| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210306155712.4298-4-noltari@gmail.com>
Date: Sat, 6 Mar 2021 16:57:00 +0100
From: Álvaro Fernández Rojas
<noltari@...il.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Michael Walle <michael@...le.cc>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Florian Fainelli <f.fainelli@...il.com>,
bcm-kernel-feedback-list@...adcom.com,
Jonas Gorski <jonas.gorski@...il.com>,
Álvaro Fernández Rojas
<noltari@...il.com>,
Necip Fazil Yildiran <fazilyildiran@...il.com>,
Andy Shevchenko <andy.shevchenko@...il.com>,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v5 03/15] pinctrl: bcm: add bcm63xx base code
Add a helper for registering BCM63XX pin controllers.
Signed-off-by: Jonas Gorski <jonas.gorski@...il.com>
Co-developed-by: Jonas Gorski <jonas.gorski@...il.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@...il.com>
---
v5: add changes suggested by Andy Shevchenko
v4: drop IRQ selects from Kconfig and add missing of_node_put()
v3: add new patch with shared code
drivers/pinctrl/bcm/Kconfig | 7 ++
drivers/pinctrl/bcm/Makefile | 1 +
drivers/pinctrl/bcm/pinctrl-bcm63xx.c | 112 ++++++++++++++++++++++++++
drivers/pinctrl/bcm/pinctrl-bcm63xx.h | 43 ++++++++++
4 files changed, 163 insertions(+)
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.c
create mode 100644 drivers/pinctrl/bcm/pinctrl-bcm63xx.h
diff --git a/drivers/pinctrl/bcm/Kconfig b/drivers/pinctrl/bcm/Kconfig
index 0ed14de0134c..882f19bdc243 100644
--- a/drivers/pinctrl/bcm/Kconfig
+++ b/drivers/pinctrl/bcm/Kconfig
@@ -29,6 +29,13 @@ config PINCTRL_BCM2835
help
Say Y here to enable the Broadcom BCM2835 GPIO driver.
+config PINCTRL_BCM63XX
+ bool
+ select GENERIC_PINCONF
+ select GPIO_REGMAP
+ select PINCONF
+ select PINMUX
+
config PINCTRL_IPROC_GPIO
bool "Broadcom iProc GPIO (with PINCONF) driver"
depends on OF_GPIO && (ARCH_BCM_IPROC || COMPILE_TEST)
diff --git a/drivers/pinctrl/bcm/Makefile b/drivers/pinctrl/bcm/Makefile
index 79d5e49fdd9a..0e3cf9b15c65 100644
--- a/drivers/pinctrl/bcm/Makefile
+++ b/drivers/pinctrl/bcm/Makefile
@@ -3,6 +3,7 @@
obj-$(CONFIG_PINCTRL_BCM281XX) += pinctrl-bcm281xx.o
obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o
+obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
obj-$(CONFIG_PINCTRL_IPROC_GPIO) += pinctrl-iproc-gpio.o
obj-$(CONFIG_PINCTRL_CYGNUS_MUX) += pinctrl-cygnus-mux.o
obj-$(CONFIG_PINCTRL_NS) += pinctrl-ns.o
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63xx.c b/drivers/pinctrl/bcm/pinctrl-bcm63xx.c
new file mode 100644
index 000000000000..0a8906e4261b
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for BCM63xx GPIO unit (pinctrl + GPIO)
+ *
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@...il.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@...il.com>
+ */
+
+#include <linux/gpio/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "pinctrl-bcm63xx.h"
+
+#define BCM63XX_BANK_SIZE 4
+
+#define BCM63XX_DIROUT_REG 0x04
+#define BCM63XX_DATA_REG 0x0c
+
+static int bcm63xx_reg_mask_xlate(struct gpio_regmap *gpio,
+ unsigned int base, unsigned int offset,
+ unsigned int *reg, unsigned int *mask)
+{
+ unsigned int line = offset % BCM63XX_BANK_GPIOS;
+ unsigned int stride = offset / BCM63XX_BANK_GPIOS;
+
+ *reg = base - stride * BCM63XX_BANK_SIZE;
+ *mask = BIT(line);
+
+ return 0;
+}
+
