| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210306170134.703f63e0@archlinux>
Date: Sat, 6 Mar 2021 17:01:34 +0000
From: Jonathan Cameron <jic23@...nel.org>
To: Sean Nyekjaer <sean@...nix.com>
Cc: Lars-Peter Clausen <lars@...afoo.de>,
Peter Meerwald-Stadler <pmeerw@...erw.net>,
linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] iio: accel: mma8452: convert to regmap
On Wed, 3 Mar 2021 13:47:24 +0100
Sean Nyekjaer <sean@...nix.com> wrote:
> It will be easier to configure various device registers.
What do you mean by this? I'm not against regmap, but I think
a stronger rational for the change is needed.
A few specific comments inline, but nothing major.
Jonathan
>
> No functional change.
>
> Signed-off-by: Sean Nyekjaer <sean@...nix.com>
> ---
> drivers/iio/accel/mma8452.c | 291 +++++++++++++++++++-----------------
> 1 file changed, 156 insertions(+), 135 deletions(-)
>
> diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
> index 33f0c419d8ff..fc29a6e16428 100644
> --- a/drivers/iio/accel/mma8452.c
> +++ b/drivers/iio/accel/mma8452.c
> @@ -32,6 +32,7 @@
> #include <linux/of_irq.h>
> #include <linux/pm_runtime.h>
> #include <linux/regulator/consumer.h>
> +#include <linux/regmap.h>
>
> #define MMA8452_STATUS 0x00
> #define MMA8452_STATUS_DRDY (BIT(2) | BIT(1) | BIT(0))
> @@ -102,7 +103,8 @@
> #define MMA8452_AUTO_SUSPEND_DELAY_MS 2000
>
> struct mma8452_data {
> - struct i2c_client *client;
> + struct regmap *regmap;
> + struct device *dev;
> struct mutex lock;
> u8 ctrl_reg1;
> u8 data_cfg;
> @@ -163,6 +165,11 @@ static const struct mma8452_event_regs trans_ev_regs = {
> .ev_count = MMA8452_TRANSIENT_COUNT,
> };
>
> +static const struct regmap_config mma8452_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> +};
> +
> /**
> * struct mma_chip_info - chip specific data
> * @chip_id: WHO_AM_I register's value
> @@ -194,13 +201,14 @@ enum {
> static int mma8452_drdy(struct mma8452_data *data)
> {
> int tries = 150;
> + unsigned int reg;
>
> while (tries-- > 0) {
> - int ret = i2c_smbus_read_byte_data(data->client,
> - MMA8452_STATUS);
> + int ret = regmap_read(data->regmap, MMA8452_STATUS, ®);
> if (ret < 0)
> return ret;
> - if ((ret & MMA8452_STATUS_DRDY) == MMA8452_STATUS_DRDY)
> +
> + if ((reg & MMA8452_STATUS_DRDY) == MMA8452_STATUS_DRDY)
> return 0;
>
> if (data->sleep_val <= 20)
> @@ -210,28 +218,28 @@ static int mma8452_drdy(struct mma8452_data *data)
> msleep(20);
> }
>
> - dev_err(&data->client->dev, "data not ready\n");
> + dev_err(data->dev, "data not ready\n");
>
> return -EIO;
> }
>
> -static int mma8452_set_runtime_pm_state(struct i2c_client *client, bool on)
> +static int mma8452_set_runtime_pm_state(struct device *dev, bool on)
> {
> #ifdef CONFIG_PM
> int ret;
>
> if (on) {
> - ret = pm_runtime_get_sync(&client->dev);
> + ret = pm_runtime_get_sync(dev);
> } else {
> - pm_runtime_mark_last_busy(&client->dev);
> - ret = pm_runtime_put_autosuspend(&client->dev);
> + pm_runtime_mark_last_busy(dev);
> + ret = pm_runtime_put_autosuspend(dev);
> }
>
> if (ret < 0) {
> - dev_err(&client->dev,
> + dev_err(dev,
> "failed to change power state to %d\n", on);
> if (on)
> - pm_runtime_put_noidle(&client->dev);
> + pm_runtime_put_noidle(dev);
>
> return ret;
> }
> @@ -247,14 +255,17 @@ static int mma8452_read(struct mma8452_data *data, __be16 buf[3])
> if (ret < 0)
> return ret;
>
> - ret = mma8452_set_runtime_pm_state(data->client, true);
> + ret = mma8452_set_runtime_pm_state(data->dev, true);
> if (ret)
> return ret;
>
> - ret = i2c_smbus_read_i2c_block_data(data->client, MMA8452_OUT_X,
> - 3 * sizeof(__be16), (u8 *)buf);
> + ret = regmap_bulk_read(data->regmap, MMA8452_OUT_X, (u8 *)buf, 3 * sizeof(__be16));
> + if (ret < 0) {
> + dev_err(data->dev, "failed to read axes\n");
> + return ret;
> + }
>
> - ret = mma8452_set_runtime_pm_state(data->client, false);
> + ret = mma8452_set_runtime_pm_state(data->dev, false);
>
> return ret;
> }
> @@ -358,12 +369,12 @@ static const u16 mma8452_os_ratio[4][8] = {
>
> static int mma8452_get_power_mode(struct mma8452_data *data)
> {
> - int reg;
> + int ret;
> + unsigned int reg;
>
> - reg = i2c_smbus_read_byte_data(data->client,
> - MMA8452_CTRL_REG2);
> - if (reg < 0)
> - return reg;
> + ret = regmap_read(data->regmap, MMA8452_CTRL_REG2, ®);
> + if (ret < 0)
> + return ret;
>
> return ((reg & MMA8452_CTRL_REG2_MODS_MASK) >>
> MMA8452_CTRL_REG2_MODS_SHIFT);
> @@ -468,8 +479,9 @@ static int mma8452_get_hp_filter_index(struct mma8452_data *data,
> static int mma8452_read_hp_filter(struct mma8452_data *data, int *hz, int *uHz)
> {
> int j, i, ret;
> + unsigned int reg;
>
> - ret = i2c_smbus_read_byte_data(data->client, MMA8452_HP_FILTER_CUTOFF);
> + ret = regmap_read(data->regmap, MMA8452_HP_FILTER_CUTOFF, ®);
> if (ret < 0)
> return ret;
>
> @@ -479,8 +491,8 @@ static int mma8452_read_hp_filter(struct mma8452_data *data, int *hz, int *uHz)
> return j;
>
> ret &= MMA8452_HP_FILTER_CUTOFF_SEL_MASK;
> - *hz = mma8452_hp_filter_cutoff[j][i][ret][0];
> - *uHz = mma8452_hp_filter_cutoff[j][i][ret][1];
> + *hz = mma8452_hp_filter_cutoff[j][i][reg][0];
> + *uHz = mma8452_hp_filter_cutoff[j][i][reg][1];
>
> return 0;
> }
> @@ -491,6 +503,7 @@ static int mma8452_read_raw(struct iio_dev *indio_dev,
> {
> struct mma8452_data *data = iio_priv(indio_dev);
> __be16 buffer[3];
> + unsigned int reg;
> int i, ret;
>
> switch (mask) {
> @@ -524,13 +537,11 @@ static int mma8452_read_raw(struct iio_dev *indio_dev,
>
> return IIO_VAL_INT_PLUS_MICRO;
> case IIO_CHAN_INFO_CALIBBIAS:
> - ret = i2c_smbus_read_byte_data(data->client,
> - MMA8452_OFF_X +
> - chan->scan_index);
> + ret = regmap_read(data->regmap, MMA8452_OFF_X + chan->scan_index, ®);
> if (ret < 0)
> return ret;
>
> - *val = sign_extend32(ret, 7);
> + *val = sign_extend32(reg, 7);
>
> return IIO_VAL_INT;
> case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
> @@ -572,24 +583,25 @@ static int mma8452_calculate_sleep(struct mma8452_data *data)
>
> static int mma8452_standby(struct mma8452_data *data)
> {
> - return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1,
> - data->ctrl_reg1 & ~MMA8452_CTRL_ACTIVE);
> + return regmap_write(data->regmap, MMA8452_CTRL_REG1,
> + data->ctrl_reg1 & ~MMA8452_CTRL_ACTIVE);
> }
>
> static int mma8452_active(struct mma8452_data *data)
> {
> - return i2c_smbus_write_byte_data(data->client, MMA8452_CTRL_REG1,
> - data->ctrl_reg1);
> + return regmap_write(data->regmap, MMA8452_CTRL_REG1,
> + data->ctrl_reg1);
> }
>
> /* returns >0 if active, 0 if in standby and <0 on error */
> static int mma8452_is_active(struct mma8452_data *data)
> {
> - int reg;
> + unsigned int reg;
> + int ret;
>
> - reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG1);
> - if (reg < 0)
> - return reg;
> + ret = regmap_read(data->regmap, MMA8452_CTRL_REG1, ®);
> + if (ret < 0)
> + return ret;
>
> return reg & MMA8452_CTRL_ACTIVE;
> }
> @@ -614,7 +626,7 @@ static int mma8452_change_config(struct mma8452_data *data, u8 reg, u8 val)
> goto fail;
> }
>
> - ret = i2c_smbus_write_byte_data(data->client, reg, val);
> + ret = regmap_write(data->regmap, reg, val);
> if (ret < 0)
> goto fail;
>
> @@ -633,12 +645,12 @@ static int mma8452_change_config(struct mma8452_data *data, u8 reg, u8 val)
>
> static int mma8452_set_power_mode(struct mma8452_data *data, u8 mode)
> {
> - int reg;
> + int ret;
> + unsigned int reg;
>
> - reg = i2c_smbus_read_byte_data(data->client,
> - MMA8452_CTRL_REG2);
> - if (reg < 0)
> - return reg;
> + ret = regmap_read(data->regmap, MMA8452_CTRL_REG2, ®);
> + if (ret < 0)
> + return ret;
>
> reg &= ~MMA8452_CTRL_REG2_MODS_MASK;
> reg |= mode << MMA8452_CTRL_REG2_MODS_SHIFT;
> @@ -649,55 +661,57 @@ static int mma8452_set_power_mode(struct mma8452_data *data, u8 mode)
> /* returns >0 if in freefall mode, 0 if not or <0 if an error occurred */
> static int mma8452_freefall_mode_enabled(struct mma8452_data *data)
> {
> - int val;
> + int ret;
> + unsigned int reg;
>
> - val = i2c_smbus_read_byte_data(data->client, MMA8452_FF_MT_CFG);
> - if (val < 0)
> - return val;
> + ret = regmap_read(data->regmap, MMA8452_FF_MT_CFG, ®);
> + if (ret < 0)
> + return ret;
>
> - return !(val & MMA8452_FF_MT_CFG_OAE);
> + return !(reg & MMA8452_FF_MT_CFG_OAE);
> }
>
> static int mma8452_set_freefall_mode(struct mma8452_data *data, bool state)
