Message-ID: <b52d38d6-17bc-b3a7-5706-6fe7bf7ebb7c@micronovasrl.com>
Date:   Fri, 5 Mar 2021 20:31:33 +0100
From:   Giulio Benetti <giulio.benetti@...ronovasrl.com>
To:     Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Giulio Benetti <giulio.benetti@...ettiengineering.com>
Cc:     Henrik Rydberg <rydberg@...math.org>, linux-kernel@...r.kernel.org,
        linux-input@...r.kernel.org
Subject: Re: [PATCH 3/3] Input: add driver for the Hycon HY46XX touchpanel
 series

Hi Dmitry,

Il 05/03/2021 20:00, Dmitry Torokhov ha scritto:
> Hi Giulio,
> 
> On Fri, Mar 05, 2021 at 05:38:34PM +0100, Giulio Benetti wrote:
>> From: Giulio Benetti <giulio.benetti@...ronovasrl.com>
>>
>> This patch adds support for Hycon HY46XX.
> 
> Could you please tell me where patches 1/3 and 2/3. I am guessing they
> are dealing with DT bindings and are most likely to go through my tree
> after Rob's ACK.

Sorry, this was a buggy script I've used to list contacts and git 
send-email.
I'm going to add you +Cc.
Going to answer below soon.

Thank you
Best regards
-- 
Giulio Benetti
CTO

MICRONOVA SRL
Sede: Via A. Niedda 3 - 35010 Vigonza (PD)
Tel. 049/8931563 - Fax 049/8931346
Cod.Fiscale - P.IVA 02663420285
Capitale Sociale € 26.000 i.v.
Iscritta al Reg. Imprese di Padova N. 02663420285
Numero R.E.A. 258642

>>
>> Signed-off-by: Giulio Benetti <giulio.benetti@...ronovasrl.com>
>> ---
>>   MAINTAINERS                              |   1 +
>>   drivers/input/touchscreen/Kconfig        |  12 +
>>   drivers/input/touchscreen/Makefile       |   1 +
>>   drivers/input/touchscreen/hycon-hy46xx.c | 571 +++++++++++++++++++++++
>>   4 files changed, 585 insertions(+)
>>   create mode 100644 drivers/input/touchscreen/hycon-hy46xx.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 3f83daf6b2bf..7a1331657e4b 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -8250,6 +8250,7 @@ M:	Giulio Benetti <giulio.benetti@...ronovasrl.com>
>>   L:	linux-input@...r.kernel.org
>>   S:	Maintained
>>   F:	Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml
>> +F:	drivers/input/touchscreen/hy46xx.c
>>   
>>   HYGON PROCESSOR SUPPORT
>>   M:	Pu Wen <puwen@...on.cn>
>> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
>> index 529614d364fe..5d4751d901cb 100644
>> --- a/drivers/input/touchscreen/Kconfig
>> +++ b/drivers/input/touchscreen/Kconfig
>> @@ -1335,4 +1335,16 @@ config TOUCHSCREEN_ZINITIX
>>   	  To compile this driver as a module, choose M here: the
>>   	  module will be called zinitix.
>>   
>> +config TOUCHSCREEN_HYCON_HY46XX
>> +	tristate "Hycon hy46xx touchscreen support"
>> +	depends on I2C
>> +	help
>> +	  Say Y here if you have a touchscreen using Hycon hy46xx,
>> +	  or something similar enough.
>> +
>> +	  If unsure, say N.
>> +
>> +	  To compile this driver as a module, choose M here: the
>> +	  module will be called hycon-hy46xx.
