linux-kernel - [PATCH] arm64: dts: qcom: sc7280: Add WPSS remoteproc node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1615361829-22370-1-git-send-email-pillair@codeaurora.org>
Date:   Wed, 10 Mar 2021 13:07:09 +0530
From:   Rakesh Pillai <pillair@...eaurora.org>
To:     agross@...nel.org, bjorn.andersson@...aro.org, robh+dt@...nel.org
Cc:     sibis@...eaurora.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Rakesh Pillai <pillair@...eaurora.org>
Subject: [PATCH] arm64: dts: qcom: sc7280: Add WPSS remoteproc node

Add the WPSS remoteproc node in dts for
PIL loading.

Signed-off-by: Rakesh Pillai <pillair@...eaurora.org>
---
- This change is dependent on the below patch series
1) https://lore.kernel.org/patchwork/project/lkml/list/?series=487403
2) https://lore.kernel.org/patchwork/project/lkml/list/?series=488365
---
 arch/arm64/boot/dts/qcom/sc7280-idp.dts |  4 +++
 arch/arm64/boot/dts/qcom/sc7280.dtsi    | 47 +++++++++++++++++++++++++++++++++
 2 files changed, 51 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 950ecb2..603f56b 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -26,6 +26,10 @@
 	status = "okay";
 };
 
+&remoteproc_wpss {
+	status = "okay";
+};
+
 &uart5 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 8af6d77..26dd466 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -53,6 +53,16 @@
 			no-map;
 			reg = <0x0 0x80b00000 0x0 0x100000>;
 		};
+
+		wlan_fw_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x80c00000 0x0 0xc00000>;
+		};
+
+		wpss_mem: memory@...00000 {
+			no-map;
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+		};
 	};
 
 	cpus {
@@ -305,6 +315,43 @@
 			};
 		};
 
+		remoteproc_wpss: remoteproc@...0000 {
+			compatible = "qcom,sc7280-wpss-pil";
+			reg = <0 0x08a00000 0 0x10000>;
+
+			interrupts-extended = <&intc GIC_SPI 587 IRQ_TYPE_EDGE_RISING>,
+					      <&wpss_smp2p_in 0 0>,
+					      <&wpss_smp2p_in 1 0>,
+					      <&wpss_smp2p_in 2 0>,
+					      <&wpss_smp2p_in 3 0>,
+					      <&wpss_smp2p_in 7 0>;
+			interrupt-names = "wdog", "fatal", "ready", "handover",
+					  "stop-ack", "shutdown-ack";
+
+			memory-region = <&wpss_mem>;
+
+			qcom,smem-states = <&wpss_smp2p_out 0>;
+			qcom,smem-state-names = "stop";
+
+			resets = <&aoss_reset AOSS_CC_WCSS_RESTART>;
+			reset-names = "restart";
+
+			qcom,halt-regs = <&tcsr_mutex_regs 0x37000>;
+
+			status = "disabled";
+
+			glink-edge {
+				interrupts-extended = <&ipcc IPCC_CLIENT_WPSS
+							     IPCC_MPROC_SIGNAL_GLINK_QMP
+							     IRQ_TYPE_EDGE_RISING>;
+				mboxes = <&ipcc IPCC_CLIENT_WPSS
+						IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+				label = "wpss";
+				qcom,remote-pid = <13>;
+			};
+		};
+
 		pdc: interrupt-controller@...0000 {
 			compatible = "qcom,sc7280-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
-- 
2.7.4