> {
> - int val;
> + int ret;
> + unsigned int reg;
>
> if ((state && mma8452_freefall_mode_enabled(data)) ||
> (!state && !(mma8452_freefall_mode_enabled(data))))
> return 0;
>
> - val = i2c_smbus_read_byte_data(data->client, MMA8452_FF_MT_CFG);
> - if (val < 0)
> - return val;
> + ret = regmap_read(data->regmap, MMA8452_FF_MT_CFG, ®);
> + if (ret < 0)
> + return ret;
>
> if (state) {
> - val |= BIT(idx_x + MMA8452_FF_MT_CHAN_SHIFT);
> - val |= BIT(idx_y + MMA8452_FF_MT_CHAN_SHIFT);
> - val |= BIT(idx_z + MMA8452_FF_MT_CHAN_SHIFT);
> - val &= ~MMA8452_FF_MT_CFG_OAE;
> + reg |= BIT(idx_x + MMA8452_FF_MT_CHAN_SHIFT);
> + reg |= BIT(idx_y + MMA8452_FF_MT_CHAN_SHIFT);
> + reg |= BIT(idx_z + MMA8452_FF_MT_CHAN_SHIFT);
> + reg &= ~MMA8452_FF_MT_CFG_OAE;
> } else {
> - val &= ~BIT(idx_x + MMA8452_FF_MT_CHAN_SHIFT);
> - val &= ~BIT(idx_y + MMA8452_FF_MT_CHAN_SHIFT);
> - val &= ~BIT(idx_z + MMA8452_FF_MT_CHAN_SHIFT);
> - val |= MMA8452_FF_MT_CFG_OAE;
> + reg &= ~BIT(idx_x + MMA8452_FF_MT_CHAN_SHIFT);
> + reg &= ~BIT(idx_y + MMA8452_FF_MT_CHAN_SHIFT);
> + reg &= ~BIT(idx_z + MMA8452_FF_MT_CHAN_SHIFT);
> + reg |= MMA8452_FF_MT_CFG_OAE;
> }
>
> - return mma8452_change_config(data, MMA8452_FF_MT_CFG, val);
> + return mma8452_change_config(data, MMA8452_FF_MT_CFG, reg);
> }
>
> static int mma8452_set_hp_filter_frequency(struct mma8452_data *data,
> int val, int val2)
> {
> - int i, reg;
> + unsigned int reg;
> + int i, ret;
>
> i = mma8452_get_hp_filter_index(data, val, val2);
> if (i < 0)
> return i;
>
> - reg = i2c_smbus_read_byte_data(data->client,
> - MMA8452_HP_FILTER_CUTOFF);
> - if (reg < 0)
> - return reg;
> + ret = regmap_read(data->regmap, MMA8452_HP_FILTER_CUTOFF, ®);
> + if (ret < 0)
> + return ret;
>
> reg &= ~MMA8452_HP_FILTER_CUTOFF_SEL_MASK;
> reg |= i;
> @@ -827,6 +841,7 @@ static int mma8452_read_event_value(struct iio_dev *indio_dev,
> {
> struct mma8452_data *data = iio_priv(indio_dev);
> int ret, us, power_mode;
> + unsigned int reg;
> const struct mma8452_event_regs *ev_regs;
>
> ret = mma8452_get_event_regs(data, chan, dir, &ev_regs);
> @@ -835,16 +850,16 @@ static int mma8452_read_event_value(struct iio_dev *indio_dev,
>
> switch (info) {
> case IIO_EV_INFO_VALUE:
> - ret = i2c_smbus_read_byte_data(data->client, ev_regs->ev_ths);
> + ret = regmap_read(data->regmap, ev_regs->ev_ths, ®);
> if (ret < 0)
> return ret;
>
> - *val = ret & ev_regs->ev_ths_mask;
> + *val = reg & ev_regs->ev_ths_mask;
>
> return IIO_VAL_INT;
>
> case IIO_EV_INFO_PERIOD:
> - ret = i2c_smbus_read_byte_data(data->client, ev_regs->ev_count);
> + ret = regmap_read(data->regmap, ev_regs->ev_count, ®);
> if (ret < 0)
> return ret;
>
> @@ -852,7 +867,7 @@ static int mma8452_read_event_value(struct iio_dev *indio_dev,
