| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1615278790-18053-4-git-send-email-anshuman.khandual@arm.com>
Date: Tue, 9 Mar 2021 14:03:07 +0530
From: Anshuman Khandual <anshuman.khandual@....com>
To: linux-mm@...ck.org
Cc: Anshuman Khandual <anshuman.khandual@....com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will@...nel.org>,
Michael Ellerman <mpe@...erman.id.au>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Paul Mackerras <paulus@...ba.org>,
Heiko Carstens <hca@...ux.ibm.com>,
Vasily Gorbik <gor@...ux.ibm.com>,
Christian Borntraeger <borntraeger@...ibm.com>,
Yoshinori Sato <ysato@...rs.sourceforge.jp>,
Rich Felker <dalias@...c.org>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>, x86@...nel.org,
"H. Peter Anvin" <hpa@...or.com>,
Andrew Morton <akpm@...ux-foundation.org>,
linux-arm-kernel@...ts.infradead.org, linux-ia64@...r.kernel.org,
linuxppc-dev@...ts.ozlabs.org, linux-s390@...r.kernel.org,
linux-sh@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH 3/6] mm: Generalize ARCH_ENABLE_MEMORY_[HOTPLUG|HOTREMOVE]
ARCH_ENABLE_MEMORY_[HOTPLUG|HOTREMOVE] configs have duplicate definitions
on platforms that subscribe them. Instead, just make them generic options
which can be selected on applicable platforms.
Cc: Catalin Marinas <catalin.marinas@....com>
Cc: Will Deacon <will@...nel.org>
Cc: Michael Ellerman <mpe@...erman.id.au>
Cc: Benjamin Herrenschmidt <benh@...nel.crashing.org>
Cc: Paul Mackerras <paulus@...ba.org>
Cc: Heiko Carstens <hca@...ux.ibm.com>
Cc: Vasily Gorbik <gor@...ux.ibm.com>
Cc: Christian Borntraeger <borntraeger@...ibm.com>
Cc: Yoshinori Sato <ysato@...rs.sourceforge.jp>
Cc: Rich Felker <dalias@...c.org>
Cc: Thomas Gleixner <tglx@...utronix.de>
Cc: Ingo Molnar <mingo@...hat.com>
Cc: x86@...nel.org
Cc: "H. Peter Anvin" <hpa@...or.com>
Cc: Andrew Morton <akpm@...ux-foundation.org>
Cc: linux-arm-kernel@...ts.infradead.org
Cc: linux-ia64@...r.kernel.org
Cc: linuxppc-dev@...ts.ozlabs.org
Cc: linux-s390@...r.kernel.org
Cc: linux-sh@...r.kernel.org
Cc: linux-mm@...ck.org
Cc: linux-kernel@...r.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@....com>
---
arch/arm64/Kconfig | 8 ++------
arch/ia64/Kconfig | 8 ++------
arch/powerpc/Kconfig | 8 ++------
arch/s390/Kconfig | 8 ++------
arch/sh/Kconfig | 2 ++
arch/sh/mm/Kconfig | 8 --------
arch/x86/Kconfig | 10 ++--------
mm/Kconfig | 6 ++++++
8 files changed, 18 insertions(+), 40 deletions(-)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 68fe3b5bf17a..67e904b0f32a 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -11,6 +11,8 @@ config ARM64
select ACPI_PPTT if ACPI
select ARCH_HAS_DEBUG_WX
select ARCH_BINFMT_ELF_STATE
+ select ARCH_ENABLE_MEMORY_HOTPLUG
+ select ARCH_ENABLE_MEMORY_HOTREMOVE
select ARCH_HAS_CACHE_LINE_SIZE
select ARCH_HAS_DEBUG_VIRTUAL
select ARCH_HAS_DEBUG_VM_PGTABLE
@@ -305,12 +307,6 @@ config ZONE_DMA32
bool "Support DMA32 zone" if EXPERT
default y
-config ARCH_ENABLE_MEMORY_HOTPLUG
- def_bool y
-
-config ARCH_ENABLE_MEMORY_HOTREMOVE
- def_bool y
-
config SMP
def_bool y
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 2ad7a8d29fcc..96ce53ad5c9d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -13,6 +13,8 @@ config IA64
select ARCH_MIGHT_HAVE_PC_SERIO
select ACPI
select ACPI_NUMA if NUMA
+ select ARCH_ENABLE_MEMORY_HOTPLUG
+ select ARCH_ENABLE_MEMORY_HOTREMOVE
select ARCH_SUPPORTS_ACPI
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
select ARCH_MIGHT_HAVE_ACPI_PDC if ACPI
@@ -250,12 +252,6 @@ config HOTPLUG_CPU
can be controlled through /sys/devices/system/cpu/cpu#.
Say N if you want to disable CPU hotplug.
