| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <34c61597-a90b-5d90-f9fb-4ede3ece3b4c@canonical.com>
Date: Thu, 11 Mar 2021 14:03:30 +0000
From: Colin Ian King <colin.king@...onical.com>
To: Michal Simek <michal.simek@...inx.com>
Cc: Linus Walleij <linus.walleij@...aro.org>,
"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: pinctrl: core: Handling pinmux and pinconf separately
On 11/03/2021 11:28, Michal Simek wrote:
>
>
> On 3/11/21 12:24 PM, Colin Ian King wrote:
>> On 11/03/2021 11:16, Michal Simek wrote:
>>>
>>>
>>> On 3/11/21 11:57 AM, Colin Ian King wrote:
>>>> Hi,
>>>>
>>>> Static analysis on linux-next with Coverity has found a potential issue
>>>> in drivers/pinctrl/core.c with the following commit:
>>>>
>>>> commit 0952b7ec1614abf232e921aac0cc2bca8e60e162
>>>> Author: Michal Simek <michal.simek@...inx.com>
>>>> Date: Wed Mar 10 09:16:54 2021 +0100
>>>>
>>>> pinctrl: core: Handling pinmux and pinconf separately
>>>>
>>>> The analysis is as follows:
>>>>
>>>> 1234 /**
>>>> 1235 * pinctrl_commit_state() - select/activate/program a pinctrl state
>>>> to HW
>>>> 1236 * @p: the pinctrl handle for the device that requests configuration
>>>> 1237 * @state: the state handle to select/activate/program
>>>> 1238 */
>>>> 1239 static int pinctrl_commit_state(struct pinctrl *p, struct
>>>> pinctrl_state *state)
>>>> 1240 {
>>>> 1241 struct pinctrl_setting *setting, *setting2;
>>>> 1242 struct pinctrl_state *old_state = p->state;
>>>>
>>>> 1. var_decl: Declaring variable ret without initializer.
>>>>
>>>> 1243 int ret;
>>>> 1244
>>>>
>>>> 2. Condition p->state, taking true branch.
>>>>
>>>> 1245 if (p->state) {
>>>> 1246 /*
>>>> 1247 * For each pinmux setting in the old state, forget
>>>> SW's record
>>>> 1248 * of mux owner for that pingroup. Any pingroups
>>>> which are
>>>> 1249 * still owned by the new state will be re-acquired
>>>> by the call
>>>> 1250 * to pinmux_enable_setting() in the loop below.
>>>> 1251 */
>>>>
>>>> 3. Condition 0 /* !!(!__builtin_types_compatible_p() &&
>>>> !__builtin_types_compatible_p()) */, taking false branch.
>>>> 4. Condition !(&setting->node == &p->state->settings), taking true
>>>> branch.
>>>> 7. Condition 0 /* !!(!__builtin_types_compatible_p() &&
>>>> !__builtin_types_compatible_p()) */, taking false branch.
>>>> 8. Condition !(&setting->node == &p->state->settings), taking true
>>>> branch.
>>>> 11. Condition 0 /* !!(!__builtin_types_compatible_p() &&
>>>> !__builtin_types_compatible_p()) */, taking false branch.
>>>> 12. Condition !(&setting->node == &p->state->settings), taking false
>>>> branch.
>>>>
>>>> 1252 list_for_each_entry(setting, &p->state->settings,
>>>> node) {
>>>>
>>>> 5. Condition setting->type != PIN_MAP_TYPE_MUX_GROUP, taking true
>>>> branch.
>>>> 9. Condition setting->type != PIN_MAP_TYPE_MUX_GROUP, taking true
>>>> branch.
>>>> 1253 if (setting->type != PIN_MAP_TYPE_MUX_GROUP)
>>>> 6. Continuing loop.
>>>> 10. Continuing loop.
>>>>
>>>> 1254 continue;
>>>> 1255 pinmux_disable_setting(setting);
>>>> 1256 }
>>>> 1257 }
>>>> 1258
>>>> 1259 p->state = NULL;
>>>> 1260
>>>> 1261 /* Apply all the settings for the new state - pinmux first */
>>>>
>>>> 13. Condition 0 /* !!(!__builtin_types_compatible_p() &&
>>>> !__builtin_types_compatible_p()) */, taking false branch.
>>>> 14. Condition !(&setting->node == &state->settings), taking true branch.
>>>> 1262 list_for_each_entry(setting, &state->settings, node) {
>>>> 15. Switch case value PIN_MAP_TYPE_CONFIGS_PIN.
>>>>
>>>> 1263 switch (setting->type) {
>>>> 1264 case PIN_MAP_TYPE_MUX_GROUP:
>>>> 1265 ret = pinmux_enable_setting(setting);
>>>> 1266 break;
>>>> 1267 case PIN_MAP_TYPE_CONFIGS_PIN:
>>>> 1268 case PIN_MAP_TYPE_CONFIGS_GROUP:
>>>>
>>>> 16. Breaking from switch.
>>>>
>>>> 1269 break;
>>>> 1270 default:
>>>> 1271 ret = -EINVAL;
>>>> 1272 break;
>>>> 1273 }
>>>> 1274
>>>>
>>>> Uninitialized scalar variable (UNINIT)
>>>> 17. uninit_use: Using uninitialized value ret.
>>>>
>>>> 1275 if (ret < 0)
>>>> 1276 goto unapply_new_state;
>>>>
>>>> For the PIN_MAP_TYPE_CONFIGS_PIN and PIN_MAP_TYPE_CONFIGS_GROUP
>>>> setting->type cases the loop can break out with ret not being set. Since
>>>> ret has not been initialized it the ret < 0 check is checking against an
>>>> uninitialized value.
>>>>
>>>> I was not sure if the PIN_MAP_TYPE_CONFIGS_PIN and
>>>> PIN_MAP_TYPE_CONFIGS_GROUP cases should be setting ret and if so, what
>>>> the value of ret should be set to (is it an error condition or not?). Or
>>>> should ret be initialized to 0 or a default error value at the start of
>>>> the function.
>>>>
>>>> Hence I'm reporting this issue.
>>>
>>> What about this? Is this passing static analysis?
>>
>> It will take me 2 hours to re-run the analysis, but from eyeballing the
>> code I think the assignments will fix this.
>
> would be good if you can rerun it and get back to us on this.
> I will wait if something else will pop up and then will send v2 with
> this that Linus can apply this one instead.
Yep, passed, fixes the issue found by Coverity.
>
> Thanks,
> Michal
>
>
>
Powered by blists - more mailing lists