| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b3c3fafb-14d9-960b-d349-81a1c6a80843@xilinx.com>
Date: Wed, 10 Mar 2021 16:12:39 -0800
From: Lizhi Hou <lizhi.hou@...inx.com>
To: Tom Rix <trix@...hat.com>, Lizhi Hou <lizhi.hou@...inx.com>,
<linux-kernel@...r.kernel.org>
CC: <linux-fpga@...r.kernel.org>, <maxz@...inx.com>,
<sonal.santan@...inx.com>, <michal.simek@...inx.com>,
<stefanos@...inx.com>, <devicetree@...r.kernel.org>,
<mdf@...nel.org>, <robh@...nel.org>, Max Zhen <max.zhen@...inx.com>
Subject: Re: [PATCH V3 XRT Alveo 14/18] fpga: xrt: clock platform driver
Hi Tom,
On 03/05/2021 07:23 AM, Tom Rix wrote:
> why are clock and clkfeq separated ?
clock and clkfreq are two different IPs. clkfreq is a simple counter to
confirm the clock output is expected.
>
> On 2/17/21 10:40 PM, Lizhi Hou wrote:
>> Add clock driver. Clock is a hardware function discovered by walking
>> xclbin metadata. A platform device node will be created for it. Other
>> part of driver configures clock through clock driver.
>>
>> Signed-off-by: Sonal Santan <sonal.santan@...inx.com>
>> Signed-off-by: Max Zhen <max.zhen@...inx.com>
>> Signed-off-by: Lizhi Hou <lizhih@...inx.com>
>> ---
>> drivers/fpga/xrt/include/xleaf/clock.h | 31 ++
>> drivers/fpga/xrt/lib/xleaf/clock.c | 648 +++++++++++++++++++++++++
>> 2 files changed, 679 insertions(+)
>> create mode 100644 drivers/fpga/xrt/include/xleaf/clock.h
>> create mode 100644 drivers/fpga/xrt/lib/xleaf/clock.c
>>
>> diff --git a/drivers/fpga/xrt/include/xleaf/clock.h b/drivers/fpga/xrt/include/xleaf/clock.h
>> new file mode 100644
>> index 000000000000..a2da59b32551
>> --- /dev/null
>> +++ b/drivers/fpga/xrt/include/xleaf/clock.h
>> @@ -0,0 +1,31 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Header file for XRT Clock Leaf Driver
>> + *
>> + * Copyright (C) 2020-2021 Xilinx, Inc.
>> + *
>> + * Authors:
>> + * Lizhi Hou <Lizhi.Hou@...inx.com>
>> + */
>> +
>> +#ifndef _XRT_CLOCK_H_
>> +#define _XRT_CLOCK_H_
>> +
>> +#include "xleaf.h"
>> +#include <linux/xrt/xclbin.h>
>> +
>> +/*
>> + * CLOCK driver IOCTL calls.
>> + */
>> +enum xrt_clock_ioctl_cmd {
>> + XRT_CLOCK_SET = XRT_XLEAF_CUSTOM_BASE, /* See comments in xleaf.h */
>> + XRT_CLOCK_GET,
>> + XRT_CLOCK_VERIFY,
>> +};
>> +
>> +struct xrt_clock_ioctl_get {
>> + u16 freq;
>> + u32 freq_cnter;
>> +};
>> +
>> +#endif /* _XRT_CLOCK_H_ */
>> diff --git a/drivers/fpga/xrt/lib/xleaf/clock.c b/drivers/fpga/xrt/lib/xleaf/clock.c
>> new file mode 100644
>> index 000000000000..a067b501a607
>> --- /dev/null
>> +++ b/drivers/fpga/xrt/lib/xleaf/clock.c
>> @@ -0,0 +1,648 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Xilinx Alveo FPGA Clock Wizard Driver
>> + *
>> + * Copyright (C) 2020-2021 Xilinx, Inc.