>> +
>>   endif
>> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
>> index 6233541e9173..8b68cf3a3e6d 100644
>> --- a/drivers/input/touchscreen/Makefile
>> +++ b/drivers/input/touchscreen/Makefile
>> @@ -112,3 +112,4 @@ obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023)	+= rohm_bu21023.o
>>   obj-$(CONFIG_TOUCHSCREEN_RASPBERRYPI_FW)	+= raspberrypi-ts.o
>>   obj-$(CONFIG_TOUCHSCREEN_IQS5XX)	+= iqs5xx.o
>>   obj-$(CONFIG_TOUCHSCREEN_ZINITIX)	+= zinitix.o
>> +obj-$(CONFIG_TOUCHSCREEN_HYCON_HY46XX)	+= hycon-hy46xx.o
>> diff --git a/drivers/input/touchscreen/hycon-hy46xx.c b/drivers/input/touchscreen/hycon-hy46xx.c
>> new file mode 100644
>> index 000000000000..ef0dee9a43a9
>> --- /dev/null
>> +++ b/drivers/input/touchscreen/hycon-hy46xx.c
>> @@ -0,0 +1,571 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (C) 2021
>> + * Author(s): Giulio Benetti <giulio.benetti@...ronovasrl.com>
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/i2c.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/input.h>
>> +#include <linux/input/mt.h>
>> +#include <linux/input/touchscreen.h>
>> +#include <linux/irq.h>
>> +#include <linux/regulator/consumer.h>
>> +
>> +#include <asm/unaligned.h>
>> +
>> +#define HY46XX_CHKSUM_CODE		0x1
>> +#define HY46XX_FINGER_NUM		0x2
>> +#define HY46XX_CHKSUM_LEN		0x7
>> +#define HY46XX_THRESHOLD		0x80
>> +#define HY46XX_PROX_SENS_SW		0x81
>> +#define HY46XX_GLOVE_EN			0x84
>> +#define HY46XX_REPORT_SPEED		0x88
>> +#define HY46XX_PWR_NOISE_EN		0x89
>> +#define HY46XX_FILTER_DATA		0x8A
>> +#define HY46XX_GAIN			0x92
>> +#define HY46XX_EDGE_OFFSET		0x93
>> +#define HY46XX_RX_NR_USED		0x94
>> +#define HY46XX_TX_NR_USED		0x95
>> +#define HY46XX_PWR_MODE			0xA5
>> +#define HY46XX_FW_VERSION		0xA6
>> +#define HY46XX_LIB_VERSION		0xA7
>> +#define HY46XX_TP_INFO			0xA8
>> +#define HY46XX_TP_CHIP_ID		0xA9
>> +#define HY46XX_BOOT_VER			0xB0
>> +
>> +#define HY46XX_TPLEN			0x6
>> +
>> +#define HY46XX_MAX_SUPPORTED_POINTS	11
>> +
>> +#define TOUCH_EVENT_DOWN		0x00
>> +#define TOUCH_EVENT_UP			0x01
>> +#define TOUCH_EVENT_CONTACT		0x02
>> +#define TOUCH_EVENT_RESERVED		0x03
>> +
>> +struct hycon_hy46xx_data {
>> +	struct i2c_client *client;
>> +	struct input_dev *input;
>> +	struct touchscreen_properties prop;
>> +	struct regulator *vcc;
>> +
>> +	struct gpio_desc *reset_gpio;
>> +
>> +	struct mutex mutex;
>> +
>> +	int threshold;
>> +	int proximity_sensor_switch;
>> +	int glove_enable;
>> +	int report_speed;
>> +	int power_noise_enable;
>> +	int filter_data;
>> +	int gain;
>> +	int edge_offset;
>> +	int rx_number_used;
>> +	int tx_number_used;
>> +	int power_mode;
>> +	int fw_version;
>> +	int lib_version;
>> +	int tp_information;
>> +	int tp_chip_id;
>> +	int bootloader_version;
>> +};
>> +
>> +static int hycon_hy46xx_readwrite(struct i2c_client *client, u16 wr_len, u8 *wr_buf,
>> +			    u16 rd_len, u8 *rd_buf)
>> +{
>> +	struct i2c_msg msgs[2];
>> +	int i = 0;
>> +	int ret;
>> +
>> +	if (wr_len) {
>> +		msgs[i].addr  = client->addr;
>> +		msgs[i].flags = 0;
>> +		msgs[i].len = wr_len;
>> +		msgs[i].buf = wr_buf;
>> +		i++;
>> +	}
>> +	if (rd_len) {
>> +		msgs[i].addr  = client->addr;
>> +		msgs[i].flags = I2C_M_RD;
>> +		msgs[i].len = rd_len;
>> +		msgs[i].buf = rd_buf;
>> +		i++;
>> +	}
>> +
>> +	ret = i2c_transfer(client->adapter, msgs, i);
>> +	if (ret < 0)
>> +		return ret;
>> +	if (ret != i)
>> +		return -EIO;
>> +
>> +	return 0;
>> +}
> 
> Please see if your driver could be converted to regmap API instead of
> "maked" i2c. It will allow using write-gather when system supports it,
> etc.
