[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210315190806.66762-1-sander@svanheule.net>
Date: Mon, 15 Mar 2021 20:08:04 +0100
From: Sander Vanheule <sander@...nheule.net>
To: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>, linux-kernel@...r.kernel.org,
Sander Vanheule <sander@...nheule.net>, bert@...t.com
Subject: [PATCH v2 0/2] Add Realtek Otto GPIO support
Add support for the GPIO controller employed by Realtek in multiple series of
MIPS SoCs. These include the supported RTL838x and RTL839x. The register layout
also matches the one found in the GPIO controller of other (Lexra-based) SoCs
such as RTL8196E, RTL8197D, and RTL8197F.
For the platform name 'otto', I am not aware of any official resources as to
what hardware this specifically applies to. However, in all of the GPL archives
we've received, from vendors using compatible SoCs in their design, the
platform under the MIPS architecture is referred to by this name.
The GPIO ports have been tested on a Zyxel GS1900-8 (RTL8380), and Zyxel
GS1900-48 (RTL8393). Furthermore, the GPIO ports and interrupt controller have
been tested on a Netgear GS110TPPv1 (RTL8381).
Changes in v2:
- Clarify structure and usage of IMR registers
Sander Vanheule (2):
dt-bindings: gpio: Binding for Realtek Otto GPIO
gpio: Add Realtek Otto GPIO support
.../bindings/gpio/gpio-realtek-otto.yaml | 80 +++++
drivers/gpio/Kconfig | 12 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-realtek-otto.c | 331 ++++++++++++++++++
4 files changed, 424 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-realtek-otto.yaml
create mode 100644 drivers/gpio/gpio-realtek-otto.c
--
2.30.2
Powered by blists - more mailing lists