>> + *
>> + * Authors:
>> + * Lizhi Hou<Lizhi.Hou@...inx.com>
>> + * Sonal Santan <sonals@...inx.com>
>> + * David Zhang <davidzha@...inx.com>
>> + */
>> +
>> +#include <linux/mod_devicetable.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <linux/io.h>
>> +#include "metadata.h"
>> +#include "xleaf.h"
>> +#include "xleaf/clock.h"
>> +#include "xleaf/clkfreq.h"
>> +
>> +/* CLOCK_MAX_NUM_CLOCKS should be a concept from XCLBIN_ in the future */
>> +#define CLOCK_MAX_NUM_CLOCKS 4
>> +#define OCL_CLKWIZ_STATUS_OFFSET 0x4
> OCL_CLKWIZ does not match the name of this file, change to something like XRT_CLOCK
Will change to XRT_CLOCK_
>> +#define OCL_CLKWIZ_STATUS_MASK 0xffff
>> +#define OCL_CLKWIZ_STATUS_MEASURE_START 0x1
>> +#define OCL_CLKWIZ_STATUS_MEASURE_DONE 0x2
>> +#define OCL_CLKWIZ_CONFIG_OFFSET(n) (0x200 + 4 * (n))
> This should be expanded to logical names of the registers.
>
> It's use below has a magic indexes.
Will change it.
>
>> +#define CLOCK_DEFAULT_EXPIRE_SECS 1
>> +
>> +#define CLOCK_ERR(clock, fmt, arg...) \
>> + xrt_err((clock)->pdev, fmt "\n", ##arg)
>> +#define CLOCK_WARN(clock, fmt, arg...) \
>> + xrt_warn((clock)->pdev, fmt "\n", ##arg)
>> +#define CLOCK_INFO(clock, fmt, arg...) \
>> + xrt_info((clock)->pdev, fmt "\n", ##arg)
>> +#define CLOCK_DBG(clock, fmt, arg...) \
>> + xrt_dbg((clock)->pdev, fmt "\n", ##arg)
>> +
>> +#define XRT_CLOCK "xrt_clock"
>> +
>> +struct clock {
>> + struct platform_device *pdev;
>> + void __iomem *clock_base;
>> + struct mutex clock_lock; /* clock dev lock */
>> +
>> + const char *clock_ep_name;
>> +};
>> +
>> +/*
>> + * Precomputed table with config0 and config2 register values together with
>> + * target frequency. The steps are approximately 5 MHz apart. Table is
>> + * generated by wiz.pl.
> where is wiz.pl ? include the script
wiz.pl may not be a accurate anymore. I will change the comment to "
Table is generated by platform creation tool. These are the only known
good values which have been validated on real hardware hence a fixed
table. Please see
https://www.xilinx.com/support/documentation/ip_documentation/clk_wiz/v6_0/pg065-clk-wiz.pdf
for programming guide.
>> + */
>> +static const struct xmgmt_ocl_clockwiz {
>> + /* target frequency */
>> + unsigned short ocl;
>> + /* config0 register */
>> + unsigned long config0;
> Should be u32
Will change.
>> + /* config2 register */
>> + unsigned int config2;
>> +} frequency_table[] = {
>> + {/*1275.000*/ 10.000, 0x02EE0C01, 0x0001F47F},
> Could clean up this table, to use spaces instead of tabs, move the comment out of branches
>
> /* freq */ { ocl, config0, config2 },
Sure
>
>> + {/*1575.000*/ 15.000, 0x02EE0F01, 0x00000069},
> ocl is short, the data if float, change the generator output an integer
Will fix.
>> + {/*1600.000*/ 20.000, 0x00001001, 0x00000050},
>> + {/*1600.000*/ 25.000, 0x00001001, 0x00000040},
>> + {/*1575.000*/ 30.000, 0x02EE0F01, 0x0001F434},
>> + {/*1575.000*/ 35.000, 0x02EE0F01, 0x0000002D},
>> + {/*1600.000*/ 40.000, 0x00001001, 0x00000028},