> 
>> +
>> +static bool hycon_hy46xx_check_checksum(struct hycon_hy46xx_data *tsdata, u8 *buf)
>> +{
>> +	u8 chksum = 0;
>> +	int i;
>> +
>> +	for (i = 2; i < buf[HY46XX_CHKSUM_LEN]; i++)
>> +		chksum += buf[i];
>> +
>> +	if (chksum == buf[HY46XX_CHKSUM_CODE])
>> +		return true;
>> +
>> +	dev_err_ratelimited(&tsdata->client->dev,
>> +			    "checksum error: 0x%02x expected, got 0x%02x\n",
>> +			    chksum, buf[HY46XX_CHKSUM_CODE]);
>> +
>> +	return false;
>> +}
>> +
>> +static irqreturn_t hycon_hy46xx_isr(int irq, void *dev_id)
>> +{
>> +	struct hycon_hy46xx_data *tsdata = dev_id;
>> +	struct device *dev = &tsdata->client->dev;
>> +	u8 rdbuf[0x44];
> A #define here would be nice.
> A #define here would be nice.
> 
>> +	u8 cmd;
>> +	int i, x, y, id;
>> +	int error;
>> +
>> +	memset(rdbuf, 0, sizeof(rdbuf));
>> +
>> +	error = hycon_hy46xx_readwrite(tsdata->client, 1, &cmd, sizeof(rdbuf), rdbuf);
> 
> cmd could be any garbage (as it is uninitialized)? This requires a nice
> comment as to why it is OK.
> 
>> +	if (error) {
>> +		dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n",
>> +				    error);
>> +		goto out;
>> +	}
>> +
>> +	if (!hycon_hy46xx_check_checksum(tsdata, rdbuf))
>> +		goto out;
>> +
>> +	for (i = 0; i < HY46XX_MAX_SUPPORTED_POINTS; i++) {
>> +		u8 *buf = &rdbuf[3 + (HY46XX_TPLEN * i)];
>> +		int type = buf[0] >> 6;
>> +
>> +		if (type == TOUCH_EVENT_RESERVED)
>> +			continue;
>> +
>> +		x = get_unaligned_be16(buf) & 0x0fff;
>> +		y = get_unaligned_be16(buf + 2) & 0x0fff;
>> +
>> +		id = (buf[2] >> 4) & 0x0f;
> 
> buf is u8 so no need to additionally mask after shifting.
