linux-kernel - [PATCH 4.14 54/95] xhci: Improve detection of device initiated wake signal.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20210315135742.045483785@linuxfoundation.org>
Date:   Mon, 15 Mar 2021 14:57:24 +0100
From:   gregkh@...uxfoundation.org
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        Mathias Nyman <mathias.nyman@...ux.intel.com>
Subject: [PATCH 4.14 54/95] xhci: Improve detection of device initiated wake signal.

From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

From: Mathias Nyman <mathias.nyman@...ux.intel.com>

commit 253f588c70f66184b1f3a9bbb428b49bbda73e80 upstream.

A xHC USB 3 port might miss the first wake signal from a USB 3 device
if the port LFPS reveiver isn't enabled fast enough after xHC resume.

xHC host will anyway be resumed by a PME# signal, but will go back to
suspend if no port activity is seen.
The device resends the U3 LFPS wake signal after a 100ms delay, but
by then host is already suspended, starting all over from the
beginning of this issue.

USB 3 specs say U3 wake LFPS signal is sent for max 10ms, then device
needs to delay 100ms before resending the wake.

Don't suspend immediately if port activity isn't detected in resume.
Instead add a retry. If there is no port activity then delay for 120ms,
and re-check for port activity.

Cc: <stable@...r.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@...ux.intel.com>
Link: https://lore.kernel.org/r/20210311115353.2137560-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/usb/host/xhci.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1021,6 +1021,7 @@ int xhci_resume(struct xhci_hcd *xhci, b
 	struct usb_hcd		*secondary_hcd;
 	int			retval = 0;
 	bool			comp_timer_running = false;
+	bool			pending_portevent = false;
 
 	if (!hcd->state)
 		return 0;
@@ -1154,13 +1155,22 @@ int xhci_resume(struct xhci_hcd *xhci, b
 
  done:
 	if (retval == 0) {
-		/* Resume root hubs only when have pending events. */
-		if (xhci_pending_portevent(xhci)) {
+		/*
+		 * Resume roothubs only if there are pending events.
+		 * USB 3 devices resend U3 LFPS wake after a 100ms delay if
+		 * the first wake signalling failed, give it that chance.
+		 */
+		pending_portevent = xhci_pending_portevent(xhci);
+		if (!pending_portevent) {
+			msleep(120);
+			pending_portevent = xhci_pending_portevent(xhci);
+		}
+
+		if (pending_portevent) {
 			usb_hcd_resume_root_hub(xhci->shared_hcd);
 			usb_hcd_resume_root_hub(hcd);
 		}
 	}
-
 	/*
 	 * If system is subject to the Quirk, Compliance Mode Timer needs to
 	 * be re-initialized Always after a system resume. Ports are subject