> if (power_mode < 0)
> return power_mode;
>
> - us = ret * mma8452_time_step_us[power_mode][
> + us = reg * mma8452_time_step_us[power_mode][
> mma8452_get_odr_index(data)];
> *val = us / USEC_PER_SEC;
> *val2 = us % USEC_PER_SEC;
> @@ -860,12 +875,11 @@ static int mma8452_read_event_value(struct iio_dev *indio_dev,
> return IIO_VAL_INT_PLUS_MICRO;
>
> case IIO_EV_INFO_HIGH_PASS_FILTER_3DB:
> - ret = i2c_smbus_read_byte_data(data->client,
> - MMA8452_TRANSIENT_CFG);
> + ret = regmap_read(data->regmap, MMA8452_TRANSIENT_CFG, ®);
> if (ret < 0)
> return ret;
>
> - if (ret & MMA8452_TRANSIENT_CFG_HPF_BYP) {
> + if (reg & MMA8452_TRANSIENT_CFG_HPF_BYP) {
> *val = 0;
> *val2 = 0;
> } else {
> @@ -918,10 +932,9 @@ static int mma8452_write_event_value(struct iio_dev *indio_dev,
> return mma8452_change_config(data, ev_regs->ev_count, steps);
>
> case IIO_EV_INFO_HIGH_PASS_FILTER_3DB:
> - reg = i2c_smbus_read_byte_data(data->client,
> - MMA8452_TRANSIENT_CFG);
> - if (reg < 0)
> - return reg;
> + ret = regmap_read(data->regmap, MMA8452_TRANSIENT_CFG, ®);
> + if (ret < 0)
> + return ret;
>
> if (val == 0 && val2 == 0) {
> reg |= MMA8452_TRANSIENT_CFG_HPF_BYP;
> @@ -945,6 +958,7 @@ static int mma8452_read_event_config(struct iio_dev *indio_dev,
> enum iio_event_direction dir)
> {
> struct mma8452_data *data = iio_priv(indio_dev);
> + unsigned int reg;
> int ret;
> const struct mma8452_event_regs *ev_regs;
>
> @@ -956,12 +970,11 @@ static int mma8452_read_event_config(struct iio_dev *indio_dev,
> case IIO_EV_DIR_FALLING:
> return mma8452_freefall_mode_enabled(data);
> case IIO_EV_DIR_RISING:
> - ret = i2c_smbus_read_byte_data(data->client,
> - ev_regs->ev_cfg);
> + ret = regmap_read(data->regmap, ev_regs->ev_cfg, ®);
> if (ret < 0)
> return ret;
>
> - return !!(ret & BIT(chan->scan_index +
> + return !!(reg & BIT(chan->scan_index +
> ev_regs->ev_cfg_chan_shift));
> default:
> return -EINVAL;
> @@ -975,14 +988,15 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev,
> int state)
> {
> struct mma8452_data *data = iio_priv(indio_dev);
> - int val, ret;
> + unsigned int reg;
> + int ret;
> const struct mma8452_event_regs *ev_regs;
>
> ret = mma8452_get_event_regs(data, chan, dir, &ev_regs);
> if (ret)
> return ret;
>
> - ret = mma8452_set_runtime_pm_state(data->client, state);
> + ret = mma8452_set_runtime_pm_state(data->dev, state);
> if (ret)
> return ret;
>
> @@ -990,30 +1004,30 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev,
> case IIO_EV_DIR_FALLING:
> return mma8452_set_freefall_mode(data, state);
> case IIO_EV_DIR_RISING:
> - val = i2c_smbus_read_byte_data(data->client, ev_regs->ev_cfg);
> - if (val < 0)
> - return val;
> + ret = regmap_read(data->regmap, ev_regs->ev_cfg, ®);
> + if (ret < 0)
> + return ret;
