| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9aa7661da4b54929a35b6635693807102d99684b.1615187284.git.matti.vaittinen@fi.rohmeurope.com>
Date: Mon, 8 Mar 2021 10:41:41 +0200
From: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
To: matti.vaittinen@...rohmeurope.com, mazziesaccount@...il.com
Cc: MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Guenter Roeck <linux@...ck-us.net>,
Hans de Goede <hdegoede@...hat.com>,
Mark Gross <mgross@...ux.intel.com>,
Matti Vaittinen <matti.vaittinen@...rohmeurope.com>,
gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, platform-driver-x86@...r.kernel.org
Subject: [RFC PATCH v2 3/8] extconn: Clean-up few drivers by using managed
work init
Few drivers implement remove call-back only for ensuring a delayed
work gets cancelled prior driver removal. Clean-up these by switching
to use devm_delayed_work_autocancel() instead.
Additionally, this helps avoiding mixing devm and manual resource
management and cleans up a (theoretical?) bug from extconn-palmas.c
and extcon-qcom-spmi-misc.c where (devm managed)IRQ might schedule
new work item after wq was cleaned at remove().
This change is compile-tested only. All testing is appreciated.
Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
---
drivers/extcon/extcon-gpio.c | 15 ++++-----------
drivers/extcon/extcon-intel-int3496.c | 16 ++++------------
drivers/extcon/extcon-palmas.c | 17 ++++++-----------
drivers/extcon/extcon-qcom-spmi-misc.c | 17 ++++++-----------
4 files changed, 20 insertions(+), 45 deletions(-)
diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index c211222f5d0c..4105df74f2b0 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -9,6 +9,7 @@
* (originally switch class is supported)
*/
+#include <linux/devm-helpers.h>
#include <linux/extcon-provider.h>
#include <linux/gpio/consumer.h>
#include <linux/init.h>
@@ -112,7 +113,9 @@ static int gpio_extcon_probe(struct platform_device *pdev)
if (ret < 0)
return ret;
- INIT_DELAYED_WORK(&data->work, gpio_extcon_work);
+ ret = devm_delayed_work_autocancel(dev, &data->work, gpio_extcon_work);
+ if (ret)
+ return ret;
/*
* Request the interrupt of gpio to detect whether external connector
@@ -131,15 +134,6 @@ static int gpio_extcon_probe(struct platform_device *pdev)
return 0;
}
-static int gpio_extcon_remove(struct platform_device *pdev)
-{
- struct gpio_extcon_data *data = platform_get_drvdata(pdev);
-
- cancel_delayed_work_sync(&data->work);
-
- return 0;
-}
-
#ifdef CONFIG_PM_SLEEP
static int gpio_extcon_resume(struct device *dev)
{
@@ -158,7 +152,6 @@ static SIMPLE_DEV_PM_OPS(gpio_extcon_pm_ops, NULL, gpio_extcon_resume);
static struct platform_driver gpio_extcon_driver = {
.probe = gpio_extcon_probe,
- .remove = gpio_extcon_remove,
.driver = {
.name = "extcon-gpio",
.pm = &gpio_extcon_pm_ops,
diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index 80c9abcc3f97..fb527c23639e 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -11,6 +11,7 @@
*/
#include <linux/acpi.h>
+#include <linux/devm-helpers.h>
#include <linux/extcon-provider.h>
#include <linux/gpio/consumer.h>
#include <linux/interrupt.h>
@@ -101,7 +102,9 @@ static int int3496_probe(struct platform_device *pdev)
return -ENOMEM;
data->dev = dev;
- INIT_DELAYED_WORK(&data->work, int3496_do_usb_id);
+ ret = devm_delayed_work_autocancel(dev, &data->work, int3496_do_usb_id);
+ if (ret)
+ return ret;
data->gpio_usb_id = devm_gpiod_get(dev, "id", GPIOD_IN);