+static const struct of_device_id bcm63xx_gpio_of_match[] = {
+ { .compatible = "brcm,bcm6318-gpio", },
+ { .compatible = "brcm,bcm6328-gpio", },
+ { .compatible = "brcm,bcm6358-gpio", },
+ { .compatible = "brcm,bcm6362-gpio", },
+ { .compatible = "brcm,bcm6368-gpio", },
+ { .compatible = "brcm,bcm63268-gpio", },
+ { /* sentinel */ }
+};
+
+static int bcm63xx_gpio_probe(struct device *dev, struct device_node *node,
+ const struct bcm63xx_pinctrl_soc *soc,
+ struct bcm63xx_pinctrl *pc)
+{
+ struct gpio_regmap_config grc = {0};
+
+ grc.parent = dev;
+ grc.fwnode = &node->fwnode;
+ grc.ngpio = soc->ngpios;
+ grc.ngpio_per_reg = BCM63XX_BANK_GPIOS;
+ grc.regmap = pc->regs;
+ grc.reg_mask_xlate = bcm63xx_reg_mask_xlate;
+
+ if (of_property_read_u32(node, "data", &grc.reg_dat_base))
+ grc.reg_dat_base = BCM63XX_DATA_REG;
+ grc.reg_set_base = grc.reg_dat_base;
+
+ if (of_property_read_u32(node, "dirout", &grc.reg_dir_out_base))
+ grc.reg_dir_out_base = BCM63XX_DIROUT_REG;
+
+ return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &grc));
+}
+
+int bcm63xx_pinctrl_probe(struct platform_device *pdev,
+ const struct bcm63xx_pinctrl_soc *soc,
+ void *driver_data)
+{
+ struct device *dev = &pdev->dev;
+ struct bcm63xx_pinctrl *pc;
+ struct device_node *node;
+ int err;
+
+ pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL);
+ if (!pc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, pc);
+
+ pc->dev = dev;
+ pc->driver_data = driver_data;
+
+ pc->regs = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(pc->regs))
+ return PTR_ERR(pc->regs);
+
+ pc->pctl_desc.name = dev_name(dev);
+ pc->pctl_desc.pins = soc->pins;
+ pc->pctl_desc.npins = soc->npins;
+ pc->pctl_desc.pctlops = soc->pctl_ops;
+ pc->pctl_desc.pmxops = soc->pmx_ops;
+ pc->pctl_desc.owner = THIS_MODULE;
+
+ pc->pctl_dev = devm_pinctrl_register(dev, &pc->pctl_desc, pc);
+ if (IS_ERR(pc->pctl_dev))
+ return PTR_ERR(pc->pctl_dev);
+
+ for_each_child_of_node(dev->of_node, node) {
+ if (of_match_node(bcm63xx_gpio_of_match, node)) {
+ err = bcm63xx_gpio_probe(dev, node, soc, pc);
+ if (err) {
+ dev_err(dev, "could not add GPIO chip\n");
+ of_node_put(node);
+ return err;
+ }
+ }
+ }
+
+ return 0;
+}
diff --git a/drivers/pinctrl/bcm/pinctrl-bcm63xx.h b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
new file mode 100644
index 000000000000..3bdb50021f1b
--- /dev/null
+++ b/drivers/pinctrl/bcm/pinctrl-bcm63xx.h
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2021 Álvaro Fernández Rojas <noltari@...il.com>
+ * Copyright (C) 2016 Jonas Gorski <jonas.gorski@...il.com>
+ */
+
+#ifndef __PINCTRL_BCM63XX_H__
+#define __PINCTRL_BCM63XX_H__
+
+#include <linux/pinctrl/pinctrl.h>
+
+#define BCM63XX_BANK_GPIOS 32
+
+struct bcm63xx_pinctrl_soc {
+ struct pinctrl_ops *pctl_ops;
+ struct pinmux_ops *pmx_ops;
+
+ const struct pinctrl_pin_desc *pins;
+ unsigned npins;
+
+ unsigned int ngpios;
+};
+
+struct bcm63xx_pinctrl {
+ struct device *dev;
+ struct regmap *regs;
+
+ struct pinctrl_desc pctl_desc;
+ struct pinctrl_dev *pctl_dev;
+
+ void *driver_data;
+};
+
+static inline unsigned int bcm63xx_bank_pin(unsigned int pin)
+{
+ return pin % BCM63XX_BANK_GPIOS;
+}
+
+int bcm63xx_pinctrl_probe(struct platform_device *pdev,
+ const struct bcm63xx_pinctrl_soc *soc,
+ void *driver_data);
+
+#endif /* __PINCTRL_BCM63XX_H__ */
--
2.20.1
Powered by blists - more mailing lists