> 
>> +
>> +		input_mt_slot(tsdata->input, id);
>> +		if (input_mt_report_slot_state(tsdata->input, MT_TOOL_FINGER,
>> +					       type != TOUCH_EVENT_UP))
>> +			touchscreen_report_pos(tsdata->input, &tsdata->prop,
>> +					       x, y, true);
>> +	}
>> +
>> +	input_mt_report_pointer_emulation(tsdata->input, true);
>> +	input_sync(tsdata->input);
>> +
>> +out:
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static int hycon_hy46xx_register_write(struct hycon_hy46xx_data *tsdata, u8 addr, u8 value)
>> +{
>> +	u8 wrbuf[2];
>> +
>> +	wrbuf[0] = addr;
>> +	wrbuf[1] = value;
>> +
>> +	return hycon_hy46xx_readwrite(tsdata->client, 2, wrbuf, 0, NULL);
>> +}
>> +
>> +static int hycon_hy46xx_register_read(struct hycon_hy46xx_data *tsdata, u8 addr)
>> +{
>> +	u8 wrbyte, rdbyte;
>> +	int error;
>> +
>> +	wrbyte = addr;
>> +	error = hycon_hy46xx_readwrite(tsdata->client, 1, &wrbyte, 1, &rdbyte);
>> +	if (error)
>> +		return error;
>> +
>> +	return rdbyte;
>> +}
>> +
>> +struct hycon_hy46xx_attribute {
>> +	struct device_attribute dattr;
>> +	size_t field_offset;
>> +	u8 address;
>> +	u8 limit_low;
>> +	u8 limit_high;
>> +};
>> +
>> +#define HYCON_ATTR(_field, _mode, _address, _limit_low, _limit_high)	\
>> +	struct hycon_hy46xx_attribute hycon_hy46xx_attr_##_field = {		\
>> +		.dattr = __ATTR(_field, _mode,				\
>> +				hycon_hy46xx_setting_show,			\
>> +				hycon_hy46xx_setting_store),			\
>> +		.field_offset = offsetof(struct hycon_hy46xx_data, _field),	\
>> +		.address = _address,					\
>> +		.limit_low = _limit_low,				\
>> +		.limit_high = _limit_high,				\
>> +	}
>> +
>> +static ssize_t hycon_hy46xx_setting_show(struct device *dev,
>> +				   struct device_attribute *dattr, char *buf)
>> +{
>> +	struct i2c_client *client = to_i2c_client(dev);
>> +	struct hycon_hy46xx_data *tsdata = i2c_get_clientdata(client);
>> +	struct hycon_hy46xx_attribute *attr =
>> +			container_of(dattr, struct hycon_hy46xx_attribute, dattr);
>> +	u8 *field = (u8 *)tsdata + attr->field_offset;
>> +	int val;
>> +	size_t count = 0;
>> +	int error = 0;
>> +	u8 addr = attr->address;
>> +
>> +	mutex_lock(&tsdata->mutex);
>> +
>> +	val = hycon_hy46xx_register_read(tsdata, addr);
>> +	if (val < 0) {
>> +		error = val;
>> +		dev_err(&tsdata->client->dev,
>> +			"Failed to fetch attribute %s, error %d\n",
>> +			dattr->attr.name, error);
>> +		goto out;
>> +	}
>> +
>> +	if (val != *field) {
>> +		dev_warn(&tsdata->client->dev,
>> +			 "%s: read (%d) and stored value (%d) differ\n",
>> +			 dattr->attr.name, val, *field);
>> +		*field = val;
>> +	}
>> +
>> +	count = scnprintf(buf, PAGE_SIZE, "%d\n", val);
>> +out:
>> +	mutex_unlock(&tsdata->mutex);
>> +	return error ?: count;
>> +}
>> +
>> +static ssize_t hycon_hy46xx_setting_store(struct device *dev,
>> +					struct device_attribute *dattr,
>> +					const char *buf, size_t count)
>> +{
>> +	struct i2c_client *client = to_i2c_client(dev);
>> +	struct hycon_hy46xx_data *tsdata = i2c_get_clientdata(client);
>> +	struct hycon_hy46xx_attribute *attr =
>> +			container_of(dattr, struct hycon_hy46xx_attribute, dattr);
>> +	u8 *field = (u8 *)tsdata + attr->field_offset;
>> +	unsigned int val;
>> +	int error;
>> +	u8 addr = attr->address;
>> +
>> +	mutex_lock(&tsdata->mutex);
>> +
>> +	error = kstrtouint(buf, 0, &val);
>> +	if (error)
>> +		goto out;
>> +
>> +	if (val < attr->limit_low || val > attr->limit_high) {
>> +		error = -ERANGE;
>> +		goto out;
>> +	}
>> +
>> +	error = hycon_hy46xx_register_write(tsdata, addr, val);
>> +	if (error) {
>> +		dev_err(&tsdata->client->dev,
>> +			"Failed to update attribute %s, error: %d\n",
>> +			dattr->attr.name, error);
>> +		goto out;
>> +	}
>> +	*field = val;
> 
> I am not sure why you want this check (I see that we have it in one
> other driver and I really do not recall why we have it there either).