if (IS_ERR(data->gpio_usb_id)) {
@@ -155,16 +158,6 @@ static int int3496_probe(struct platform_device *pdev)
return 0;
}
-static int int3496_remove(struct platform_device *pdev)
-{
- struct int3496_data *data = platform_get_drvdata(pdev);
-
- devm_free_irq(&pdev->dev, data->usb_id_irq, data);
- cancel_delayed_work_sync(&data->work);
-
- return 0;
-}
-
static const struct acpi_device_id int3496_acpi_match[] = {
{ "INT3496" },
{ }
@@ -177,7 +170,6 @@ static struct platform_driver int3496_driver = {
.acpi_match_table = int3496_acpi_match,
},
.probe = int3496_probe,
- .remove = int3496_remove,
};
module_platform_driver(int3496_driver);
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index a2852bcc5f0d..d2c1a8b89c08 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -9,6 +9,7 @@
* Author: Hema HK <hemahk@...com>
*/
+#include <linux/devm-helpers.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
@@ -237,7 +238,11 @@ static int palmas_usb_probe(struct platform_device *pdev)
palmas_usb->sw_debounce_jiffies = msecs_to_jiffies(debounce);
}
- INIT_DELAYED_WORK(&palmas_usb->wq_detectid, palmas_gpio_id_detect);
+ status = devm_delayed_work_autocancel(&pdev->dev,
+ &palmas_usb->wq_detectid,
+ palmas_gpio_id_detect);
+ if (status)
+ return status;
palmas->usb = palmas_usb;
palmas_usb->palmas = palmas;
@@ -359,15 +364,6 @@ static int palmas_usb_probe(struct platform_device *pdev)
return 0;
}
-static int palmas_usb_remove(struct platform_device *pdev)
-{
- struct palmas_usb *palmas_usb = platform_get_drvdata(pdev);
-
- cancel_delayed_work_sync(&palmas_usb->wq_detectid);
-
- return 0;
-}
-
#ifdef CONFIG_PM_SLEEP
static int palmas_usb_suspend(struct device *dev)
{
@@ -422,7 +418,6 @@ static const struct of_device_id of_palmas_match_tbl[] = {
static struct platform_driver palmas_usb_driver = {
.probe = palmas_usb_probe,
- .remove = palmas_usb_remove,
.driver = {
.name = "palmas-usb",
.of_match_table = of_palmas_match_tbl,
diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c
index 6b836ae62176..74d57d951b68 100644
--- a/drivers/extcon/extcon-qcom-spmi-misc.c
+++ b/drivers/extcon/extcon-qcom-spmi-misc.c
@@ -7,6 +7,7 @@
* Stephen Boyd <stephen.boyd@...aro.org>
*/
+#include <linux/devm-helpers.h>
#include <linux/extcon-provider.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -80,7 +81,11 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
}
info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
- INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
+
+ ret = devm_delayed_work_autocancel(dev, &info->wq_detcable,
+ qcom_usb_extcon_detect_cable);
+ if (ret)
+ return ret;
info->irq = platform_get_irq_byname(pdev, "usb_id");
if (info->irq < 0)
@@ -105,15 +110,6 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
return 0;
}
-static int qcom_usb_extcon_remove(struct platform_device *pdev)
-{
- struct qcom_usb_extcon_info *info = platform_get_drvdata(pdev);
-
- cancel_delayed_work_sync(&info->wq_detcable);
-
- return 0;
-}
-
#ifdef CONFIG_PM_SLEEP
static int qcom_usb_extcon_suspend(struct device *dev)
{
@@ -149,7 +145,6 @@ MODULE_DEVICE_TABLE(of, qcom_usb_extcon_dt_match);
static struct platform_driver qcom_usb_extcon_driver = {
.probe = qcom_usb_extcon_probe,
- .remove = qcom_usb_extcon_remove,
.driver = {
.name = "extcon-pm8941-misc",
.pm = &qcom_usb_extcon_pm_ops,
--
2.25.4
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
Powered by blists - more mailing lists