[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210315052711.16728-7-boon.leong.ong@intel.com>
Date: Mon, 15 Mar 2021 13:27:11 +0800
From: Ong Boon Leong <boon.leong.ong@...el.com>
To: Giuseppe Cavallaro <peppe.cavallaro@...com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King i <linux@...linux.org.uk>,
Alexandre Torgue <alexandre.torgue@...com>,
Jose Abreu <joabreu@...opsys.com>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>
Cc: Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org, linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Ong Boon Leong <boon.leong.ong@...el.com>,
Voon Weifeng <weifeng.voon@...el.com>,
Wong Vee Khee <vee.khee.wong@...el.com>,
Fugang Duan <fugang.duan@....com>
Subject: [PATCH net-next 6/6] stmmac: intel: add pcs-xpcs for Intel mGbE controller
Intel mGbE controller such as those in EHL & TGL uses pcs-xpcs driver for
SGMII interface. To ensure mdio bus scanning does not assign phy_device
to MDIO-addressable entities like intel serdes and pcs-xpcs, we set up
to phy_mask to skip them.
Signed-off-by: Ong Boon Leong <boon.leong.ong@...el.com>
---
drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index 0b64f7710d17..c49646773871 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -9,6 +9,9 @@
#include "dwmac4.h"
#include "stmmac.h"
+#define INTEL_MGBE_ADHOC_ADDR 0x15
+#define INTEL_MGBE_XPCS_ADDR 0x16
+
struct intel_priv_data {
int mdio_adhoc_addr; /* mdio address for serdes & etc */
};
@@ -333,6 +336,16 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
/* Use the last Rx queue */
plat->vlan_fail_q = plat->rx_queues_to_use - 1;
+ /* Intel mgbe SGMII interface uses pcs-xcps */
+ if (plat->phy_interface == PHY_INTERFACE_MODE_SGMII) {
+ plat->mdio_bus_data->has_xpcs = true;
+ plat->mdio_bus_data->xpcs_an_inband = true;
+ }
+
+ /* Ensure mdio bus scan skips intel serdes and pcs-xpcs */
+ plat->mdio_bus_data->phy_mask = 1 << INTEL_MGBE_ADHOC_ADDR;
+ plat->mdio_bus_data->phy_mask |= 1 << INTEL_MGBE_XPCS_ADDR;
+
return 0;
}
@@ -664,7 +677,7 @@ static int intel_eth_pci_probe(struct pci_dev *pdev,
pci_set_master(pdev);
plat->bsp_priv = intel_priv;
- intel_priv->mdio_adhoc_addr = 0x15;
+ intel_priv->mdio_adhoc_addr = INTEL_MGBE_ADHOC_ADDR;
ret = info->setup(pdev, plat);
if (ret)
--
2.25.1
Powered by blists - more mailing lists