[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210309121836.GU4207@pengutronix.de>
Date: Tue, 9 Mar 2021 13:18:36 +0100
From: Sascha Hauer <s.hauer@...gutronix.de>
To: dillon.minfei@...il.com
Cc: robh+dt@...nel.org, shawnguo@...nel.org, parthiban@...umiz.com,
kernel@...gutronix.de, festevam@...il.com, linux-imx@....com,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: dts: imx6ull: fix ubi mount failed on MYS-6ULX-IOT
board
On Tue, Mar 09, 2021 at 02:15:19PM +0800, dillon.minfei@...il.com wrote:
> From: dillon min <dillon.minfei@...il.com>
>
> This patch intend to fix ubi filesystem mount failed on MYS-6ULX-IOT board,
> from Micron MT29F2G08ABAEAWP's datasheets, we need to choose 4-bit ECC.
>
> Table 18: Error Management Details
>
> Description Requirement
>
> Minimum number of valid blocks (NVB) per LUN 2008
> Total available blocks per LUN 2048
> First spare area location x8: byte 2048 x16: word 1024
> Bad-block mark x8: 00h x16: 0000h
> Minimum required ECC 4-bit ECC per 528 bytes
> Minimum ECC with internal ECC enabled 4-bit ECC per 516 bytes (user data) + 8
> bytes (parity data)
> Minimum required ECC for block 0 if PROGRAM/
> ERASE cycles are less than 1000 1-bit ECC per 528 bytes
4-bit ECC is the minimum this chip requires. There's nothing wrong with
choosing a better ECC like the GPMI driver does by default.
It looks like you are papering over some other problem.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists