[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <d2b2a4fab56ca6276fbdca8e75b3e28d5cda859c.1615454845.git.matti.vaittinen@fi.rohmeurope.com>
Date: Thu, 11 Mar 2021 12:22:11 +0200
From: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
To: matti.vaittinen@...rohmeurope.com, mazziesaccount@...il.com
Cc: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Matti Vaittinen <matti.vaittinen@...rohmeurope.com>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-power@...rohmeurope.com, linux-arm-msm@...r.kernel.org,
linux-renesas-soc@...r.kernel.org
Subject: [RFC PATCH v3 2/7] regulator: add warning flags
Add 'warning' level events and error flags to regulator core.
Current regulator core notifications are used to inform consumers
about errors where HW is misbehaving in such way it is assumed to
be broken/unrecoverable.
There are PMICs which are designed for system(s) that may have use
for regulator indications sent before HW is damaged so that some
board/consumer specific recovery-event can be performed while
continuing most of the normal operations.
Add new WARNING level events and notifications to be used for
that purpose.
Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
---
v3:
No changes
v2:
No changes
include/linux/regulator/consumer.h | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 20e84a84fb77..f72ca73631be 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -119,6 +119,16 @@ struct regulator_dev;
#define REGULATOR_EVENT_PRE_DISABLE 0x400
#define REGULATOR_EVENT_ABORT_DISABLE 0x800
#define REGULATOR_EVENT_ENABLE 0x1000
+/*
+ * Following notifications should be emitted only if detected condition
+ * is such that the HW is likely to still be working but consumers should
+ * take a recovery action to prevent problems esacalating into errors.
+ */
+#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN 0x2000
+#define REGULATOR_EVENT_OVER_CURRENT_WARN 0x4000
+#define REGULATOR_EVENT_OVER_VOLTAGE_WARN 0x8000
+#define REGULATOR_EVENT_OVER_TEMP_WARN 0x10000
+#define REGULATOR_EVENT_WARN_MASK 0x1E000
/*
* Regulator errors that can be queried using regulator_get_error_flags
@@ -138,6 +148,10 @@ struct regulator_dev;
#define REGULATOR_ERROR_FAIL BIT(4)
#define REGULATOR_ERROR_OVER_TEMP BIT(5)
+#define REGULATOR_ERROR_UNDER_VOLTAGE_WARN BIT(6)
+#define REGULATOR_ERROR_OVER_CURRENT_WARN BIT(7)
+#define REGULATOR_ERROR_OVER_VOLTAGE_WARN BIT(8)
+#define REGULATOR_ERROR_OVER_TEMP_WARN BIT(9)
/**
* struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event
--
2.25.4
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
Powered by blists - more mailing lists