linux-kernel - [PATCH v1] ata: ahci: Disable SXS for Hisilicon Kunpeng920

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1615544676-61926-1-git-send-email-luojiaxing@huawei.com>
Date:   Fri, 12 Mar 2021 18:24:36 +0800
From:   Luo Jiaxing <luojiaxing@...wei.com>
To:     <axboe@...nel.dk>
CC:     <linux-ide@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <linuxarm@...neuler.org>, <john.garry@...wei.com>,
        <yangxingui@...wei.com>, <luojiaxing@...wei.com>
Subject: [PATCH v1] ata: ahci: Disable SXS for Hisilicon Kunpeng920

From: Xingui Yang <yangxingui@...wei.com>

On Hisilicon Kunpeng920, ESP is set to 1 by default for all ports of
SATA controller. In some scenarios, some ports are not external SATA ports,
and it cause disks connected to these ports to be identified as removable
disks. So disable the SXS capability on the software side to prevent users
from mistakenly considering non-removable disks as removable disks and
performing related operations.

Signed-off-by: Xingui Yang <yangxingui@...wei.com>
Signed-off-by: Luo Jiaxing <luojiaxing@...wei.com>
Reviewed-by: John Garry <john.garry@...wei.com>
---
 drivers/ata/ahci.c    | 5 +++++
 drivers/ata/ahci.h    | 1 +
 drivers/ata/libahci.c | 5 +++++
 3 files changed, 11 insertions(+)

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 00ba8e5..33192a8 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1772,6 +1772,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		hpriv->flags |= AHCI_HFLAG_NO_DEVSLP;
 
 #ifdef CONFIG_ARM64
+	if (pdev->vendor == PCI_VENDOR_ID_HUAWEI &&
+	    pdev->device == 0xa235 &&
+	    pdev->revision < 0x30)
+		hpriv->flags |= AHCI_HFLAG_NO_SXS;
+
 	if (pdev->vendor == 0x177d && pdev->device == 0xa01c)
 		hpriv->irq_handler = ahci_thunderx_irq_handler;
 #endif
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 98b8baa..d1f284f 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -242,6 +242,7 @@ enum {
 							suspend/resume */
 	AHCI_HFLAG_IGN_NOTSUPP_POWER_ON	= (1 << 27), /* ignore -EOPNOTSUPP
 							from phy_power_on() */
+	AHCI_HFLAG_NO_SXS		= (1 << 28), /* SXS not supported */
 
 	/* ap->flags bits */
 
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ea5bf5f..fec2e97 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -493,6 +493,11 @@ void ahci_save_initial_config(struct device *dev, struct ahci_host_priv *hpriv)
 		cap |= HOST_CAP_ALPM;
 	}
 
+	if ((cap & HOST_CAP_SXS) && (hpriv->flags & AHCI_HFLAG_NO_SXS)) {
+		dev_info(dev, "controller does not support SXS, disabling CAP_SXS\n");
+		cap &= ~HOST_CAP_SXS;
+	}
+
 	if (hpriv->force_port_map && port_map != hpriv->force_port_map) {
 		dev_info(dev, "forcing port_map 0x%x -> 0x%x\n",
 			 port_map, hpriv->force_port_map);
-- 
2.7.4