[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAD=FV=V=pRSP4FkJciYkpHa=A8i_GjGTz64Kzz_h9eGFQeD1cA@mail.gmail.com>
Date: Mon, 15 Mar 2021 10:40:30 -0700
From: Doug Anderson <dianders@...omium.org>
To: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>,
Stephen Boyd <swboyd@...omium.org>,
Alexandru M Stan <amstan@...omium.org>,
Matthias Kaehlcke <mka@...omium.org>,
Rob Clark <robdclark@...omium.org>,
Jeykumar Sankaran <jsanka@...eaurora.org>,
Chandan Uddaraju <chandanu@...eaurora.org>,
Vara Reddy <varar@...eaurora.org>,
Tanmay Shah <tanmay@...eaurora.org>,
Andy Gross <agross@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linux-arm-msm <linux-arm-msm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 01/13] arm64: dts: qcom: sc7180: Update dts for DP phy
inside QMP phy
Hi,
On Sat, Mar 13, 2021 at 4:28 PM Dmitry Baryshkov
<dmitry.baryshkov@...aro.org> wrote:
>
> > usb_1_qmpphy: phy-wrapper@...9000 {
> > - compatible = "qcom,sc7180-qmp-usb3-phy";
> > + compatible = "qcom,sc7180-qmp-usb3-dp-phy";
> > reg = <0 0x088e9000 0 0x18c>,
> > - <0 0x088e8000 0 0x38>;
> > - reg-names = "reg-base", "dp_com";
> > + <0 0x088e8000 0 0x38>,
>
> Technically this should be 0x3c. Offset 0x38 is USB3_DP_COM_REVISION_ID3
> (not used by the current driver though).
>
> > + <0 0x088ea000 0 0x40>;
>
> I think 0x40 is not enough here.
> This is a serdes region and qmp_v3_dp_serdes_tbl contains registers
> 0x148 and 0x154.
OK!
https://lore.kernel.org/r/20210315103836.1.I9a97120319d43b42353aeac4d348624d60687df7@changeid
-Doug
Powered by blists - more mailing lists