lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20210312091528.GA1577@agape.jhs>
Date:   Fri, 12 Mar 2021 10:15:29 +0100
From:   Fabio Aiuto <fabioaiuto83@...il.com>
To:     Eric Curtin <ericcurtin17@...il.com>
Cc:     gregkh@...uxfoundation.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] staging: rtl8723bs: align comments

On Wed, Mar 10, 2021 at 10:27:53PM +0000, Eric Curtin wrote:
> Hi Fabio,
> 
> > I am sorry, I fear I don't understand, checkpatch.sh script says the patch is ok.
> > Where have I to add a ' ' (a blank?)?
> >
> > thank you,
> >
> > fabio
> >
> 
> I'm only responding to this because this email is doing a very good job
> of avoiding my filters somehow :) I think what Greg means is:
> 
> Change this:
> 
>  /*
> -op_mode
> -Set to 0 (HT pure) under the following conditions
> -       - all STAs in the BSS are 20/40 MHz HT in 20/40 MHz BSS or
> -       - all STAs in the BSS are 20 MHz HT in 20 MHz BSS
> -Set to 1 (HT non-member protection) if there may be non-HT STAs
> -       in both the primary and the secondary channel
> -Set to 2 if only HT STAs are associated in BSS,
> -       however and at least one 20 MHz HT STA is associated
> -Set to 3 (HT mixed mode) when one or more non-HT STAs are associated
> -       (currently non-GF HT station is considered as non-HT STA also)
> -*/
> + *op_mode
> + *Set to 0 (HT pure) under the following conditions
> + *      - all STAs in the BSS are 20/40 MHz HT in 20/40 MHz BSS or
> + *      - all STAs in the BSS are 20 MHz HT in 20 MHz BSS
> + *Set to 1 (HT non-member protection) if there may be non-HT STAs
> + *      in both the primary and the secondary channel
> + *Set to 2 if only HT STAs are associated in BSS,
> + *      however and at least one 20 MHz HT STA is associated
> + *Set to 3 (HT mixed mode) when one or more non-HT STAs are associated
> + *      (currently non-GF HT station is considered as non-HT STA also)
> + */
> 
> to this:
> 
>  /*
> -op_mode
> -Set to 0 (HT pure) under the following conditions
> -       - all STAs in the BSS are 20/40 MHz HT in 20/40 MHz BSS or
> -       - all STAs in the BSS are 20 MHz HT in 20 MHz BSS
> -Set to 1 (HT non-member protection) if there may be non-HT STAs
> -       in both the primary and the secondary channel
> -Set to 2 if only HT STAs are associated in BSS,
> -       however and at least one 20 MHz HT STA is associated
> -Set to 3 (HT mixed mode) when one or more non-HT STAs are associated
> -       (currently non-GF HT station is considered as non-HT STA also)
> -*/
> + * op_mode
> + * Set to 0 (HT pure) under the following conditions
> + *      - all STAs in the BSS are 20/40 MHz HT in 20/40 MHz BSS or
> + *      - all STAs in the BSS are 20 MHz HT in 20 MHz BSS
> + * Set to 1 (HT non-member protection) if there may be non-HT STAs
> + *      in both the primary and the secondary channel
> + * Set to 2 if only HT STAs are associated in BSS,
> + *      however and at least one 20 MHz HT STA is associated
> + * Set to 3 (HT mixed mode) when one or more non-HT STAs are associated
> + *      (currently non-GF HT station is considered as non-HT STA also)
> + * /
> 
> Like Dan said, you need a space after the '*'/
> 
> Is mise le meas/Regards,
> 
> Eric Curtin
> 
> Check out this charity that's close to my heart:
> 
> https://www.idonate.ie/fundraiser/11394438_peak-for-pat.html
> https://www.facebook.com/Peak-for-Pat-104470678280309
> https://www.instagram.com/peakforpat/

Thank you Eric, community is the best resource ever :), hope to contribute
soon

Kind regards,

Fabio

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