| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210312213302.GA2291310@bjorn-Precision-5520>
Date: Fri, 12 Mar 2021 15:33:02 -0600
From: Bjorn Helgaas <helgaas@...nel.org>
To: sathyanarayanan.kuppuswamy@...ux.intel.com
Cc: bhelgaas@...gle.com, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, ashok.raj@...el.com,
dan.j.williams@...el.com, keith.busch@...el.com,
knsathya@...nel.org, Lukas Wunner <lukas@...ner.de>
Subject: Re: [PATCH v1 1/1] PCI: pciehp: Skip DLLSC handling if DPC is
triggered
[+cc Lukas, pciehp expert]
On Mon, Mar 08, 2021 at 10:34:10PM -0800, sathyanarayanan.kuppuswamy@...ux.intel.com wrote:
> From: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>
>
> When hotplug and DPC are both enabled on a Root port or
> Downstream Port, during DPC events that cause a DLLSC link
> down/up events, such events must be suppressed to let the DPC
> driver own the recovery path.
I first thought you were saying "during DPC events, DPC events must be
suppressed" which would be nonsensical. But I guess this is saying
the "*link down/up* events must be suppressed"?
> When DPC is present and enabled, hardware will put the port in
> containment state to allow SW to recover from the error condition
> in the seamless manner. But, during the DPC error recovery process,
> since the link is in disabled state, it will also raise the DLLSC
> event. In Linux kernel architecture, DPC events are handled by DPC
> driver and DLLSC events are handled by hotplug driver. If a hotplug
> driver is allowed to handle such DLLSC event (triggered by DPC
> containment), then we will have a race condition between error
> recovery handler (in DPC driver) and hotplug handler in recovering
> the contained port. Allowing such a race leads to a lot of stability
> issues while recovering the device. So skip DLLSC handling in the
> hotplug driver when the PCIe port associated with the hotplug event is
> in DPC triggered state and let the DPC driver be responsible for the
> port recovery.
>
> Following is the sample dmesg log which shows the contention
> between hotplug handler and error recovery handler. In this
> case, hotplug handler won the race and error recovery
> handler reported failure.
>
> [ 724.974237] pcieport 0000:97:02.0: pciehp: Slot(4): Link Down
> [ 724.974266] pcieport 0000:97:02.0: DPC: containment event, status:0x1f01 source:0x0000
> [ 724.974269] pcieport 0000:97:02.0: DPC: unmasked uncorrectable error detected
> [ 724.974275] pcieport 0000:97:02.0: PCIe Bus Error: severity=Uncorrected (Non-Fatal), type=Transaction Layer, (Requester ID)
> [ 724.974283] pcieport 0000:97:02.0: device [8086:347a] error status/mask=00004000/00100020
> [ 724.974288] pcieport 0000:97:02.0: [14] CmpltTO (First)
> [ 724.999181] pci 0000:98:00.0: AER: can't recover (no error_detected callback)
> [ 724.999227] pci 0000:98:00.0: Removing from iommu group 181
> [ 726.063125] pcieport 0000:97:02.0: pciehp: Slot(4): Card present
> [ 726.221117] pcieport 0000:97:02.0: DPC: Data Link Layer Link Active not set in 1000 msec
> [ 726.221122] pcieport 0000:97:02.0: AER: subordinate device reset failed
> [ 726.221162] pcieport 0000:97:02.0: AER: device recovery failed
> [ 727.227176] pci 0000:98:00.0: [8086:0953] type 00 class 0x010802
> [ 727.227202] pci 0000:98:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
> [ 727.227234] pci 0000:98:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
> [ 727.227246] pci 0000:98:00.0: Max Payload Size set to 256 (was 128, max 256)
> [ 727.227251] pci 0000:98:00.0: enabling Extended Tags
> [ 727.227736] pci 0000:98:00.0: Adding to iommu group 181
> [ 727.231150] pci 0000:98:00.0: BAR 6: assigned [mem 0xd1000000-0xd100ffff pref]
> [ 727.231156] pci 0000:98:00.0: BAR 0: assigned [mem 0xd1010000-0xd1013fff 64bit]
> [ 727.231170] pcieport 0000:97:02.0: PCI bridge to [bus 98]
> [ 727.231174] pcieport 0000:97:02.0: bridge window [io 0xc000-0xcfff]
> [ 727.231181] pcieport 0000:97:02.0: bridge window [mem 0xd1000000-0xd10fffff]
> [ 727.231186] pcieport 0000:97:02.0: bridge window [mem 0x206000000000-0x2060001fffff 64bit pref]
> [ 727.231555] nvme nvme1: pci function 0000:98:00.0
> [ 727.231581] nvme 0000:98:00.0: enabling device (0140 -> 0142)
> [ 737.141132] nvme nvme1: 31/0/0 default/read/poll queues
> [ 737.146211] nvme1n2: p1
Quite a bit of the above really isn't relevant to the problem, so
stripping it out would reduce distraction. E.g.,
Removing from iommu group
reg ...
Max Payload Size set
enabling Extended Tags
Adding to iommu group
BAR X: assigned ...
PCI bridge to [bus 98]
bridge window ...
Probably the timestamps are also only of incidental interest and could
be removed?
> Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@...ux.intel.com>
> Reviewed-by: Dan Williams <dan.j.williams@...el.com>
> Reviewed-by: Raj Ashok <ashok.raj@...el.com>
> ---
> drivers/pci/hotplug/pciehp_hpc.c | 18 +++++++++++++++++
> drivers/pci/pci.h | 2 ++
> drivers/pci/pcie/dpc.c | 33 ++++++++++++++++++++++++++++++--
> include/linux/pci.h | 1 +
> 4 files changed, 52 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
> index fb3840e222ad..8e7916abc60e 100644
> --- a/drivers/pci/hotplug/pciehp_hpc.c
> +++ b/drivers/pci/hotplug/pciehp_hpc.c
> @@ -691,6 +691,24 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id)
> goto out;
> }
>
> + /*
> + * If the DLLSC link up/down event is generated due to DPC containment
> + * in the PCIe port, skip the DLLSC event handling and let the DPC driver
> + * own the port recovery. Allowing both hotplug DLLSC event handler and DPC
> + * event trigger handler attempt recovery on the same port leads to stability
> + * issues. if DPC recovery is successful, is_dpc_reset_active() will return
> + * false and the hotplug handler will not suppress the DLLSC event. If DPC
> + * recovery fails and the link is left in disabled state, once the user
> + * changes the faulty card, the hotplug handler can still handle the PRESENCE
> + * change event and bring the device back up.
Please wrap the above so it fits in 80 columns.
s/trigger handler attempt recovery/trigger handler to attempt recovery/
s/issues. if/issues. If/
> + */
> + if ((events == PCI_EXP_SLTSTA_DLLSC) && is_dpc_reset_active(pdev)) {
> + ctrl_info(ctrl, "Slot(%s): DLLSC event(DPC), skipped\n",
> + slot_name(ctrl));
> + ret = IRQ_HANDLED;
> + goto out;
> + }
> +
> /* Check Attention Button Pressed */
> if (events & PCI_EXP_SLTSTA_ABP) {
> ctrl_info(ctrl, "Slot(%s): Attention button pressed\n",
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index ef7c4661314f..cee7095483bd 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -446,10 +446,12 @@ void pci_restore_dpc_state(struct pci_dev *dev);
> void pci_dpc_init(struct pci_dev *pdev);
> void dpc_process_error(struct pci_dev *pdev);
> pci_ers_result_t dpc_reset_link(struct pci_dev *pdev);
> +bool is_dpc_reset_active(struct pci_dev *pdev);
> #else
> static inline void pci_save_dpc_state(struct pci_dev *dev) {}
> static inline void pci_restore_dpc_state(struct pci_dev *dev) {}
> static inline void pci_dpc_init(struct pci_dev *pdev) {}
> +static inline bool is_dpc_reset_active(struct pci_dev *pdev) { return false; }
> #endif
>
> #ifdef CONFIG_PCIEPORTBUS
> diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
> index e05aba86a317..ad51109921af 100644
> --- a/drivers/pci/pcie/dpc.c
> +++ b/drivers/pci/pcie/dpc.c
> @@ -71,6 +71,30 @@ void pci_restore_dpc_state(struct pci_dev *dev)
> pci_write_config_word(dev, dev->dpc_cap + PCI_EXP_DPC_CTL, *cap);
> }
>
> +bool is_dpc_reset_active(struct pci_dev *dev)
> +{
> + struct pci_host_bridge *host = pci_find_host_bridge(dev->bus);
> + u16 status;
> +
> + if (!dev->dpc_cap)
> + return false;
> +
> + /*
> + * If DPC is owned by firmware and EDR is not supported, there is
> + * no race between hotplug and DPC recovery handler. So return
> + * false.
> + */
> + if (!host->native_dpc && !IS_ENABLED(CONFIG_PCIE_EDR))
> + return false;
> +
> + if (atomic_read_acquire(&dev->dpc_reset_active))
> + return true;
> +
> + pci_read_config_word(dev, dev->dpc_cap + PCI_EXP_DPC_STATUS, &status);
> +
> + return !!(status & PCI_EXP_DPC_STATUS_TRIGGER);
I know it's somewhat common in drivers/pci/, but I'm not really a
big fan of "!!".
> +}
> +
> static int dpc_wait_rp_inactive(struct pci_dev *pdev)
> {
> unsigned long timeout = jiffies + HZ;
> @@ -91,6 +115,7 @@ static int dpc_wait_rp_inactive(struct pci_dev *pdev)
>
> pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
> {
> + pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
> u16 cap;
>
> /*
> @@ -109,15 +134,19 @@ pci_ers_result_t dpc_reset_link(struct pci_dev *pdev)
> if (pdev->dpc_rp_extensions && dpc_wait_rp_inactive(pdev))
> return PCI_ERS_RESULT_DISCONNECT;
>
> + atomic_inc_return_acquire(&pdev->dpc_reset_active);
> +
> pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,
> PCI_EXP_DPC_STATUS_TRIGGER);
>
> if (!pcie_wait_for_link(pdev, true)) {
> pci_info(pdev, "Data Link Layer Link Active not set in 1000 msec\n");
> - return PCI_ERS_RESULT_DISCONNECT;
> + status = PCI_ERS_RESULT_DISCONNECT;
> }
>
> - return PCI_ERS_RESULT_RECOVERED;
> + atomic_dec_return_release(&pdev->dpc_reset_active);
> +
> + return status;
> }
>
> static void dpc_process_rp_pio_error(struct pci_dev *pdev)
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index 86c799c97b77..3314f616520d 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -479,6 +479,7 @@ struct pci_dev {
> u16 dpc_cap;
> unsigned int dpc_rp_extensions:1;
> u8 dpc_rp_log_size;
> + atomic_t dpc_reset_active; /* DPC trigger is active */
> #endif
> #ifdef CONFIG_PCI_ATS
> union {
> --
> 2.25.1
>
Powered by blists - more mailing lists