[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5f66f43e-8b50-39f2-f326-07a9378c0909@linaro.org>
Date: Thu, 11 Mar 2021 12:58:58 +0100
From: Daniel Lezcano <daniel.lezcano@...aro.org>
To: Johan Jonker <jbx6244@...il.com>, heiko@...ech.de
Cc: linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, Lin Huang <hl@...k-chips.com>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
Gaël PORTAY <gael.portay@...labora.com>,
Rob Herring <robh+dt@...nel.org>,
Helen Koike <helen.koike@...labora.com>,
Chen-Yu Tsai <wens@...e.org>,
Jacob Chen <jacob2.chen@...k-chips.com>,
Shunqian Zheng <zhengsq@...k-chips.com>,
Robin Murphy <robin.murphy@....com>,
Boris Brezillon <boris.brezillon@...labora.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [RESEND PATCH v5 2/4] arm64: dts: rk3399: Add dfi and dmc nodes.
On 09/03/2021 12:42, Johan Jonker wrote:
> Hi Daniel,
>
> Some comments. Have a look if it's useful or that you disagree with.
>
> New nodes should be verifiable if possible.
> Especially with so many properties.
> Could you convert rockchip-dfi.txt and rk3399_dmc.txt to yaml instead of
> changing old txt documents?
> Add rockchip-dfi.yaml and rk3399_dmc.yaml before this patch in version 6.
I don't have a lot of bandwidth to do it but I will give a try.
Thanks for reviewing
-- Daniel
> Nodes and properties have a sort order. Please fix.
> Some goes for [RESEND PATCH v5 3/4].
>
> (This is a generic dtsi. How about cooling and dmc ??)
>
> ----
> Heiko rules:
>
> compatible
> reg
> interrupts
> [alphabetical]
> status [if needed]
>
> ----
> My incomplete list:
>
> For nodes:
> If exists on top: model, compatible and chosen.
> Sort things without reg alphabetical first,
> then sort the rest by reg address.
>
> Inside nodes:
> If exists on top: compatible, reg and interrupts.
> In alphabetical order the required properties.
> Then in alphabetical order the other properties.
> And as last things that start with '#' in alphabetical order.
> Add status below all other properties for soc internal components with
> any board-specifics.
> Keep an empty line between properties and nodes.
>
> Exceptions:
> Sort pinctrl-0 above pinctrl-names, so it stays in line with clock-names
> and dma-names.
> Sort simple-audio-card,name above other simple-audio-card properties.
> Sort regulator-name above other regulator properties.
> Sort regulator-min-microvolt above regulator-max-microvolt.
>
> On 3/9/21 12:38 AM, Daniel Lezcano wrote:
>> From: Lin Huang <hl@...k-chips.com>
>>
>> These are required to support DDR DVFS on rk3399 platform.
>>
>> Signed-off-by: Lin Huang <hl@...k-chips.com>
>> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
>> Signed-off-by: Gaël PORTAY <gael.portay@...labora.com>
>> Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
>> ---
>> arch/arm64/boot/dts/rockchip/rk3399.dtsi | 19 +++++++++++++++++++
>> 1 file changed, 19 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> index edbbf35fe19e..6f23d99236fe 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi
>> @@ -1937,6 +1937,25 @@
>> status = "disabled";
>> };
>>
>> + dfi: dfi@...30000 {
>> + reg = <0x00 0xff630000 0x00 0x4000>;
>> + compatible = "rockchip,rk3399-dfi";
>> + rockchip,pmu = <&pmugrf>;
>> + interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
>> + clocks = <&cru PCLK_DDR_MON>;
>> + clock-names = "pclk_ddr_mon";
>> + status = "disabled";
>> + };
>> +
>> + dmc: dmc {
>> + compatible = "rockchip,rk3399-dmc";
>> + rockchip,pmu = <&pmugrf>;
>> + devfreq-events = <&dfi>;
>> + clocks = <&cru SCLK_DDRC>;
>> + clock-names = "dmc_clk";
>> + status = "disabled";
>> + };
>> +
>> pinctrl: pinctrl {
>> compatible = "rockchip,rk3399-pinctrl";
>> rockchip,grf = <&grf>;
>>
>
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
Powered by blists - more mailing lists