>> + {/*1575.000*/ 45.000, 0x02EE0F01, 0x00000023},
>> + {/*1600.000*/ 50.000, 0x00001001, 0x00000020},
>> + {/*1512.500*/ 55.000, 0x007D0F01, 0x0001F41B},
>> + {/*1575.000*/ 60.000, 0x02EE0F01, 0x0000FA1A},
>> + {/*1462.500*/ 65.000, 0x02710E01, 0x0001F416},
>> + {/*1575.000*/ 70.000, 0x02EE0F01, 0x0001F416},
>> + {/*1575.000*/ 75.000, 0x02EE0F01, 0x00000015},
>> + {/*1600.000*/ 80.000, 0x00001001, 0x00000014},
>> + {/*1487.500*/ 85.000, 0x036B0E01, 0x0001F411},
>> + {/*1575.000*/ 90.000, 0x02EE0F01, 0x0001F411},
>> + {/*1425.000*/ 95.000, 0x00FA0E01, 0x0000000F},
>> + {/*1600.000*/ 100.000, 0x00001001, 0x00000010},
>> + {/*1575.000*/ 105.000, 0x02EE0F01, 0x0000000F},
>> + {/*1512.500*/ 110.000, 0x007D0F01, 0x0002EE0D},
>> + {/*1437.500*/ 115.000, 0x01770E01, 0x0001F40C},
>> + {/*1575.000*/ 120.000, 0x02EE0F01, 0x00007D0D},
>> + {/*1562.500*/ 125.000, 0x02710F01, 0x0001F40C},
>> + {/*1462.500*/ 130.000, 0x02710E01, 0x0000FA0B},
>> + {/*1350.000*/ 135.000, 0x01F40D01, 0x0000000A},
>> + {/*1575.000*/ 140.000, 0x02EE0F01, 0x0000FA0B},
>> + {/*1450.000*/ 145.000, 0x01F40E01, 0x0000000A},
>> + {/*1575.000*/ 150.000, 0x02EE0F01, 0x0001F40A},
>> + {/*1550.000*/ 155.000, 0x01F40F01, 0x0000000A},
>> + {/*1600.000*/ 160.000, 0x00001001, 0x0000000A},
>> + {/*1237.500*/ 165.000, 0x01770C01, 0x0001F407},
>> + {/*1487.500*/ 170.000, 0x036B0E01, 0x0002EE08},
>> + {/*1575.000*/ 175.000, 0x02EE0F01, 0x00000009},
>> + {/*1575.000*/ 180.000, 0x02EE0F01, 0x0002EE08},
>> + {/*1387.500*/ 185.000, 0x036B0D01, 0x0001F407},
>> + {/*1425.000*/ 190.000, 0x00FA0E01, 0x0001F407},
>> + {/*1462.500*/ 195.000, 0x02710E01, 0x0001F407},
>> + {/*1600.000*/ 200.000, 0x00001001, 0x00000008},
>> + {/*1537.500*/ 205.000, 0x01770F01, 0x0001F407},
>> + {/*1575.000*/ 210.000, 0x02EE0F01, 0x0001F407},
>> + {/*1075.000*/ 215.000, 0x02EE0A01, 0x00000005},
>> + {/*1512.500*/ 220.000, 0x007D0F01, 0x00036B06},
>> + {/*1575.000*/ 225.000, 0x02EE0F01, 0x00000007},
>> + {/*1437.500*/ 230.000, 0x01770E01, 0x0000FA06},
>> + {/*1175.000*/ 235.000, 0x02EE0B01, 0x00000005},
>> + {/*1500.000*/ 240.000, 0x00000F01, 0x0000FA06},
>> + {/*1225.000*/ 245.000, 0x00FA0C01, 0x00000005},
>> + {/*1562.500*/ 250.000, 0x02710F01, 0x0000FA06},
>> + {/*1275.000*/ 255.000, 0x02EE0C01, 0x00000005},
>> + {/*1462.500*/ 260.000, 0x02710E01, 0x00027105},
>> + {/*1325.000*/ 265.000, 0x00FA0D01, 0x00000005},
>> + {/*1350.000*/ 270.000, 0x01F40D01, 0x00000005},
>> + {/*1512.500*/ 275.000, 0x007D0F01, 0x0001F405},
>> + {/*1575.000*/ 280.000, 0x02EE0F01, 0x00027105},
>> + {/*1425.000*/ 285.000, 0x00FA0E01, 0x00000005},
>> + {/*1450.000*/ 290.000, 0x01F40E01, 0x00000005},
>> + {/*1475.000*/ 295.000, 0x02EE0E01, 0x00000005},
>> + {/*1575.000*/ 300.000, 0x02EE0F01, 0x0000FA05},
>> + {/*1525.000*/ 305.000, 0x00FA0F01, 0x00000005},
>> + {/*1550.000*/ 310.000, 0x01F40F01, 0x00000005},
>> + {/*1575.000*/ 315.000, 0x02EE0F01, 0x00000005},
>> + {/*1600.000*/ 320.000, 0x00001001, 0x00000005},
>> + {/*1462.500*/ 325.000, 0x02710E01, 0x0001F404},
>> + {/*1237.500*/ 330.000, 0x01770C01, 0x0002EE03},