>
> if (state) {
> if (mma8452_freefall_mode_enabled(data)) {
> - val &= ~BIT(idx_x + ev_regs->ev_cfg_chan_shift);
> - val &= ~BIT(idx_y + ev_regs->ev_cfg_chan_shift);
> - val &= ~BIT(idx_z + ev_regs->ev_cfg_chan_shift);
> - val |= MMA8452_FF_MT_CFG_OAE;
> + reg &= ~BIT(idx_x + ev_regs->ev_cfg_chan_shift);
> + reg &= ~BIT(idx_y + ev_regs->ev_cfg_chan_shift);
> + reg &= ~BIT(idx_z + ev_regs->ev_cfg_chan_shift);
> + reg |= MMA8452_FF_MT_CFG_OAE;
> }
> - val |= BIT(chan->scan_index +
> + reg |= BIT(chan->scan_index +
> ev_regs->ev_cfg_chan_shift);
> } else {
> if (mma8452_freefall_mode_enabled(data))
> return 0;
>
> - val &= ~BIT(chan->scan_index +
> + reg &= ~BIT(chan->scan_index +
> ev_regs->ev_cfg_chan_shift);
> }
>
> - val |= ev_regs->ev_cfg_ele;
> + reg |= ev_regs->ev_cfg_ele;
>
> - return mma8452_change_config(data, ev_regs->ev_cfg, val);
> + return mma8452_change_config(data, ev_regs->ev_cfg, reg);
> default:
> return -EINVAL;
> }
> @@ -1023,27 +1037,28 @@ static void mma8452_transient_interrupt(struct iio_dev *indio_dev)
> {
> struct mma8452_data *data = iio_priv(indio_dev);
> s64 ts = iio_get_time_ns(indio_dev);
> - int src;
> + unsigned int reg;
> + int ret;
>
> - src = i2c_smbus_read_byte_data(data->client, MMA8452_TRANSIENT_SRC);
> - if (src < 0)
> + ret = regmap_read(data->regmap, MMA8452_TRANSIENT_SRC, ®);
> + if (ret < 0)
> return;
>
> - if (src & MMA8452_TRANSIENT_SRC_XTRANSE)
> + if (reg & MMA8452_TRANSIENT_SRC_XTRANSE)
> iio_push_event(indio_dev,
> IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X,
> IIO_EV_TYPE_MAG,
> IIO_EV_DIR_RISING),
> ts);
>
> - if (src & MMA8452_TRANSIENT_SRC_YTRANSE)
> + if (reg & MMA8452_TRANSIENT_SRC_YTRANSE)
> iio_push_event(indio_dev,
> IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Y,
> IIO_EV_TYPE_MAG,
> IIO_EV_DIR_RISING),
> ts);
>
> - if (src & MMA8452_TRANSIENT_SRC_ZTRANSE)
> + if (reg & MMA8452_TRANSIENT_SRC_ZTRANSE)
> iio_push_event(indio_dev,
> IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_Z,
> IIO_EV_TYPE_MAG,
> @@ -1055,22 +1070,22 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
> {
> struct iio_dev *indio_dev = p;
> struct mma8452_data *data = iio_priv(indio_dev);
> - int ret = IRQ_NONE;
> - int src;
> + int rc, ret = IRQ_NONE;
> + unsigned int reg;
renaming src to reg is I suppose consistent with the rest of the
driver but it does result in a fair bit of churn in here.
I suppose it doesn't really matter though as easy enough to check.
>
> - src = i2c_smbus_read_byte_data(data->client, MMA8452_INT_SRC);
> - if (src < 0)
> - return IRQ_NONE;
> + rc = regmap_read(data->regmap, MMA8452_INT_SRC, ®);
> + if (rc < 0)
> + return ret;
Keep this as IRQ_NONE as it makes it easy to check rather than having to
go see what ret is set to above.