> 
>> +
>> +out:
>> +	mutex_unlock(&tsdata->mutex);
>> +	return error ?: count;
>> +}
>> +
>> +static HYCON_ATTR(threshold, 0644, HY46XX_THRESHOLD, 0, 255);
>> +static HYCON_ATTR(proximity_sensor_switch, 0644,  HY46XX_PROX_SENS_SW, 0, 1);
>> +static HYCON_ATTR(glove_enable, 0644, HY46XX_GLOVE_EN, 0, 1);
>> +static HYCON_ATTR(report_speed, 0644, HY46XX_REPORT_SPEED, 0, 255);
>> +static HYCON_ATTR(power_noise_enable, 0644, HY46XX_PWR_NOISE_EN, 0, 1);
>> +static HYCON_ATTR(filter_data, 0644, HY46XX_FILTER_DATA, 0, 5);
>> +static HYCON_ATTR(gain, 0644, HY46XX_GAIN, 0, 5);
>> +static HYCON_ATTR(edge_offset, 0644, HY46XX_EDGE_OFFSET, 0, 5);
>> +static HYCON_ATTR(fw_version, 0444, HY46XX_FW_VERSION, 0, 255);
>> +static HYCON_ATTR(lib_version, 0444, HY46XX_LIB_VERSION, 0, 255);
>> +static HYCON_ATTR(tp_information, 0444, HY46XX_TP_INFO, 0, 255);
>> +static HYCON_ATTR(tp_chip_id, 0444, HY46XX_TP_CHIP_ID, 0, 255);
>> +static HYCON_ATTR(bootloader_version, 0444, HY46XX_BOOT_VER, 0, 255);
>> +
>> +static struct attribute *hycon_hy46xx_attrs[] = {
>> +	&hycon_hy46xx_attr_threshold.dattr.attr,
>> +	&hycon_hy46xx_attr_proximity_sensor_switch.dattr.attr,
>> +	&hycon_hy46xx_attr_glove_enable.dattr.attr,
>> +	&hycon_hy46xx_attr_report_speed.dattr.attr,
>> +	&hycon_hy46xx_attr_power_noise_enable.dattr.attr,
>> +	&hycon_hy46xx_attr_filter_data.dattr.attr,
>> +	&hycon_hy46xx_attr_gain.dattr.attr,
>> +	&hycon_hy46xx_attr_edge_offset.dattr.attr,
>> +	&hycon_hy46xx_attr_fw_version.dattr.attr,
>> +	&hycon_hy46xx_attr_lib_version.dattr.attr,
>> +	&hycon_hy46xx_attr_tp_information.dattr.attr,
>> +	&hycon_hy46xx_attr_tp_chip_id.dattr.attr,
>> +	&hycon_hy46xx_attr_bootloader_version.dattr.attr,
>> +	NULL
>> +};
>> +
>> +static const struct attribute_group hycon_hy46xx_attr_group = {
>> +	.attrs = hycon_hy46xx_attrs,
>> +};
>> +
>> +static void hycon_hy46xx_get_defaults(struct device *dev, struct hycon_hy46xx_data *tsdata)
>> +{
>> +	u32 val;
>> +	int error;
>> +
>> +	error = device_property_read_u32(dev, "threshold", &val);
>> +	if (!error) {
>> +		hycon_hy46xx_register_write(tsdata, HY46XX_THRESHOLD, val);
>> +		tsdata->threshold = val;
>> +	}
>> +
>> +	error = device_property_read_u32(dev, "proximity-sensor-switch", &val);
>> +	if (!error) {
>> +		hycon_hy46xx_register_write(tsdata, HY46XX_PROX_SENS_SW, val);
>> +		tsdata->proximity_sensor_switch = val;
>> +	}
>> +
>> +	error = device_property_read_u32(dev, "glove-enable", &val);
>> +	if (!error) {
>> +		hycon_hy46xx_register_write(tsdata, HY46XX_GLOVE_EN, val);
>> +		tsdata->glove_enable = val;
>> +	}
>> +
>> +	error = device_property_read_u32(dev, "report-speed", &val);
>> +	if (!error) {
