linux-kernel - Re: [PATCH v7 2/2] hwspinlock: add sun6i hardware spinlock support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210315161220.sxjkam7bqli5fk5y@gilmour>
Date:   Mon, 15 Mar 2021 17:12:20 +0100
From:   Maxime Ripard <maxime@...no.tech>
To:     Wilken Gottwalt <wilken.gottwalt@...teo.net>
Cc:     linux-kernel@...r.kernel.org, Ohad Ben-Cohen <ohad@...ery.com>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Baolin Wang <baolin.wang7@...il.com>,
        Rob Herring <robh+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...l.net>
Subject: Re: [PATCH v7 2/2] hwspinlock: add sun6i hardware spinlock support

On Sun, Mar 14, 2021 at 10:31:13AM +0100, Wilken Gottwalt wrote:
> Adds the sun6i_hwspinlock driver for the hardware spinlock unit found in
> most of the sun6i compatible SoCs.
> 
> This unit provides at least 32 spinlocks in hardware. The implementation
> supports 32, 64, 128 or 256 32bit registers. A lock can be taken by
> reading a register and released by writing a 0 to it. This driver
> supports all 4 spinlock setups, but for now only the first setup (32
> locks) seem to exist in available devices. This spinlock unit is shared
> between all ARM cores and the embedded companion core. All of them can
> take/release a lock with a single cycle operation. It can be used to
> sync access to devices shared by the ARM cores and the companion core.
> 
> There are two ways to check if a lock is taken. The first way is to read
> a lock. If a 0 is returned, the lock was free and is taken now. If an 1
> is returned, the caller has to try again. Which means the lock is taken.
> The second way is to read a 32bit wide status register where every bit
> represents one of the 32 first locks. According to the datasheets this
> status register supports only the 32 first locks. This is the reason the
> first way (lock read/write) approach is used to be able to cover all 256
> locks in future devices. The driver also reports the amount of supported
> locks via debugfs.
> 
> Signed-off-by: Wilken Gottwalt <wilken.gottwalt@...teo.net>

Acked-by: Maxime Ripard <maxime@...no.tech>

Maxime

Download attachment "signature.asc" of type "application/pgp-signature" (229 bytes)