +
> +static void mtk_vdec_worker(struct work_struct *work)
> +{
> + struct mtk_vcodec_ctx *ctx =
> + container_of(work, struct mtk_vcodec_ctx, decode_work);
> + struct mtk_vcodec_dev *dev = ctx->dev;
> + struct vb2_v4l2_buffer *vb2_v4l2_src, *vb2_v4l2_dst;
> + struct vb2_buffer *vb2_src;
> + struct mtk_vcodec_mem *bs_src;
> + struct mtk_video_dec_buf *dec_buf_src;
> + struct media_request *src_buf_req;
> + struct vdec_fb *dst_buf;
> + bool res_chg = false;
> + int ret;
> +
> + vb2_v4l2_src = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
> + if (vb2_v4l2_src == NULL) {
> + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> + mtk_v4l2_debug(1, "[%d] no available source buffer", ctx->id);
> + return;
> + }
> +
> + vb2_v4l2_dst = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
> + if (vb2_v4l2_dst == NULL) {
> + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> + mtk_v4l2_debug(1, "[%d] no available destination buffer", ctx->id);
> + return;
> + }
> +
> + vb2_src = &vb2_v4l2_src->vb2_buf;
> + dec_buf_src = container_of(vb2_v4l2_src, struct mtk_video_dec_buf,
> + m2m_buf.vb);
> + bs_src = &dec_buf_src->bs_buffer;
> +
> + mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p buf_info = %p",
> + ctx->id, src_buf->vb2_queue->type,
> + src_buf->index, src_buf, src_buf_info);
> +
> + bs_src->va = vb2_plane_vaddr(vb2_src, 0);
> + bs_src->dma_addr = vb2_dma_contig_plane_dma_addr(vb2_src, 0);
> + bs_src->size = (size_t)vb2_src->planes[0].bytesused;
> + if (!bs_src->va) {
> + v4l2_m2m_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx);
> + mtk_v4l2_err("[%d] id=%d source buffer is NULL", ctx->id,
> + vb2_src->index);
> + return;
> + }
> +
> + mtk_v4l2_debug(3, "[%d] Bitstream VA=%p DMA=%pad Size=%zx vb=%p",
> + ctx->id, buf->va, &buf->dma_addr, buf->size, src_buf);
> + /* Apply request controls. */
> + src_buf_req = vb2_src->req_obj.req;
> + if (src_buf_req)
> + v4l2_ctrl_request_setup(src_buf_req, &ctx->ctrl_hdl);
> + else
> + mtk_v4l2_err("vb2 buffer media request is NULL");
> +
> + dst_buf = vdec_get_cap_buffer(ctx, vb2_v4l2_dst);
> + v4l2_m2m_buf_copy_metadata(vb2_v4l2_src, vb2_v4l2_dst, true);
> + ret = vdec_if_decode(ctx, bs_src, dst_buf, &res_chg);
> + if (ret) {
> + mtk_v4l2_err(
> + " <===[%d], src_buf[%d] sz=0x%zx pts=%llu vdec_if_decode() ret=%d res_chg=%d===>",
> + ctx->id, vb2_src->index, bs_src->size,
> + vb2_src->timestamp, ret, res_chg);
> + if (ret == -EIO) {
> + mutex_lock(&ctx->lock);
> + dec_buf_src->error = true;
> + mutex_unlock(&ctx->lock);
> + }
> + }
> +
> + mtk_vdec_stateless_set_dst_payload(ctx, dst_buf);
> +
> + v4l2_m2m_buf_done_and_job_finish(dev->m2m_dev_dec, ctx->m2m_ctx,
> + ret ? VB2_BUF_STATE_ERROR : VB2_BUF_STATE_DONE);
> +
> + v4l2_ctrl_request_complete(src_buf_req, &ctx->ctrl_hdl);
> +}
> +
> +static void vb2ops_vdec_stateless_buf_queue(struct vb2_buffer *vb)
> +{
> + struct mtk_vcodec_ctx *ctx = vb2_get_drv_priv(vb->vb2_queue);
> + struct vb2_v4l2_buffer *vb2_v4l2 = to_vb2_v4l2_buffer(vb);
> +
> + mtk_v4l2_debug(3, "[%d] (%d) id=%d, vb=%p",
> + ctx->id, vb->vb2_queue->type,
> + vb->index, vb);
> +
> + mutex_lock(&ctx->lock);
> + v4l2_m2m_buf_queue(ctx->m2m_ctx, vb2_v4l2);
> + mutex_unlock(&ctx->lock);
> + if (vb->vb2_queue->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE)
> + return;
> +
> + mtk_v4l2_debug(3, "(%d) id=%d, bs=%p",
> + vb->vb2_queue->type, vb->index, src_buf);
> +
> + /* If an OUTPUT buffer, we may need to update the state */
> + if (ctx->state == MTK_STATE_INIT) {
> + ctx->state = MTK_STATE_HEADER;
> + mtk_v4l2_debug(1, "Init driver from init to header.");
This state thing seems just something to make the rest
of the stateful-based driver happy, right?