>> + {/*837.500*/ 335.000, 0x01770801, 0x0001F402},
>> + {/*1487.500*/ 340.000, 0x036B0E01, 0x00017704},
>> + {/*862.500*/ 345.000, 0x02710801, 0x0001F402},
>> + {/*1575.000*/ 350.000, 0x02EE0F01, 0x0001F404},
>> + {/*887.500*/ 355.000, 0x036B0801, 0x0001F402},
>> + {/*1575.000*/ 360.000, 0x02EE0F01, 0x00017704},
>> + {/*912.500*/ 365.000, 0x007D0901, 0x0001F402},
>> + {/*1387.500*/ 370.000, 0x036B0D01, 0x0002EE03},
>> + {/*1500.000*/ 375.000, 0x00000F01, 0x00000004},
>> + {/*1425.000*/ 380.000, 0x00FA0E01, 0x0002EE03},
>> + {/*962.500*/ 385.000, 0x02710901, 0x0001F402},
>> + {/*1462.500*/ 390.000, 0x02710E01, 0x0002EE03},
>> + {/*987.500*/ 395.000, 0x036B0901, 0x0001F402},
>> + {/*1600.000*/ 400.000, 0x00001001, 0x00000004},
>> + {/*1012.500*/ 405.000, 0x007D0A01, 0x0001F402},
>> + {/*1537.500*/ 410.000, 0x01770F01, 0x0002EE03},
>> + {/*1037.500*/ 415.000, 0x01770A01, 0x0001F402},
>> + {/*1575.000*/ 420.000, 0x02EE0F01, 0x0002EE03},
>> + {/*1487.500*/ 425.000, 0x036B0E01, 0x0001F403},
>> + {/*1075.000*/ 430.000, 0x02EE0A01, 0x0001F402},
>> + {/*1087.500*/ 435.000, 0x036B0A01, 0x0001F402},
>> + {/*1375.000*/ 440.000, 0x02EE0D01, 0x00007D03},
>> + {/*1112.500*/ 445.000, 0x007D0B01, 0x0001F402},
>> + {/*1575.000*/ 450.000, 0x02EE0F01, 0x0001F403},
>> + {/*1137.500*/ 455.000, 0x01770B01, 0x0001F402},
>> + {/*1437.500*/ 460.000, 0x01770E01, 0x00007D03},
>> + {/*1162.500*/ 465.000, 0x02710B01, 0x0001F402},
>> + {/*1175.000*/ 470.000, 0x02EE0B01, 0x0001F402},
>> + {/*1425.000*/ 475.000, 0x00FA0E01, 0x00000003},
>> + {/*1500.000*/ 480.000, 0x00000F01, 0x00007D03},
>> + {/*1212.500*/ 485.000, 0x007D0C01, 0x0001F402},
>> + {/*1225.000*/ 490.000, 0x00FA0C01, 0x0001F402},
>> + {/*1237.500*/ 495.000, 0x01770C01, 0x0001F402},
>> + {/*1562.500*/ 500.000, 0x02710F01, 0x00007D03},
>> + {/*1262.500*/ 505.000, 0x02710C01, 0x0001F402},
>> + {/*1275.000*/ 510.000, 0x02EE0C01, 0x0001F402},
>> + {/*1287.500*/ 515.000, 0x036B0C01, 0x0001F402},
>> + {/*1300.000*/ 520.000, 0x00000D01, 0x0001F402},
>> + {/*1575.000*/ 525.000, 0x02EE0F01, 0x00000003},
>> + {/*1325.000*/ 530.000, 0x00FA0D01, 0x0001F402},
>> + {/*1337.500*/ 535.000, 0x01770D01, 0x0001F402},
>> + {/*1350.000*/ 540.000, 0x01F40D01, 0x0001F402},
>> + {/*1362.500*/ 545.000, 0x02710D01, 0x0001F402},
>> + {/*1512.500*/ 550.000, 0x007D0F01, 0x0002EE02},
>> + {/*1387.500*/ 555.000, 0x036B0D01, 0x0001F402},
>> + {/*1400.000*/ 560.000, 0x00000E01, 0x0001F402},
>> + {/*1412.500*/ 565.000, 0x007D0E01, 0x0001F402},
>> + {/*1425.000*/ 570.000, 0x00FA0E01, 0x0001F402},
>> + {/*1437.500*/ 575.000, 0x01770E01, 0x0001F402},
>> + {/*1450.000*/ 580.000, 0x01F40E01, 0x0001F402},
>> + {/*1462.500*/ 585.000, 0x02710E01, 0x0001F402},
>> + {/*1475.000*/ 590.000, 0x02EE0E01, 0x0001F402},
>> + {/*1487.500*/ 595.000, 0x036B0E01, 0x0001F402},
>> + {/*1575.000*/ 600.000, 0x02EE0F01, 0x00027102},
>> + {/*1512.500*/ 605.000, 0x007D0F01, 0x0001F402},
>> + {/*1525.000*/ 610.000, 0x00FA0F01, 0x0001F402},
>> + {/*1537.500*/ 615.000, 0x01770F01, 0x0001F402},
