| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210316175503.1003051-4-kubernat@cesnet.cz>
Date: Tue, 16 Mar 2021 18:55:01 +0100
From: Václav Kubernát <kubernat@...net.cz>
To: unlisted-recipients:; (no To-header on input)
Cc: Václav Kubernát <kubernat@...net.cz>,
Jean Delvare <jdelvare@...e.com>,
Guenter Roeck <linux@...ck-us.net>,
Jonathan Corbet <corbet@....net>, linux-hwmon@...r.kernel.org,
linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 4/5] hwmon: (max31790) Allow setting fan*_div
Right now, the divisor (which determines the speed range) is only set
when in RPM mode. However, the speed range also affects the input RPM,
which means, to get more accurate readings, this speed range needs to be
set.
Signed-off-by: Václav Kubernát <kubernat@...net.cz>
---
Documentation/hwmon/max31790.rst | 1 +
drivers/hwmon/max31790.c | 79 +++++++++++++++++++++++++++-----
2 files changed, 68 insertions(+), 12 deletions(-)
diff --git a/Documentation/hwmon/max31790.rst b/Documentation/hwmon/max31790.rst
index 8979c8a02cd1..2979addeac8f 100644
--- a/Documentation/hwmon/max31790.rst
+++ b/Documentation/hwmon/max31790.rst
@@ -38,6 +38,7 @@ Sysfs entries
fan[1-12]_enable RW enable fan speed monitoring
fan[1-12]_input RO fan tachometer speed in RPM
fan[1-12]_fault RO fan experienced fault
+fan[1-12]_div RW set the measurable speed range, not available in RPM mode
fan[1-6]_target RW desired fan speed in RPM
pwm[1-6]_enable RW regulator mode, 0=full speed, 1=manual (pwm) mode, 2=rpm mode
setting rpm mode sets fan*_enable to 1
diff --git a/drivers/hwmon/max31790.c b/drivers/hwmon/max31790.c
index 7b47797db471..235a71bbff84 100644
--- a/drivers/hwmon/max31790.c
+++ b/drivers/hwmon/max31790.c
@@ -156,6 +156,26 @@ static int write_reg_word(struct regmap *regmap, u8 reg, u16 val)
return regmap_bulk_write(regmap, reg, bulk_val, 2);
}
+static int bits_for_speed_range(long speed_range)
+{
+ switch (speed_range) {
+ case 1:
+ return 0x0;
+ case 2:
+ return 0x1;
+ case 4:
+ return 0x2;
+ case 8:
+ return 0x3;
+ case 16:
+ return 0x4;
+ case 32:
+ return 0x5;
+ default:
+ return -1;
+ }
+}
+
static int max31790_read_fan(struct device *dev, u32 attr, int channel,
long *val)
{
@@ -228,6 +248,13 @@ static int max31790_read_fan(struct device *dev, u32 attr, int channel,
*val = !!(cfg & MAX31790_FAN_CFG_TACH_INPUT_EN);
return 0;
+ case hwmon_fan_div:
+ cfg = read_reg_byte(regmap, MAX31790_REG_FAN_CONFIG(channel));
+ if (cfg < 0)
+ return cfg;
+
+ *val = get_tach_period(cfg);
+ return 0;
default:
return -EOPNOTSUPP;
}
@@ -281,6 +308,33 @@ static int max31790_write_fan(struct device *dev, u32 attr, int channel,
cfg |= MAX31790_FAN_CFG_TACH_INPUT_EN;
err = regmap_write(regmap, MAX31790_REG_FAN_CONFIG(channel), cfg);
break;
+ case hwmon_fan_div:
+ cfg = read_reg_byte(regmap, MAX31790_REG_FAN_CONFIG(channel));
+ if (cfg < 0)
+ return cfg;
+
+ if (cfg & MAX31790_FAN_CFG_RPM_MODE) {
+ err = -EINVAL;
+ break;
+ }
+ sr = bits_for_speed_range(val);
+ if (sr < 0) {
+ err = -EINVAL;
+ break;
+ }
+
+ fan_dynamics = read_reg_byte(regmap, MAX31790_REG_FAN_DYNAMICS(channel));
+
+ if (fan_dynamics < 0)
+ return fan_dynamics;
+
+ fan_dynamics = ((fan_dynamics &
+ ~MAX31790_FAN_DYN_SR_MASK) |
+ (sr << MAX31790_FAN_DYN_SR_SHIFT));
+ err = regmap_write(regmap,
+ MAX31790_REG_FAN_DYNAMICS(channel),
+ fan_dynamics);
+ break;
default:
err = -EOPNOTSUPP;
break;
@@ -311,6 +365,7 @@ static umode_t max31790_fan_is_visible(const void *_data, u32 attr, int channel)
return 0644;
return 0;
case hwmon_fan_enable:
+ case hwmon_fan_div:
if (channel < NR_CHANNEL ||
(fan_config & MAX31790_FAN_CFG_TACH_INPUT))
return 0644;
@@ -485,18 +540,18 @@ static umode_t max31790_is_visible(const void *data,
static const struct hwmon_channel_info *max31790_info[] = {
HWMON_CHANNEL_INFO(fan,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT,
- HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT),
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_TARGET | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT,
+ HWMON_F_DIV | HWMON_F_ENABLE | HWMON_F_INPUT | HWMON_F_FAULT),
HWMON_CHANNEL_INFO(pwm,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
HWMON_PWM_INPUT | HWMON_PWM_ENABLE,
--
2.30.2
Powered by blists - more mailing lists