-config ARCH_ENABLE_MEMORY_HOTPLUG
- def_bool y
-
-config ARCH_ENABLE_MEMORY_HOTREMOVE
- def_bool y
-
config SCHED_SMT
bool "SMT scheduler support"
depends on SMP
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a74c211e55b1..02a05a24659d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -118,6 +118,8 @@ config PPC
# Please keep this list sorted alphabetically.
#
select ARCH_32BIT_OFF_T if PPC32
+ select ARCH_ENABLE_MEMORY_HOTPLUG
+ select ARCH_ENABLE_MEMORY_HOTREMOVE
select ARCH_HAS_DEBUG_VIRTUAL
select ARCH_HAS_DEVMEM_IS_ALLOWED
select ARCH_HAS_ELF_RANDOMIZE
@@ -515,12 +517,6 @@ config ARCH_CPU_PROBE_RELEASE
def_bool y
depends on HOTPLUG_CPU
-config ARCH_ENABLE_MEMORY_HOTPLUG
- def_bool y
-
-config ARCH_ENABLE_MEMORY_HOTREMOVE
- def_bool y
-
config PPC64_SUPPORTS_MEMORY_FAILURE
bool "Add support for memory hwpoison"
depends on PPC_BOOK3S_64
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index c1ff874e6c2e..f8b356550daa 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -60,6 +60,8 @@ config S390
imply IMA_SECURE_AND_OR_TRUSTED_BOOT
select ARCH_32BIT_USTAT_F_TINODE
select ARCH_BINFMT_ELF_STATE
+ select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM
+ select ARCH_ENABLE_MEMORY_HOTREMOVE
select ARCH_HAS_DEBUG_VM_PGTABLE
select ARCH_HAS_DEBUG_WX
select ARCH_HAS_DEVMEM_IS_ALLOWED
@@ -626,12 +628,6 @@ config ARCH_SPARSEMEM_ENABLE
config ARCH_SPARSEMEM_DEFAULT
def_bool y
-config ARCH_ENABLE_MEMORY_HOTPLUG
- def_bool y if SPARSEMEM
-
-config ARCH_ENABLE_MEMORY_HOTREMOVE
- def_bool y
-
config ARCH_ENABLE_SPLIT_PMD_PTLOCK
def_bool y
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index a54b0c5de37b..68129537e350 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -2,6 +2,8 @@
config SUPERH
def_bool y
select ARCH_32BIT_OFF_T
+ select ARCH_ENABLE_MEMORY_HOTPLUG if SPARSEMEM && MMU
+ select ARCH_ENABLE_MEMORY_HOTREMOVE if SPARSEMEM && MMU
select ARCH_HAVE_CUSTOM_GPIO_H
select ARCH_HAVE_NMI_SAFE_CMPXCHG if (GUSA_RB || CPU_SH4A)
select ARCH_HAS_BINFMT_FLAT if !MMU
diff --git a/arch/sh/mm/Kconfig b/arch/sh/mm/Kconfig
index 77aa2f802d8d..d551a9cac41e 100644
--- a/arch/sh/mm/Kconfig
+++ b/arch/sh/mm/Kconfig
@@ -136,14 +136,6 @@ config ARCH_SPARSEMEM_DEFAULT
config ARCH_SELECT_MEMORY_MODEL
def_bool y
-config ARCH_ENABLE_MEMORY_HOTPLUG
- def_bool y
- depends on SPARSEMEM && MMU
-
-config ARCH_ENABLE_MEMORY_HOTREMOVE
- def_bool y
- depends on SPARSEMEM && MMU
-
config ARCH_MEMORY_PROBE
def_bool y
depends on MEMORY_HOTPLUG
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 51d171abb57a..503d8b2e8676 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -60,6 +60,8 @@ config X86
select ACPI_SYSTEM_POWER_STATES_SUPPORT if ACPI
select ARCH_32BIT_OFF_T if X86_32
select ARCH_CLOCKSOURCE_INIT
+ select ARCH_ENABLE_MEMORY_HOTPLUG if X86_64 || (X86_32 && HIGHMEM)
+ select ARCH_ENABLE_MEMORY_HOTREMOVE if MEMORY_HOTPLUG
select ARCH_HAS_ACPI_TABLE_UPGRADE if ACPI
select ARCH_HAS_CACHE_LINE_SIZE
select ARCH_HAS_DEBUG_VIRTUAL
@@ -2423,14 +2425,6 @@ config ARCH_HAS_ADD_PAGES
def_bool y
depends on X86_64 && ARCH_ENABLE_MEMORY_HOTPLUG
-config ARCH_ENABLE_MEMORY_HOTPLUG
- def_bool y
- depends on X86_64 || (X86_32 && HIGHMEM)
-
-config ARCH_ENABLE_MEMORY_HOTREMOVE
- def_bool y
- depends on MEMORY_HOTPLUG
-
config USE_PERCPU_NUMA_NODE_ID
def_bool y
depends on NUMA
diff --git a/mm/Kconfig b/mm/Kconfig
index 1c9a37fc651a..9b58fa08847d 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -149,6 +149,9 @@ config MEMORY_ISOLATION
config HAVE_BOOTMEM_INFO_NODE
def_bool n
+config ARCH_ENABLE_MEMORY_HOTPLUG
+ bool
+
# eventually, we can have this option just 'select SPARSEMEM'
config MEMORY_HOTPLUG
bool "Allow for memory hot-add"
@@ -177,6 +180,9 @@ config MEMORY_HOTPLUG_DEFAULT_ONLINE
Say N here if you want the default policy to keep all hot-plugged
memory blocks in 'offline' state.
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+ bool
+
config MEMORY_HOTREMOVE
bool "Allow for memory hot remove"
select HAVE_BOOTMEM_INFO_NODE if (X86_64 || PPC64)
--
2.20.1
Powered by blists - more mailing lists