>> + {/*1550.000*/ 620.000, 0x01F40F01, 0x0001F402},
>> + {/*1562.500*/ 625.000, 0x02710F01, 0x0001F402},
>> + {/*1575.000*/ 630.000, 0x02EE0F01, 0x0001F402},
>> + {/*1587.500*/ 635.000, 0x036B0F01, 0x0001F402},
>> + {/*1600.000*/ 640.000, 0x00001001, 0x0001F402},
>> + {/*1290.000*/ 645.000, 0x01F44005, 0x00000002},
>> + {/*1462.500*/ 650.000, 0x02710E01, 0x0000FA02}
>> +};
>> +
>> +static inline u32 reg_rd(struct clock *clock, u32 offset)
>> +{
>> + return ioread32(clock->clock_base + offset);
>> +}
>> +
>> +static inline void reg_wr(struct clock *clock, u32 val, u32 offset)
>> +{
>> + iowrite32(val, clock->clock_base + offset);
>> +}
>> +
>> +static u32 find_matching_freq_config(unsigned short freq,
>> + const struct xmgmt_ocl_clockwiz *table,
>> + int size)
>> +{
>> + u32 start = 0;
>> + u32 end = size - 1;
>> + u32 idx = size - 1;
> looks like you are doing a binary search, why not start idx at size / 2 ?
Will change.
>> +
>> + if (freq < table[0].ocl)
>> + return 0;
>> +
>> + if (freq > table[size - 1].ocl)
>> + return size - 1;
>> +
> What aren't these two conditions errors ?
If user specified the frequency out of scope, we will set to min/max
supported frequency.
>> + while (start < end) {
>> + if (freq == table[idx].ocl)
>> + break;
>> + if (freq < table[idx].ocl)
>> + end = idx;
>> + else
>> + start = idx + 1;
>> + idx = start + (end - start) / 2;
>> + }
>> + if (freq < table[idx].ocl)
>> + idx--;
>> +
>> + return idx;
>> +}
>> +
>> +static u32 find_matching_freq(u32 freq,
>> + const struct xmgmt_ocl_clockwiz *freq_table,
>> + int freq_table_size)
>> +{
>> + int idx = find_matching_freq_config(freq, freq_table, freq_table_size);
>> +
>> + return freq_table[idx].ocl;
>> +}
>> +
>> +static inline int clock_wiz_busy(struct clock *clock, int cycle, int interval)
>> +{
>> + u32 val = 0;
>> + int count;
>> +
>> + val = reg_rd(clock, OCL_CLKWIZ_STATUS_OFFSET);
>> + for (count = 0; val != 1 && count < cycle; count++) {
>> + mdelay(interval);
>> + val = reg_rd(clock, OCL_CLKWIZ_STATUS_OFFSET);
> if (val == 1)
>
> break;
>
> Is a bit easier to follow than putting another condition in the for()
Will change.
>
>> + }
>> + if (val != 1) {
>> + CLOCK_ERR(clock, "clockwiz is (%u) busy after %d ms",
>> + val, cycle * interval);
>> + return -ETIMEDOUT;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int get_freq(struct clock *clock, u16 *freq)
>> +{
>> +#define XCL_INPUT_FREQ 100
> ??
>
> If this a real parameter, it needs to go in the clock.h
Will remove this define.
>
>> + const u64 input = XCL_INPUT_FREQ;
>> + u32 val;
>> + u32 mul0, div0;
>> + u32 mul_frac0 = 0;
>> + u32 div1;
>> + u32 div_frac1 = 0;
>> +
>> + WARN_ON(!mutex_is_locked(&clock->clock_lock));
>> +
>> + val = reg_rd(clock, OCL_CLKWIZ_STATUS_OFFSET);
>> + if ((val & 0x1) == 0) {
>> + CLOCK_ERR(clock, "clockwiz is busy %x", val);
>> + *freq = 0;
>> + return -EBUSY;
>> + }
>> +
>> + val = reg_rd(clock, OCL_CLKWIZ_CONFIG_OFFSET(0));
> A general problem.
>
> The '0' is magic, convert this to a logically named #define or enum.
Will #define.