>
> - if (!(src & (data->chip_info->enabled_events | MMA8452_INT_DRDY)))
> - return IRQ_NONE;
> + if (!(reg & (data->chip_info->enabled_events | MMA8452_INT_DRDY)))
> + return ret;
Same here
>
> - if (src & MMA8452_INT_DRDY) {
> + if (reg & MMA8452_INT_DRDY) {
> iio_trigger_poll_chained(indio_dev->trig);
> ret = IRQ_HANDLED;
> }
>
> - if (src & MMA8452_INT_FF_MT) {
> + if (reg & MMA8452_INT_FF_MT) {
> if (mma8452_freefall_mode_enabled(data)) {
> s64 ts = iio_get_time_ns(indio_dev);
>
> @@ -1084,7 +1099,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
> ret = IRQ_HANDLED;
> }
>
> - if (src & MMA8452_INT_TRANS) {
> + if (reg & MMA8452_INT_TRANS) {
> mma8452_transient_interrupt(indio_dev);
> ret = IRQ_HANDLED;
> }
> @@ -1125,12 +1140,10 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev,
> if (!readval)
> return mma8452_change_config(data, reg, writeval);
>
> - ret = i2c_smbus_read_byte_data(data->client, reg);
> + ret = regmap_read(data->regmap, reg, readval);
> if (ret < 0)
> return ret;
>
> - *readval = ret;
> -
> return 0;
> }
>
> @@ -1430,15 +1443,16 @@ static int mma8452_data_rdy_trigger_set_state(struct iio_trigger *trig,
> {
> struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
> struct mma8452_data *data = iio_priv(indio_dev);
> - int reg, ret;
> + unsigned int reg;
> + int ret;
>
> - ret = mma8452_set_runtime_pm_state(data->client, state);
> + ret = mma8452_set_runtime_pm_state(data->dev, state);
> if (ret)
> return ret;
>
> - reg = i2c_smbus_read_byte_data(data->client, MMA8452_CTRL_REG4);
> - if (reg < 0)
> - return reg;
> + ret = regmap_read(data->regmap, MMA8452_CTRL_REG4, ®);
> + if (ret < 0)
> + return ret;
>
> if (state)
> reg |= MMA8452_INT_DRDY;
> @@ -1459,13 +1473,13 @@ static int mma8452_trigger_setup(struct iio_dev *indio_dev)
> struct iio_trigger *trig;
> int ret;
>
> - trig = devm_iio_trigger_alloc(&data->client->dev, "%s-dev%d",
> + trig = devm_iio_trigger_alloc(data->dev, "%s-dev%d",
> indio_dev->name,
> indio_dev->id);
> if (!trig)
> return -ENOMEM;
>
> - trig->dev.parent = &data->client->dev;
> + trig->dev.parent = data->dev;
> trig->ops = &mma8452_trigger_ops;
> iio_trigger_set_drvdata(trig, indio_dev);
>
> @@ -1524,6 +1538,8 @@ static int mma8452_probe(struct i2c_client *client,
> {
> struct mma8452_data *data;
> struct iio_dev *indio_dev;
> + struct regmap *regmap;
> + unsigned int reg;
> int ret;
> const struct of_device_id *match;
>
> @@ -1537,10 +1553,18 @@ static int mma8452_probe(struct i2c_client *client,
> if (!indio_dev)
> return -ENOMEM;
>
> + regmap = devm_regmap_init_i2c(client, &mma8452_regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(&client->dev, "failed to initialize regmap\n");
> + return PTR_ERR(regmap);
> + }
> +
> data = iio_priv(indio_dev);
> - data->client = client;
> + i2c_set_clientdata(client, indio_dev);
The move of this feels unrelated, but maybe I'm missing something.
