| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210310132320.386282583@linuxfoundation.org>
Date: Wed, 10 Mar 2021 14:24:29 +0100
From: gregkh@...uxfoundation.org
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Alexander Lobakin <bloodyreaper@...dex.ru>,
"David S. Miller" <davem@...emloft.net>,
Pali Rohár <pali@...nel.org>
Subject: [PATCH 4.19 21/39] net: dsa: add GRO support via gro_cells
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
From: Alexander Lobakin <bloodyreaper@...dex.ru>
commit e131a5634830047923c694b4ce0c3b31745ff01b upstream.
gro_cells lib is used by different encapsulating netdevices, such as
geneve, macsec, vxlan etc. to speed up decapsulated traffic processing.
CPU tag is a sort of "encapsulation", and we can use the same mechs to
greatly improve overall DSA performance.
skbs are passed to the GRO layer after removing CPU tags, so we don't
need any new packet offload types as it was firstly proposed by me in
the first GRO-over-DSA variant [1].
The size of struct gro_cells is sizeof(void *), so hot struct
dsa_slave_priv becomes only 4/8 bytes bigger, and all critical fields
remain in one 32-byte cacheline.
The other positive side effect is that drivers for network devices
that can be shipped as CPU ports of DSA-driven switches can now use
napi_gro_frags() to pass skbs to kernel. Packets built that way are
completely non-linear and are likely being dropped without GRO.
This was tested on to-be-mainlined-soon Ethernet driver that uses
napi_gro_frags(), and the overall performance was on par with the
variant from [1], sometimes even better due to minimal overhead.
net.core.gro_normal_batch tuning may help to push it to the limit
on particular setups and platforms.
iperf3 IPoE VLAN NAT TCP forwarding (port1.218 -> port0) setup
on 1.2 GHz MIPS board:
5.7-rc2 baseline:
[ID] Interval Transfer Bitrate Retr
[ 5] 0.00-120.01 sec 9.00 GBytes 644 Mbits/sec 413 sender
[ 5] 0.00-120.00 sec 8.99 GBytes 644 Mbits/sec receiver
Iface RX packets TX packets
eth0 7097731 7097702
port0 426050 6671829
port1 6671681 425862
port1.218 6671677 425851
With this patch:
[ID] Interval Transfer Bitrate Retr
[ 5] 0.00-120.01 sec 12.2 GBytes 870 Mbits/sec 122 sender
[ 5] 0.00-120.00 sec 12.2 GBytes 870 Mbits/sec receiver
Iface RX packets TX packets
eth0 9474792 9474777
port0 455200 353288
port1 9019592 455035
port1.218 353144 455024
v2:
- Add some performance examples in the commit message;
- No functional changes.
[1] https://lore.kernel.org/netdev/20191230143028.27313-1-alobakin@dlink.ru/
Signed-off-by: Alexander Lobakin <bloodyreaper@...dex.ru>
Signed-off-by: David S. Miller <davem@...emloft.net>
Cc: Pali Rohár <pali@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
net/dsa/Kconfig | 1 +
net/dsa/dsa.c | 2 +-
net/dsa/dsa_priv.h | 3 +++
net/dsa/slave.c | 10 +++++++++-
4 files changed, 14 insertions(+), 2 deletions(-)
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -8,6 +8,7 @@ config NET_DSA
tristate "Distributed Switch Architecture"
depends on HAVE_NET_DSA && MAY_USE_DEVLINK
depends on BRIDGE || BRIDGE=n
+ select GRO_CELLS
select NET_SWITCHDEV
select PHYLINK
---help---
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -191,7 +191,7 @@ static int dsa_switch_rcv(struct sk_buff
if (dsa_skb_defer_rx_timestamp(p, skb))
return 0;
- netif_receive_skb(skb);
+ gro_cells_receive(&p->gcells, skb);
return 0;
}
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -15,6 +15,7 @@
#include <linux/netdevice.h>
#include <linux/netpoll.h>
#include <net/dsa.h>
+#include <net/gro_cells.h>
enum {
DSA_NOTIFIER_AGEING_TIME,
@@ -72,6 +73,8 @@ struct dsa_slave_priv {
struct pcpu_sw_netstats *stats64;
+ struct gro_cells gcells;
+
/* DSA port data, such as switch, port index, etc. */
struct dsa_port *dp;
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1337,6 +1337,11 @@ int dsa_slave_create(struct dsa_port *po
free_netdev(slave_dev);
return -ENOMEM;
}
+
+ ret = gro_cells_init(&p->gcells, slave_dev);
+ if (ret)
+ goto out_free;
+
p->dp = port;
INIT_LIST_HEAD(&p->mall_tc_list);
p->xmit = cpu_dp->tag_ops->xmit;
@@ -1347,7 +1352,7 @@ int dsa_slave_create(struct dsa_port *po
ret = dsa_slave_phy_setup(slave_dev);
if (ret) {
netdev_err(master, "error %d setting up slave phy\n", ret);
- goto out_free;
+ goto out_gcells;
}
dsa_slave_notify(slave_dev, DSA_PORT_REGISTER);
@@ -1366,6 +1371,8 @@ out_phy:
phylink_disconnect_phy(p->dp->pl);
rtnl_unlock();
phylink_destroy(p->dp->pl);
+out_gcells:
+ gro_cells_destroy(&p->gcells);
out_free:
free_percpu(p->stats64);
free_netdev(slave_dev);
@@ -1386,6 +1393,7 @@ void dsa_slave_destroy(struct net_device
dsa_slave_notify(slave_dev, DSA_PORT_UNREGISTER);
unregister_netdev(slave_dev);
phylink_destroy(dp->pl);
+ gro_cells_destroy(&p->gcells);
free_percpu(p->stats64);
free_netdev(slave_dev);
}
Powered by blists - more mailing lists