>
>> +
>> + div0 = val & 0xff;
>> + mul0 = (val & 0xff00) >> 8;
>> + if (val & BIT(26)) {
>> + mul_frac0 = val >> 16;
>> + mul_frac0 &= 0x3ff;
>> + }
>> +
>> + /*
>> + * Multiply both numerator (mul0) and the denominator (div0) with 1000
>> + * to account for fractional portion of multiplier
>> + */
>> + mul0 *= 1000;
>> + mul0 += mul_frac0;
>> + div0 *= 1000;
>> +
>> + val = reg_rd(clock, OCL_CLKWIZ_CONFIG_OFFSET(2));
>> +
>> + div1 = val & 0xff;
>> + if (val & BIT(18)) {
>> + div_frac1 = val >> 8;
>> + div_frac1 &= 0x3ff;
>> + }
>> +
>> + /*
>> + * Multiply both numerator (mul0) and the denominator (div1) with
>> + * 1000 to account for fractional portion of divider
>> + */
>> +
>> + div1 *= 1000;
>> + div1 += div_frac1;
>> + div0 *= div1;
>> + mul0 *= 1000;
>> + if (div0 == 0) {
>> + CLOCK_ERR(clock, "clockwiz 0 divider");
>> + return 0;
>> + }
>> +
>> + *freq = (u16)((input * mul0) / div0);
>> +
>> + return 0;
>> +}
>> +
>> +static int set_freq(struct clock *clock, u16 freq)
>> +{
>> + u32 config;
>> + int err;
>> + u32 idx = 0;
>> + u32 val;
>> +
>> + WARN_ON(!mutex_is_locked(&clock->clock_lock));
>> +
>> + idx = find_matching_freq_config(freq, frequency_table,
>> + ARRAY_SIZE(frequency_table));
>> +
>> + CLOCK_INFO(clock, "New: %d Mhz", freq);
>> + err = clock_wiz_busy(clock, 20, 50);
>> + if (err)
>> + return -EBUSY;
>> +
>> + config = frequency_table[idx].config0;
>> + reg_wr(clock, config, OCL_CLKWIZ_CONFIG_OFFSET(0));
>> +
>> + config = frequency_table[idx].config2;
>> + reg_wr(clock, config, OCL_CLKWIZ_CONFIG_OFFSET(2));
>> +
>> + mdelay(10);
>> + reg_wr(clock, 7, OCL_CLKWIZ_CONFIG_OFFSET(23));
>> +
>> + mdelay(1);
>> + reg_wr(clock, 2, OCL_CLKWIZ_CONFIG_OFFSET(23));
>> +
>> + CLOCK_INFO(clock, "clockwiz waiting for locked signal");
>> +
>> + err = clock_wiz_busy(clock, 100, 100);
>> + if (err) {
>> + CLOCK_ERR(clock, "clockwiz MMCM/PLL did not lock");
>> + /* restore */
>> + reg_wr(clock, 4, OCL_CLKWIZ_CONFIG_OFFSET(23));
>> + mdelay(10);
>> + reg_wr(clock, 0, OCL_CLKWIZ_CONFIG_OFFSET(23));
>> + return err;
>> + }
>> + val = reg_rd(clock, OCL_CLKWIZ_CONFIG_OFFSET(0));
>> + CLOCK_INFO(clock, "clockwiz CONFIG(0) 0x%x", val);
>> + val = reg_rd(clock, OCL_CLKWIZ_CONFIG_OFFSET(2));
>> + CLOCK_INFO(clock, "clockwiz CONFIG(2) 0x%x", val);
>> +
>> + return 0;
>> +}
>> +
>> +static int get_freq_counter(struct clock *clock, u32 *freq)
>> +{
>> + const void *cnter;
> variable name should be easy to read, use 'counter'
Will fix.
