| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAKmqyKMyebw0RDHfvf+x==1dvi4gu0PHFNqh+9rN_ng+py31vw@mail.gmail.com>
Date: Tue, 9 Mar 2021 18:34:16 -0500
From: Alistair Francis <alistair23@...il.com>
To: Shawn Guo <shawnguo@...nel.org>
Cc: Alistair Francis <alistair@...stair23.me>,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>,
Rob Herring <robh+dt@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Sascha Hauer <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
dl-linux-imx <linux-imx@....com>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
devicetree <devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 1/3] ARM: imx7d-remarkable2.dts: Initial device tree
for reMarkable2
On Wed, Mar 3, 2021 at 8:44 AM Shawn Guo <shawnguo@...nel.org> wrote:
>
> On Wed, Feb 03, 2021 at 07:03:14PM -0800, Alistair Francis wrote:
> > The reMarkable2 (https://remarkable.com) is an e-ink tablet based on
> > the imx7d SoC.
> >
> > This commit is based on the DTS provide by reMarkable but ported to the
> > latest kernel (instead of 4.14). I have removed references to
> > non-upstream devices and have changed the UART so that the console can
> > be accessed without having to open up the device via the OTG pogo pins.
>
> Just out of curiosity, this is a DIY cable or something generally
> available from vendor?
It's a DIY cable, it's a bit of a pain to put together. You can see
what it looks like here: https://github.com/ddvk/remarkable2-recovery
>
> >
> > Currently the kernel boots, but there is no support for the dispaly,
> > WiFi or the power controller chips.
>
> There are still some WiFi related devices. Can we drop all those
> untested stuff?
I have WiFi working on the 5.4 NXP branch. I was actually thinking
that WiFi should just work if the rootFS and FW all match. The main
problem is that the kernel expects a firmware version that isn't in
linux-firmware.
I have removed it for now though.
>
> >
> > Signed-off-by: Alistair Francis <alistair@...stair23.me>
> > ---
> > arch/arm/boot/dts/Makefile | 1 +
> > arch/arm/boot/dts/imx7d-remarkable2.dts | 253 ++++++++++++++++++++++++
> > 2 files changed, 254 insertions(+)
> > create mode 100644 arch/arm/boot/dts/imx7d-remarkable2.dts
> >
> > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> > index 3d1ea0b25168..9608c363b25f 100644
> > --- a/arch/arm/boot/dts/Makefile
> > +++ b/arch/arm/boot/dts/Makefile
> > @@ -658,6 +658,7 @@ dtb-$(CONFIG_SOC_IMX7D) += \
> > imx7d-pico-hobbit.dtb \
> > imx7d-pico-nymph.dtb \
> > imx7d-pico-pi.dtb \
> > + imx7d-remarkable2.dtb \
> > imx7d-sbc-imx7.dtb \
> > imx7d-sdb.dtb \
> > imx7d-sdb-reva.dtb \
> > diff --git a/arch/arm/boot/dts/imx7d-remarkable2.dts b/arch/arm/boot/dts/imx7d-remarkable2.dts
> > new file mode 100644
> > index 000000000000..0aae13f5eed6
> > --- /dev/null
> > +++ b/arch/arm/boot/dts/imx7d-remarkable2.dts
> > @@ -0,0 +1,253 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> > + * Copyright (C) 2019 reMarkable AS - http://www.remarkable.com/
> > + *
> > + */
> > +
> > +/dts-v1/;
> > +
> > +#include "imx7d.dtsi"
> > +
> > +/ {
> > + model = "reMarkable 2.0";
> > + compatible = "fsl,imx7d-remarkable2", "fsl,imx7d";
>
> The new compatible needs to be documented. Also the compatible doesn't
> look right, as this is a device from reMarkable rather than FSL.
Done and done.