>> +		hycon_hy46xx_register_write(tsdata, HY46XX_REPORT_SPEED, val);
>> +		tsdata->report_speed = val;
>> +	}
>> +
>> +	error = device_property_read_u32(dev, "power-noise-enable", &val);
>> +	if (!error) {
>> +		hycon_hy46xx_register_write(tsdata, HY46XX_PWR_NOISE_EN, val);
>> +		tsdata->report_speed = val;
>> +	}
>> +
>> +	error = device_property_read_u32(dev, "filter-data", &val);
>> +	if (!error) {
>> +		hycon_hy46xx_register_write(tsdata, HY46XX_FILTER_DATA, val);
>> +		tsdata->report_speed = val;
>> +	}
>> +
>> +	error = device_property_read_u32(dev, "gain", &val);
>> +	if (!error) {
>> +		hycon_hy46xx_register_write(tsdata, HY46XX_GAIN, val);
>> +		tsdata->report_speed = val;
>> +	}
>> +
>> +	error = device_property_read_u32(dev, "edge-offset", &val);
>> +	if (!error) {
>> +		hycon_hy46xx_register_write(tsdata, HY46XX_EDGE_OFFSET, val);
>> +		tsdata->report_speed = val;
>> +	}
>> +}
>> +
>> +static void hycon_hy46xx_get_parameters(struct hycon_hy46xx_data *tsdata)
>> +{
>> +	tsdata->threshold = hycon_hy46xx_register_read(tsdata, HY46XX_THRESHOLD);
>> +	tsdata->proximity_sensor_switch =
>> +		hycon_hy46xx_register_read(tsdata, HY46XX_PROX_SENS_SW);
>> +	tsdata->glove_enable = hycon_hy46xx_register_read(tsdata, HY46XX_GLOVE_EN);
>> +	tsdata->report_speed =
>> +		hycon_hy46xx_register_read(tsdata, HY46XX_REPORT_SPEED);
>> +	tsdata->power_noise_enable =
>> +		hycon_hy46xx_register_read(tsdata, HY46XX_PWR_NOISE_EN);
>> +	tsdata->filter_data = hycon_hy46xx_register_read(tsdata, HY46XX_FILTER_DATA);
>> +	tsdata->gain = hycon_hy46xx_register_read(tsdata, HY46XX_GAIN);
>> +	tsdata->edge_offset = hycon_hy46xx_register_read(tsdata, HY46XX_EDGE_OFFSET);
>> +	tsdata->rx_number_used =
>> +		hycon_hy46xx_register_read(tsdata, HY46XX_RX_NR_USED);
>> +	tsdata->tx_number_used =
>> +		hycon_hy46xx_register_read(tsdata, HY46XX_TX_NR_USED);
>> +	tsdata->power_mode = hycon_hy46xx_register_read(tsdata, HY46XX_PWR_MODE);
>> +	tsdata->fw_version = hycon_hy46xx_register_read(tsdata, HY46XX_FW_VERSION);
>> +	tsdata->lib_version = hycon_hy46xx_register_read(tsdata, HY46XX_LIB_VERSION);
>> +	tsdata->tp_information = hycon_hy46xx_register_read(tsdata, HY46XX_TP_INFO);
>> +	tsdata->tp_chip_id = hycon_hy46xx_register_read(tsdata, HY46XX_TP_CHIP_ID);
>> +	tsdata->bootloader_version =
>> +		hycon_hy46xx_register_read(tsdata, HY46XX_BOOT_VER);
>> +}
>> +
>> +static void hycon_hy46xx_disable_regulator(void *arg)
>> +{
>> +	struct hycon_hy46xx_data *data = arg;
>> +
>> +	regulator_disable(data->vcc);
>> +}
>> +
>> +static int hycon_hy46xx_probe(struct i2c_client *client,
>> +					 const struct i2c_device_id *id)
>> +{
>> +	const struct hycon_hy46xx_i2c_chip_data *chip_data;
> 
> Where is this defined??
