linux-kernel - Re: linux-next: build warning after merge of the hwmon-staging tree

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 12 Mar 2021 04:00:45 +0000
From:   Chris Packham <Chris.Packham@...iedtelesis.co.nz>
To:     Stephen Rothwell <sfr@...b.auug.org.au>,
        Guenter Roeck <linux@...ck-us.net>
CC:     Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        "Linux Next Mailing List" <linux-next@...r.kernel.org>
Subject: Re: linux-next: build warning after merge of the hwmon-staging tree


On 12/03/21 4:50 pm, Stephen Rothwell wrote:
> Hi all,
>
> After merging the hwmon-staging tree, today's linux-next build (htmldocs)
> produced this warning:
>
> Documentation/hwmon/ir36021.rst:34: WARNING: Malformed table.
> No bottom table border found.
>
> ======================= ===========================
> curr1_label             "iin"
> curr1_input             Measured input current
> curr1_alarm             Input fault alarm
>
> curr2_label             "iout1"
> curr2_input             Measured output current
> curr2_alarm             Output over-current alarm
>
> in1_label               "vin"
> in1_input               Measured input voltage
> in1_alarm               Input under-voltage alarm
>
> in2_label               "vout1"
> in2_input               Measured output voltage
> in2_alarm               Output over-voltage alarm
>
> power1_label            "pin"
> power1_input            Measured input power
> power1_alarm            Input under-voltage alarm
>
> power2_label            "pout1"
> power2_input            Measured output power
>
> temp1_input             Measured temperature
> temp1_alarm             Temperature alarm
>
> temp2_input             Measured other loop temperature
> temp2_alarm             Temperature alarm
>
> Caused by commit
>
>    0be9fee30ff9 ("hwmon: (pmbus) Add driver for Infineon IR36021")
>
Easy enough to fix. Who should I send the patch to?