>> + struct platform_device *cnter_leaf;
>> + struct platform_device *pdev = clock->pdev;
>> + struct xrt_subdev_platdata *pdata = DEV_PDATA(clock->pdev);
>> + int err = xrt_md_get_prop(DEV(pdev), pdata->xsp_dtb,
>> + clock->clock_ep_name, NULL, XRT_MD_PROP_CLK_CNT, &cnter, NULL);
>> +
>> + WARN_ON(!mutex_is_locked(&clock->clock_lock));
>> +
>> + if (err) {
>> + xrt_err(pdev, "no counter specified");
>> + return err;
>> + }
>> +
>> + cnter_leaf = xleaf_get_leaf_by_epname(pdev, cnter);
>> + if (!cnter_leaf) {
>> + xrt_err(pdev, "can't find counter");
>> + return -ENOENT;
>> + }
>> +
>> + err = xleaf_ioctl(cnter_leaf, XRT_CLKFREQ_READ, freq);
>> + if (err)
>> + xrt_err(pdev, "can't read counter");
>> + xleaf_put_leaf(clock->pdev, cnter_leaf);
>> +
>> + return err;
>> +}
>> +
>> +static int clock_get_freq(struct clock *clock, u16 *freq, u32 *freq_cnter)
>> +{
>> + int err = 0;
>> +
>> + mutex_lock(&clock->clock_lock);
>> +
>> + if (err == 0 && freq)
>> + err = get_freq(clock, freq);
>> +
>> + if (err == 0 && freq_cnter)
>> + err = get_freq_counter(clock, freq_cnter);
>> +
>> + mutex_unlock(&clock->clock_lock);
>> + return err;
>> +}
>> +
>> +static int clock_set_freq(struct clock *clock, u16 freq)
>> +{
>> + int err;
> Why is this function needed ?
>
> Move the locking into set_freq.
Sure.
>
>> +
>> + mutex_lock(&clock->clock_lock);
>> + err = set_freq(clock, freq);
>> + mutex_unlock(&clock->clock_lock);
>> +
>> + return err;
>> +}
>> +
>> +static int clock_verify_freq(struct clock *clock)
>> +{
>> + int err = 0;
>> + u16 freq;
>> + u32 lookup_freq, clock_freq_counter, request_in_khz, tolerance;
>> +
>> + mutex_lock(&clock->clock_lock);
>> +
>> + err = get_freq(clock, &freq);
>> + if (err) {
>> + xrt_err(clock->pdev, "get freq failed, %d", err);
>> + goto end;
>> + }
>> +
>> + err = get_freq_counter(clock, &clock_freq_counter);
>> + if (err) {
>> + xrt_err(clock->pdev, "get freq counter failed, %d", err);
>> + goto end;
>> + }
>> +
>> + lookup_freq = find_matching_freq(freq, frequency_table,
>> + ARRAY_SIZE(frequency_table));
>> + request_in_khz = lookup_freq * 1000;
>> + tolerance = lookup_freq * 50;
>> + if (tolerance < abs(clock_freq_counter - request_in_khz)) {
>> + CLOCK_ERR(clock,
>> + "set clock(%s) failed, request %ukhz, actual %dkhz",
>> + clock->clock_ep_name, request_in_khz, clock_freq_counter);
>> + err = -EDOM;
>> + } else {
>> + CLOCK_INFO(clock, "verified clock (%s)", clock->clock_ep_name);
>> + }
>> +
>> +end:
>> + mutex_unlock(&clock->clock_lock);
>> + return err;
>> +}
>> +
>> +static int clock_init(struct clock *clock)
>> +{
>> + struct xrt_subdev_platdata *pdata = DEV_PDATA(clock->pdev);
>> + int err = 0;
>> + const u16 *freq;
>> +
>> + err = xrt_md_get_prop(DEV(clock->pdev), pdata->xsp_dtb,
>> + clock->clock_ep_name, NULL, XRT_MD_PROP_CLK_FREQ,
>> + (const void **)&freq, NULL);
>> + if (err) {
>> + xrt_info(clock->pdev, "no default freq");
>> + return 0;
>> + }
>> +
>> + mutex_lock(&clock->clock_lock);
>> + err = set_freq(clock, be16_to_cpu(*freq));
>> + mutex_unlock(&clock->clock_lock);
>> +
>> + return err;
>> +}
>> +
>> +static ssize_t freq_show(struct device *dev, struct device_attribute *attr, char *buf)
>> +{
>> + struct clock *clock = platform_get_drvdata(to_platform_device(dev));
>> + u16 freq = 0;
>> + ssize_t count;
>> +
>> + count = clock_get_freq(clock, &freq, NULL);
>> + if (count < 0)
>> + return count;
>> +
>> + count = snprintf(buf, 64, "%d\n", freq);
> %u ?
Sure.