Makes me wonder a bit if just splitting the stateless part to its
own driver, wouldn't make your maintenance easier.
What's the motivation for sharing the driver?
> + } else {
> + mtk_v4l2_debug(3, "[%d] already init driver %d",
> + ctx->id, ctx->state);
> + }
> +}
> +
> +static int mtk_vdec_flush_decoder(struct mtk_vcodec_ctx *ctx)
> +{
> + bool res_chg;
> +
> + return vdec_if_decode(ctx, NULL, NULL, &res_chg);
> +}
> +
> +static const struct v4l2_ctrl_ops mtk_vcodec_dec_ctrl_ops = {
> + .g_volatile_ctrl = mtk_vdec_g_v_ctrl,
> +};
> +
> +static int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_ctx *ctx)
> +{
> + struct v4l2_ctrl *ctrl;
> + unsigned int i;
> +
> + v4l2_ctrl_handler_init(&ctx->ctrl_hdl, NUM_CTRLS);
> + if (ctx->ctrl_hdl.error) {
> + mtk_v4l2_err("v4l2_ctrl_handler_init failed\n");
> + return ctx->ctrl_hdl.error;
> + }
> +
> + ctrl = v4l2_ctrl_new_std(&ctx->ctrl_hdl,
> + &mtk_vcodec_dec_ctrl_ops,
> + V4L2_CID_MIN_BUFFERS_FOR_CAPTURE,
> + 0, 32, 1, 1);
> + ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;
Hm, this volatile control for MIN_BUFFERS_FOR_CAPTURE seems
to return the DPB size. However, isn't this something userspace already knows?
> +
> + for (i = 0; i < NUM_CTRLS; i++) {
> + struct v4l2_ctrl_config cfg = mtk_stateless_controls[i].cfg;
> +
> + v4l2_ctrl_new_custom(&ctx->ctrl_hdl, &cfg, NULL);
> + if (ctx->ctrl_hdl.error) {
> + mtk_v4l2_err("Adding control %d failed %d",
> + i, ctx->ctrl_hdl.error);
> + return ctx->ctrl_hdl.error;
> + }
> + }
> +
> + v4l2_ctrl_handler_setup(&ctx->ctrl_hdl);
> +
> + return 0;
> +}
> +
> +const struct media_device_ops mtk_vcodec_media_ops = {
> + .req_validate = fops_media_request_validate,
> + .req_queue = v4l2_m2m_request_queue,
> +};
> +
> +static void mtk_init_vdec_params(struct mtk_vcodec_ctx *ctx)
> +{
> + struct vb2_queue *src_vq;
> +
> + src_vq = v4l2_m2m_get_vq(ctx->m2m_ctx,
> + V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE);
> +
> + /* Support request api for output plane */
> + src_vq->supports_requests = true;
> + src_vq->requires_requests = true;
> +}
> +
> +static int vb2ops_vdec_out_buf_validate(struct vb2_buffer *vb)
> +{
I have to admit I do not remember exactly the reason,
but this should set the buffer field to V4L2_FIELD_NONE.
Thanks,
Ezequiel
Powered by blists - more mailing lists