| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210314163445.6976-5-noltari@gmail.com>
Date: Sun, 14 Mar 2021 17:34:44 +0100
From: Álvaro Fernández Rojas
<noltari@...il.com>
To: Florian Fainelli <f.fainelli@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Philippe Mathieu-Daudé <f4bug@...at.org>,
Paul Burton <paulburton@...nel.org>,
Jonas Gorski <jonas.gorski@...il.com>,
bcm-kernel-feedback-list@...adcom.com, linux-mips@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Álvaro Fernández Rojas
<noltari@...il.com>
Subject: [PATCH 4/5] mips: bmips: bcm6362: populate device tree nodes
- Rename periph_clk to periph_osc.
- Rename clkctl to periph_clk.
- Move syscon-reboot to subnode.
- Add hsspi-osc clock.
- Add watchdog.
- Add SPI controller.
- Add HS SPI controller.
- Add NAND controller.
- Add USBH PHY.
Signed-off-by: Álvaro Fernández Rojas <noltari@...il.com>
---
arch/mips/boot/dts/brcm/bcm6362.dtsi | 127 ++++++++++++++++++++++++---
1 file changed, 116 insertions(+), 11 deletions(-)
diff --git a/arch/mips/boot/dts/brcm/bcm6362.dtsi b/arch/mips/boot/dts/brcm/bcm6362.dtsi
index 50c287bedc37..d74021925c53 100644
--- a/arch/mips/boot/dts/brcm/bcm6362.dtsi
+++ b/arch/mips/boot/dts/brcm/bcm6362.dtsi
@@ -29,16 +29,29 @@
};
clocks {
- periph_clk: periph-clk {
+ periph_osc: periph-osc {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <50000000>;
+ clock-output-names = "periph";
+ };
+
+ hsspi_osc: hsspi-osc {
+ compatible = "fixed-clock";
+
+ #clock-cells = <0>;
+
+ clock-frequency = <400000000>;
+ clock-output-names = "hsspi_osc";
};
};
aliases {
+ nflash = &nflash;
serial0 = &uart0;
serial1 = &uart1;
+ spi0 = &lsspi;
+ spi1 = &hsspi;
};
cpu_intc: interrupt-controller {
@@ -56,23 +69,22 @@
compatible = "simple-bus";
ranges;
- clkctl: clock-controller@...00004 {
+ periph_clk: clock-controller@...00004 {
compatible = "brcm,bcm6362-clocks";
reg = <0x10000004 0x4>;
#clock-cells = <1>;
};
- periph_cntl: syscon@...00008 {
+ pll_cntl: syscon@...00008 {
compatible = "syscon";
reg = <0x10000008 0x4>;
native-endian;
- };
- reboot: syscon-reboot@...00008 {
- compatible = "syscon-reboot";
- regmap = <&periph_cntl>;
- offset = <0x0>;
- mask = <0x1>;
+ reboot {
+ compatible = "syscon-reboot";
+ offset = <0x0>;
+ mask = <0x1>;
+ };
};
periph_rst: reset-controller@...00010 {
@@ -93,6 +105,16 @@
interrupts = <2>, <3>;
};
+ wdt: watchdog@...0005c {
+ compatible = "brcm,bcm7038-wdt";
+ reg = <0x1000005c 0xc>;
+
+ clocks = <&periph_osc>;
+ clock-names = "refclk";
+
+ timeout-sec = <30>;
+ };
+
uart0: serial@...00100 {
compatible = "brcm,bcm6345-uart";
reg = <0x10000100 0x18>;
@@ -100,7 +122,7 @@
interrupt-parent = <&periph_intc>;
interrupts = <3>;
- clocks = <&periph_clk>;
+ clocks = <&periph_osc>;
clock-names = "refclk";
status = "disabled";
@@ -113,12 +135,72 @@
interrupt-parent = <&periph_intc>;
interrupts = <4>;
- clocks = <&periph_clk>;
+ clocks = <&periph_osc>;
clock-names = "refclk";
status = "disabled";
};
+ nflash: nand@...00200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,nand-bcm6368",
+ "brcm,brcmnand-v2.2",
+ "brcm,brcmnand";
+ reg = <0x10000200 0x180>,
+ <0x10000600 0x200>,
+ <0x10000070 0x10>;
+ reg-names = "nand",
+ "nand-cache",
+ "nand-int-base";
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <12>;
+
+ clocks = <&periph_clk BCM6362_CLK_NAND>;
+ clock-names = "nand";
+
+ status = "disabled";
+ };
+
+ lsspi: spi@...00800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6358-spi";
+ reg = <0x10000800 0x70c>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <2>;
+
+ clocks = <&periph_clk BCM6362_CLK_SPI>;
+ clock-names = "spi";
+
+ resets = <&periph_rst BCM6362_RST_SPI>;
+ reset-names = "spi";
+
+ status = "disabled";
+ };
+
+ hsspi: spi@...01000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "brcm,bcm6328-hsspi";
+ reg = <0x10001000 0x600>;
+
+ interrupt-parent = <&periph_intc>;
+ interrupts = <5>;
+
+ clocks = <&periph_clk BCM6362_CLK_HSSPI>,
+ <&hsspi_osc>;
+ clock-names = "hsspi",
+ "pll";
+
+ resets = <&periph_rst BCM6362_RST_SPI>;
+ reset-names = "hsspi";
+
+ status = "disabled";
+ };
+
periph_pwr: power-controller@...01848 {
compatible = "brcm,bcm6362-power-controller";
reg = <0x10001848 0x4>;
@@ -142,6 +224,9 @@
interrupt-parent = <&periph_intc>;
interrupts = <10>;
+ phys = <&usbh 0>;
+ phy-names = "usb";
+
status = "disabled";
};
@@ -154,6 +239,26 @@
interrupt-parent = <&periph_intc>;
interrupts = <9>;
+ phys = <&usbh 0>;
+ phy-names = "usb";
+
+ status = "disabled";
+ };
+
+ usbh: usb-phy@...02700 {
+ compatible = "brcm,bcm6362-usbh-phy";
+ reg = <0x10002700 0x38>;
+
+ #phy-cells = <1>;
+
+ clocks = <&periph_clk BCM6362_CLK_USBH>;
+ clock-names = "usbh";
+
+ power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_USBH>;
+
+ resets = <&periph_rst BCM6362_RST_USBH>;
+ reset-names = "usbh";
+
status = "disabled";
};
};
--
2.20.1
Powered by blists - more mailing lists