Alistair
>
> Shawn
>
> > +
> > + chosen {
> > + stdout-path = &uart6;
> > + };
> > +
> > + memory {
> > + reg = <0x80000000 0x40000000>;
> > + };
> > +
> > + reg_brcm: regulator-brcm {
> > + compatible = "regulator-fixed";
> > + regulator-name = "brcm_reg";
> > + regulator-min-microvolt = <3300000>;
> > + regulator-max-microvolt = <3300000>;
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_brcm_reg>;
> > + gpio = <&gpio6 13 GPIO_ACTIVE_HIGH>;
> > + enable-active-high;
> > + startup-delay-us = <150>;
> > + };
> > +
> > + wifi_pwrseq: wifi_pwrseq {
> > + compatible = "mmc-pwrseq-simple";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_wifi>;
> > + reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
> > + clocks = <&clks IMX7D_CLKO2_ROOT_DIV>;
> > + clock-names = "ext_clock";
> > + };
> > +};
> > +
> > +&clks {
> > + assigned-clocks = <&clks IMX7D_CLKO2_ROOT_SRC>,
> > + <&clks IMX7D_CLKO2_ROOT_DIV>;
> > + assigned-clock-parents = <&clks IMX7D_CKIL>;
> > + assigned-clock-rates = <0>, <32768>;
> > +};
> > +
> > +&crypto {
> > + status = "disabled";
> > +};
> > +
> > +&dma_apbh {
> > + status = "disabled";
> > +};
> > +
> > +&sdma {
> > + status = "okay";
> > +};
> > +
> > +&uart1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart1>;
> > + assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
> > + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> > + status = "okay";
> > +};
> > +
> > +&uart6 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_uart6>;
> > + assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
> > + assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
> > + status = "okay";
> > +};
> > +
> > +&usbotg2 {
> > + srp-disable;
> > + hnp-disable;
> > + status = "okay";
> > +};
> > +
> > +&usdhc2 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > + pinctrl-names = "default", "state_100mhz", "sleep";
> > + pinctrl-0 = <&pinctrl_usdhc2>;
> > + pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
> > + pinctrl-2 = <&pinctrl_usdhc2>;
> > + mmc-pwrseq = <&wifi_pwrseq>;
> > + vmmc-supply = <®_brcm>;
> > + bus-width = <4>;
> > + non-removable;
> > + keep-power-in-suspend;
> > + cap-power-off-card;
> > + status = "okay";
> > +
> > + brcmf: bcrmf@1 {
> > + reg = <1>;
> > + compatible = "brcm,bcm4329-fmac";
> > + };
> > +};
> > +
> > +&usdhc3 {
> > + pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
> > + pinctrl-0 = <&pinctrl_usdhc3>;
> > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
> > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
> > + pinctrl-3 = <&pinctrl_usdhc3>;
> > + assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
> > + assigned-clock-rates = <400000000>;
> > + bus-width = <8>;
> > + non-removable;
> > + status = "okay";
> > +};
> > +
> > +&wdog1 {
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&pinctrl_wdog>;
> > + fsl,ext-reset-output;
> > +};
> > +
> > +&iomuxc_lpsr {
> > + pinctrl_digitizer_reg: digitizerreggrp {
> > + fsl,pins = <
> > + /* DIGITIZER_PWR_EN */
> > + MX7D_PAD_LPSR_GPIO1_IO06__GPIO1_IO6 0x14
> > + >;
> > + };
> > +};
> > +
> > +&iomuxc {
> > + pinctrl_brcm_reg: brcmreggrp {
> > + fsl,pins = <
> > + /* WIFI_PWR_EN */
> > + MX7D_PAD_SAI1_TX_BCLK__GPIO6_IO13 0x14
> > + >;
> > + };
> > +
> > + pinctrl_uart1: uart1grp {
> > + fsl,pins = <
> > + MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
> > + MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
> > + >;
> > + };
> > +
> > + pinctrl_uart6: uart6grp {
> > + fsl,pins = <
> > + MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x79
> > + MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x79
> > + >;
> > + };
> > +
> > + pinctrl_usdhc2: usdhc2grp {
> > + fsl,pins = <
> > + MX7D_PAD_SD2_CMD__SD2_CMD 0x59
> > + MX7D_PAD_SD2_CLK__SD2_CLK 0x19
> > + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x59
> > + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x59
> > + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x59
> > + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x59
> > + >;
> > + };
> > +
> > + pinctrl_usdhc2_100mhz: usdhc2grp_100mhz {
> > + fsl,pins = <
> > + MX7D_PAD_SD2_CMD__SD2_CMD 0x5a
> > + MX7D_PAD_SD2_CLK__SD2_CLK 0x1a
> > + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5a
> > + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5a
> > + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5a
> > + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5a
> > + >;
> > + };
> > +
> > + pinctrl_usdhc2_200mhz: usdhc2grp_200mhz {
> > + fsl,pins = <
> > + MX7D_PAD_SD2_CMD__SD2_CMD 0x5b
> > + MX7D_PAD_SD2_CLK__SD2_CLK 0x1b
> > + MX7D_PAD_SD2_DATA0__SD2_DATA0 0x5b
> > + MX7D_PAD_SD2_DATA1__SD2_DATA1 0x5b
> > + MX7D_PAD_SD2_DATA2__SD2_DATA2 0x5b
> > + MX7D_PAD_SD2_DATA3__SD2_DATA3 0x5b
> > + >;
> > + };
> > +
> > + pinctrl_usdhc3: usdhc3grp {
> > + fsl,pins = <
> > + MX7D_PAD_SD3_CMD__SD3_CMD 0x59
> > + MX7D_PAD_SD3_CLK__SD3_CLK 0x19
> > + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
> > + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
> > + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
> > + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
> > + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
> > + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
> > + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
> > + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
> > + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
> > + >;
> > + };
> > +
> > + pinctrl_usdhc3_100mhz: usdhc3grp_100mhz {
> > + fsl,pins = <
> > + MX7D_PAD_SD3_CMD__SD3_CMD 0x5a
> > + MX7D_PAD_SD3_CLK__SD3_CLK 0x1a
> > + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5a
> > + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5a
> > + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5a
> > + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5a
> > + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5a
> > + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5a
> > + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5a
> > + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5a
> > + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1a
> > + >;
> > + };
> > +
> > + pinctrl_usdhc3_200mhz: usdhc3grp_200mhz {
> > + fsl,pins = <
> > + MX7D_PAD_SD3_CMD__SD3_CMD 0x5b
> > + MX7D_PAD_SD3_CLK__SD3_CLK 0x1b
> > + MX7D_PAD_SD3_DATA0__SD3_DATA0 0x5b
> > + MX7D_PAD_SD3_DATA1__SD3_DATA1 0x5b
> > + MX7D_PAD_SD3_DATA2__SD3_DATA2 0x5b
> > + MX7D_PAD_SD3_DATA3__SD3_DATA3 0x5b
> > + MX7D_PAD_SD3_DATA4__SD3_DATA4 0x5b
> > + MX7D_PAD_SD3_DATA5__SD3_DATA5 0x5b
> > + MX7D_PAD_SD3_DATA6__SD3_DATA6 0x5b
> > + MX7D_PAD_SD3_DATA7__SD3_DATA7 0x5b
> > + MX7D_PAD_SD3_STROBE__SD3_STROBE 0x1b
> > + >;
> > + };
> > +
> > + pinctrl_wdog: wdoggrp {
> > + fsl,pins = <
> > + MX7D_PAD_ENET1_COL__WDOG1_WDOG_ANY 0x74
> > + >;
> > + };
> > +
> > + pinctrl_wifi: wifigrp {
> > + fsl,pins = <
> > + /* WiFi Reg On */
> > + MX7D_PAD_SD2_CD_B__GPIO5_IO9 0x00000014
> > + /* WiFi Sleep 32k */
> > + MX7D_PAD_SD1_WP__CCM_CLKO2 0x00000014
> > + >;
> > + };
> > +};
> > --
> > 2.30.0
> >
Powered by blists - more mailing lists