Thanks,
Lizhi
>
> Tom
>
>> +
>> + return count;
>> +}
>> +static DEVICE_ATTR_RO(freq);
>> +
>> +static struct attribute *clock_attrs[] = {
>> + &dev_attr_freq.attr,
>> + NULL,
>> +};
>> +
>> +static struct attribute_group clock_attr_group = {
>> + .attrs = clock_attrs,
>> +};
>> +
>> +static int
>> +xrt_clock_leaf_ioctl(struct platform_device *pdev, u32 cmd, void *arg)
>> +{
>> + struct clock *clock;
>> + int ret = 0;
>> +
>> + clock = platform_get_drvdata(pdev);
>> +
>> + switch (cmd) {
>> + case XRT_XLEAF_EVENT:
>> + /* Does not handle any event. */
>> + break;
>> + case XRT_CLOCK_SET: {
>> + u16 freq = (u16)(uintptr_t)arg;
>> +
>> + ret = clock_set_freq(clock, freq);
>> + break;
>> + }
>> + case XRT_CLOCK_VERIFY: {
>> + ret = clock_verify_freq(clock);
>> + break;
>> + }
>> + case XRT_CLOCK_GET: {
>> + struct xrt_clock_ioctl_get *get =
>> + (struct xrt_clock_ioctl_get *)arg;
>> +
>> + ret = clock_get_freq(clock, &get->freq, &get->freq_cnter);
>> + break;
>> + }
>> + default:
>> + xrt_err(pdev, "unsupported cmd %d", cmd);
>> + return -EINVAL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int clock_remove(struct platform_device *pdev)
>> +{
>> + struct clock *clock;
>> +
>> + clock = platform_get_drvdata(pdev);
>> + if (!clock) {
>> + xrt_err(pdev, "driver data is NULL");
>> + return -EINVAL;
>> + }
>> +
>> + platform_set_drvdata(pdev, NULL);
>> + devm_kfree(&pdev->dev, clock);
>> +
>> + CLOCK_INFO(clock, "successfully removed Clock subdev");
>> + return 0;
>> +}
>> +
>> +static int clock_probe(struct platform_device *pdev)
>> +{
>> + struct clock *clock = NULL;
>> + struct resource *res;
>> + int ret;
>> +
>> + clock = devm_kzalloc(&pdev->dev, sizeof(*clock), GFP_KERNEL);
>> + if (!clock)
>> + return -ENOMEM;
>> +
>> + platform_set_drvdata(pdev, clock);
>> + clock->pdev = pdev;
>> + mutex_init(&clock->clock_lock);
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + clock->clock_base = ioremap(res->start, res->end - res->start + 1);
>> + if (!clock->clock_base) {
>> + CLOCK_ERR(clock, "map base %pR failed", res);
>> + ret = -EFAULT;
>> + goto failed;
>> + }
>> +
>> + clock->clock_ep_name = res->name;
>> +
>> + ret = clock_init(clock);
>> + if (ret)
>> + goto failed;
>> +
>> + ret = sysfs_create_group(&pdev->dev.kobj, &clock_attr_group);
>> + if (ret) {
>> + CLOCK_ERR(clock, "create clock attrs failed: %d", ret);
>> + goto failed;
>> + }
>> +
>> + CLOCK_INFO(clock, "successfully initialized Clock subdev");
>> +
>> + return 0;
>> +
>> +failed:
>> + clock_remove(pdev);
>> + return ret;
>> +}
>> +
>> +static struct xrt_subdev_endpoints xrt_clock_endpoints[] = {
>> + {
>> + .xse_names = (struct xrt_subdev_ep_names[]) {
>> + { .regmap_name = "clkwiz" },
>> + { NULL },
>> + },
>> + .xse_min_ep = 1,
>> + },
>> + { 0 },
>> +};
>> +
>> +static struct xrt_subdev_drvdata xrt_clock_data = {
>> + .xsd_dev_ops = {
>> + .xsd_ioctl = xrt_clock_leaf_ioctl,
>> + },
>> +};
>> +
>> +static const struct platform_device_id xrt_clock_table[] = {
>> + { XRT_CLOCK, (kernel_ulong_t)&xrt_clock_data },
>> + { },
>> +};
>> +
>> +static struct platform_driver xrt_clock_driver = {
>> + .driver = {
>> + .name = XRT_CLOCK,
>> + },
>> + .probe = clock_probe,
>> + .remove = clock_remove,
>> + .id_table = xrt_clock_table,
>> +};
>> +
>> +void clock_leaf_init_fini(bool init)
>> +{
>> + if (init)
>> + xleaf_register_driver(XRT_SUBDEV_CLOCK, &xrt_clock_driver, xrt_clock_endpoints);
>> + else
>> + xleaf_unregister_driver(XRT_SUBDEV_CLOCK);
>> +}
Powered by blists - more mailing lists