> 
>> +	struct hycon_hy46xx_data *tsdata;
>> +	struct input_dev *input;
>> +	unsigned long irq_flags;
>> +	int error;
>> +
>> +	dev_dbg(&client->dev, "probing for HYCON HY46XX I2C\n");
>> +
>> +	tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL);
>> +	if (!tsdata)
>> +		return -ENOMEM;
>> +
>> +	chip_data = device_get_match_data(&client->dev);
>> +	if (!chip_data)
>> +		chip_data = (const struct hycon_hy46xx_i2c_chip_data *)
>> +			     id->driver_data;
>> +	if (!chip_data) {
>> +		dev_err(&client->dev, "invalid or missing chip data\n");
>> +		return -EINVAL;
>> +	}
> 
> You are not attaching any additional data to OF or legacy match tables,
> so why are you doing this?
> 
>> +
>> +	tsdata->vcc = devm_regulator_get(&client->dev, "vcc");
>> +	if (IS_ERR(tsdata->vcc)) {
>> +		error = PTR_ERR(tsdata->vcc);
>> +		if (error != -EPROBE_DEFER)
>> +			dev_err(&client->dev,
>> +				"failed to request regulator: %d\n", error);
>> +		return error;
>> +	}
>> +
>> +	error = regulator_enable(tsdata->vcc);
>> +	if (error < 0) {
>> +		dev_err(&client->dev, "failed to enable vcc: %d\n", error);
>> +		return error;
>> +	}
>> +
>> +	error = devm_add_action_or_reset(&client->dev,
>> +					 hycon_hy46xx_disable_regulator,
>> +					 tsdata);
>> +	if (error)
>> +		return error;
>> +
>> +	tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev,
>> +						     "reset", GPIOD_OUT_LOW);
>> +	if (IS_ERR(tsdata->reset_gpio)) {
>> +		error = PTR_ERR(tsdata->reset_gpio);
>> +		dev_err(&client->dev,
>> +			"Failed to request GPIO reset pin, error %d\n", error);
>> +		return error;
>> +	}
>> +
>> +	if (tsdata->reset_gpio) {
>> +		usleep_range(5000, 6000);
>> +		gpiod_set_value_cansleep(tsdata->reset_gpio, 1);
>> +		usleep_range(5000, 6000);
>> +		gpiod_set_value_cansleep(tsdata->reset_gpio, 0);
>> +		msleep(1000);
>> +	}
>> +
>> +	input = devm_input_allocate_device(&client->dev);
>> +	if (!input) {
>> +		dev_err(&client->dev, "failed to allocate input device.\n");
>> +		return -ENOMEM;
>> +	}
>> +
>> +	mutex_init(&tsdata->mutex);
>> +	tsdata->client = client;
>> +	tsdata->input = input;
>> +
>> +	hycon_hy46xx_get_defaults(&client->dev, tsdata);
>> +	hycon_hy46xx_get_parameters(tsdata);
>> +
>> +	input->name = "Hycon Capacitive Touch";
>> +	input->id.bustype = BUS_I2C;
>> +	input->dev.parent = &client->dev;
>> +
>> +	input_set_abs_params(input, ABS_MT_POSITION_X,
>> +			     0, -1, 0, 0);
>> +	input_set_abs_params(input, ABS_MT_POSITION_Y,
>> +			     0, -1, 0, 0);
>> +
>> +	touchscreen_parse_properties(input, true, &tsdata->prop);
>> +
>> +	error = input_mt_init_slots(input, HY46XX_MAX_SUPPORTED_POINTS,
>> +				INPUT_MT_DIRECT);
>> +	if (error) {