> + data->dev = &client->dev;
> mutex_init(&data->lock);
> data->chip_info = match->data;
> + data->regmap = regmap;
>
> data->vdd_reg = devm_regulator_get(&client->dev, "vdd");
> if (IS_ERR(data->vdd_reg))
> @@ -1564,18 +1588,18 @@ static int mma8452_probe(struct i2c_client *client,
> goto disable_regulator_vdd;
> }
>
> - ret = i2c_smbus_read_byte_data(client, MMA8452_WHO_AM_I);
> + ret = regmap_read(data->regmap, MMA8452_WHO_AM_I, ®);
> if (ret < 0)
> goto disable_regulators;
>
> - switch (ret) {
> + switch (reg) {
> case MMA8451_DEVICE_ID:
> case MMA8452_DEVICE_ID:
> case MMA8453_DEVICE_ID:
> case MMA8652_DEVICE_ID:
> case MMA8653_DEVICE_ID:
> case FXLS8471_DEVICE_ID:
> - if (ret == data->chip_info->chip_id)
> + if (reg == data->chip_info->chip_id)
> break;
> fallthrough;
> default:
> @@ -1586,7 +1610,6 @@ static int mma8452_probe(struct i2c_client *client,
> dev_info(&client->dev, "registering %s accelerometer; ID 0x%x\n",
> match->compatible, data->chip_info->chip_id);
>
> - i2c_set_clientdata(client, indio_dev);
> indio_dev->info = &mma8452_info;
> indio_dev->name = id->name;
> indio_dev->modes = INDIO_DIRECT_MODE;
> @@ -1599,8 +1622,8 @@ static int mma8452_probe(struct i2c_client *client,
> goto disable_regulators;
>
> data->data_cfg = MMA8452_DATA_CFG_FS_2G;
> - ret = i2c_smbus_write_byte_data(client, MMA8452_DATA_CFG,
> - data->data_cfg);
> + ret = regmap_write(data->regmap, MMA8452_DATA_CFG,
> + data->data_cfg);
> if (ret < 0)
> goto disable_regulators;
>
> @@ -1608,8 +1631,8 @@ static int mma8452_probe(struct i2c_client *client,
> * By default set transient threshold to max to avoid events if
> * enabling without configuring threshold.
> */
> - ret = i2c_smbus_write_byte_data(client, MMA8452_TRANSIENT_THS,
> - MMA8452_TRANSIENT_THS_MASK);
> + ret = regmap_write(data->regmap, MMA8452_TRANSIENT_THS,
> + MMA8452_TRANSIENT_THS_MASK);
> if (ret < 0)
> goto disable_regulators;
>
> @@ -1621,18 +1644,16 @@ static int mma8452_probe(struct i2c_client *client,
> if (irq2 == client->irq) {
> dev_dbg(&client->dev, "using interrupt line INT2\n");
> } else {
> - ret = i2c_smbus_write_byte_data(client,
> - MMA8452_CTRL_REG5,
> - data->chip_info->all_events);
> + ret = regmap_write(data->regmap, MMA8452_CTRL_REG5,
> + data->chip_info->all_events);
> if (ret < 0)
> goto disable_regulators;
>
> dev_dbg(&client->dev, "using interrupt line INT1\n");
> }
>
> - ret = i2c_smbus_write_byte_data(client,
> - MMA8452_CTRL_REG4,
> - data->chip_info->enabled_events);
> + ret = regmap_write(data->regmap, MMA8452_CTRL_REG4,
> + data->chip_info->enabled_events);
> if (ret < 0)
> goto disable_regulators;
>
> @@ -1646,8 +1667,8 @@ static int mma8452_probe(struct i2c_client *client,
>
> data->sleep_val = mma8452_calculate_sleep(data);
>
> - ret = i2c_smbus_write_byte_data(client, MMA8452_CTRL_REG1,
> - data->ctrl_reg1);
> + ret = regmap_write(data->regmap, MMA8452_CTRL_REG1,
> + data->ctrl_reg1);
Can drop the line break here.
> if (ret < 0)
> goto trigger_cleanup;
>
> @@ -1735,7 +1756,7 @@ static int mma8452_runtime_suspend(struct device *dev)
> ret = mma8452_standby(data);
> mutex_unlock(&data->lock);
> if (ret < 0) {
> - dev_err(&data->client->dev, "powering off device failed\n");
> + dev_err(data->dev, "powering off device failed\n");
> return -EAGAIN;
> }
>
Powered by blists - more mailing lists