| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210304044803.812204-5-danielwa@cisco.com>
Date: Wed, 3 Mar 2021 20:48:02 -0800
From: Daniel Walker <danielwa@...co.com>
To: Will Deacon <will@...nel.org>,
Christophe Leroy <christophe.leroy@...roup.eu>,
ob Herring <robh@...nel.org>,
Daniel Gimpelevich <daniel@...pelevich.san-francisco.ca.us>,
Andrew Morton <akpm@...ux-foundation.org>, x86@...nel.org,
linux-mips@...r.kernel.org, linuxppc-dev@...ts.ozlabs.org,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>, Borislav Petkov <bp@...en8.de>,
"H. Peter Anvin" <hpa@...or.com>
Cc: xe-linux-external@...co.com,
Ruslan Ruslichenko <rruslich@...co.com>,
Ruslan Bilovol <ruslan.bilovol@...il.com>,
Ard Biesheuvel <ardb@...nel.org>, linux-kernel@...r.kernel.org,
linux-efi@...r.kernel.org
Subject: [PATCH 5/5] CMDLINE: x86: convert to generic builtin command line
This updates the x86 code to use the CONFIG_GENERIC_CMDLINE
option.
Cc: xe-linux-external@...co.com
Signed-off-by: Ruslan Ruslichenko <rruslich@...co.com>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@...il.com>
Signed-off-by: Daniel Walker <danielwa@...co.com>
---
arch/x86/Kconfig | 44 +------------------------
arch/x86/kernel/setup.c | 18 ++--------
drivers/firmware/efi/libstub/x86-stub.c | 2 +-
3 files changed, 4 insertions(+), 60 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 21f851179ff0..3950f9bf9855 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -115,6 +115,7 @@ config X86
select EDAC_SUPPORT
select GENERIC_CLOCKEVENTS_BROADCAST if X86_64 || (X86_32 && X86_LOCAL_APIC)
select GENERIC_CLOCKEVENTS_MIN_ADJUST
+ select GENERIC_CMDLINE
select GENERIC_CMOS_UPDATE
select GENERIC_CPU_AUTOPROBE
select GENERIC_CPU_VULNERABILITIES
@@ -2368,49 +2369,6 @@ choice
endchoice
-config CMDLINE_BOOL
- bool "Built-in kernel command line"
- help
- Allow for specifying boot arguments to the kernel at
- build time. On some systems (e.g. embedded ones), it is
- necessary or convenient to provide some or all of the
- kernel boot arguments with the kernel itself (that is,
- to not rely on the boot loader to provide them.)
-
- To compile command line arguments into the kernel,
- set this option to 'Y', then fill in the
- boot arguments in CONFIG_CMDLINE.
-
- Systems with fully functional boot loaders (i.e. non-embedded)
- should leave this option set to 'N'.
-
-config CMDLINE
- string "Built-in kernel command string"
- depends on CMDLINE_BOOL
- default ""
- help
- Enter arguments here that should be compiled into the kernel
- image and used at boot time. If the boot loader provides a
- command line at boot time, it is appended to this string to
- form the full kernel command line, when the system boots.
-
- However, you can use the CONFIG_CMDLINE_OVERRIDE option to
- change this behavior.
-
- In most cases, the command line (whether built-in or provided
- by the boot loader) should specify the device for the root
- file system.
-
-config CMDLINE_OVERRIDE
- bool "Built-in command line overrides boot loader arguments"
- depends on CMDLINE_BOOL && CMDLINE != ""
- help
- Set this option to 'Y' to have the kernel ignore the boot loader
- command line, and use ONLY the built-in command line.
-
- This is used to work around broken boot loaders. This should
- be set to 'N' under normal conditions.
-
config MODIFY_LDT_SYSCALL
bool "Enable the LDT (local descriptor table)" if EXPERT
default y
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 740f3bdb3f61..e748c3e5c1ae 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -48,6 +48,7 @@
#include <asm/unwind.h>
#include <asm/vsyscall.h>
#include <linux/vmalloc.h>
+#include <linux/cmdline.h>
/*
* max_low_pfn_mapped: highest directly mapped pfn < 4 GB
@@ -162,9 +163,6 @@ unsigned long saved_video_mode;
#define RAMDISK_LOAD_FLAG 0x4000
static char __initdata command_line[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-#endif
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
@@ -884,19 +882,7 @@ void __init setup_arch(char **cmdline_p)
bss_resource.start = __pa_symbol(__bss_start);
bss_resource.end = __pa_symbol(__bss_stop)-1;
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
- if (builtin_cmdline[0]) {
- /* append boot loader cmdline to builtin */
- strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
- strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
- }
-#endif
-#endif
-
+ cmdline_add_builtin(boot_command_line, NULL, COMMAND_LINE_SIZE);
strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index f14c4ff5839f..9538c9d4a0bc 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -736,7 +736,7 @@ unsigned long efi_main(efi_handle_t handle,
}
#ifdef CONFIG_CMDLINE_BOOL
- status = efi_parse_options(CONFIG_CMDLINE);
+ status = efi_parse_options(CONFIG_CMDLINE_PREPEND " " CONFIG_CMDLINE_APPEND);
if (status != EFI_SUCCESS) {
efi_err("Failed to parse options\n");
goto fail;
--
2.25.1
Powered by blists - more mailing lists