>> +		dev_err(&client->dev, "Unable to init MT slots.\n");
>> +		return error;
>> +	}
>> +
>> +	i2c_set_clientdata(client, tsdata);
>> +
>> +	irq_flags = irq_get_trigger_type(client->irq);
>> +	if (irq_flags == IRQF_TRIGGER_NONE)
>> +		irq_flags = IRQF_TRIGGER_FALLING;
>> +	irq_flags |= IRQF_ONESHOT;
> 
> Just use IRQF_ONESHOT. The construct above is for compatibility when we
> had drivers in the tree that were hard-coding trigger, and then we moved
> to specify trigger in platform code/ACPI/DT and wanted to limit
> regressions. Given this driver is brand new simply pass IRQF_ONESHOT
> into devm_request_threaded_irq() below and call it a day.
> 
>> +
>> +	error = devm_request_threaded_irq(&client->dev, client->irq,
>> +					NULL, hycon_hy46xx_isr, irq_flags,
>> +					client->name, tsdata);
>> +	if (error) {
>> +		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
>> +		return error;
>> +	}
>> +
>> +	error = devm_device_add_group(&client->dev, &hycon_hy46xx_attr_group);
>> +	if (error)
>> +		return error;
>> +
>> +	error = input_register_device(input);
>> +	if (error)
>> +		return error;
>> +
>> +	dev_dbg(&client->dev,
>> +		"HYCON HY46XX initialized: IRQ %d, Reset pin %d.\n",
>> +		client->irq,
>> +		tsdata->reset_gpio ? desc_to_gpio(tsdata->reset_gpio) : -1);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct i2c_device_id hycon_hy46xx_id[] = {
>> +	{ .name = "hycon-hy4613" },
>> +	{ .name = "hycon-hy4614" },
>> +	{ .name = "hycon-hy4621" },
>> +	{ .name = "hycon-hy4623" },
>> +	{ .name = "hycon-hy4633" },
>> +	{ .name = "hycon-hy4635" },
>> +	{ /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, hycon_hy46xx_id);
>> +
>> +static const struct of_device_id hycon_hy46xx_of_match[] = {
>> +	{ .compatible = "hycon,hycon-hy4613" },
>> +	{ .compatible = "hycon,hycon-hy4614" },
>> +	{ .compatible = "hycon,hycon-hy4621" },
>> +	{ .compatible = "hycon,hycon-hy4623" },
>> +	{ .compatible = "hycon,hycon-hy4633" },
>> +	{ .compatible = "hycon,hycon-hy4635" },
>> +	{ /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, hycon_hy46xx_of_match);
>> +
>> +static struct i2c_driver hycon_hy46xx_driver = {
>> +	.driver = {
>> +		.name = "hycon_hy46xx",
>> +		.of_match_table = hycon_hy46xx_of_match,
>> +		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
>> +	},
>> +	.id_table = hycon_hy46xx_id,
>> +	.probe    = hycon_hy46xx_probe,
>> +};
>> +
>> +module_i2c_driver(hycon_hy46xx_driver);
>> +
>> +MODULE_AUTHOR("Giulio Benetti <giulio.benetti@...ronovasrl.com>");
>> +MODULE_DESCRIPTION("HYCON HY46XX I2C Touchscreen Driver");
>> +MODULE_LICENSE("GPL v2");
>> -- 
>> 2.25.1
>>
> 
> Thanks.
> 

Powered by blists - more mailing lists