| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <YFBNJJPLhxZ5Xx7c@vkoul-mobl>
Date: Tue, 16 Mar 2021 11:46:04 +0530
From: Vinod Koul <vkoul@...nel.org>
To: Caleb Connolly <caleb@...nolly.tech>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <bjorn.andersson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: qcom: sm8150: add i2c nodes
On 10-03-21, 16:31, Caleb Connolly wrote:
> Tested on the OnePlus 7 Pro (including DMA).
Lgtm:
Reviewed-by: Vinod Koul <vkoul@...nel.org>
But missing enabling nodes in board dts ..?
>
> Signed-off-by: Caleb Connolly <caleb@...nolly.tech>
> ---
> arch/arm64/boot/dts/qcom/sm8150.dtsi | 521 +++++++++++++++++++++++++++
> 1 file changed, 521 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> index 543417d74216..0a38ad54c715 100644
> --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
> @@ -588,6 +588,111 @@ qupv3_id_0: geniqup@...000 {
> #size-cells = <2>;
> ranges;
> status = "disabled";
> +
> + i2c0: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00880000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c0_default>;
> + interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00884000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c1_default>;
> + interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00888000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c2_default>;
> + interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x0088c000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c3_default>;
> + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00890000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c4_default>;
> + interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00894000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c5_default>;
> + interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c6: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00898000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c6_default>;
> + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c7: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x0089c000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c7_default>;
> + interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> };
>
> qupv3_id_1: geniqup@...000 {
> @@ -602,6 +707,58 @@ qupv3_id_1: geniqup@...000 {
> ranges;
> status = "disabled";
>
> + i2c8: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a80000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c8_default>;
> + interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c9: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a84000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c9_default>;
> + interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c10: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a88000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c10_default>;
> + interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c11: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a8c000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c11_default>;
> + interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> uart2: serial@...000 {
> compatible = "qcom,geni-debug-uart";
> reg = <0x0 0x00a90000 0x0 0x4000>;
> @@ -610,6 +767,32 @@ uart2: serial@...000 {
> interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
> +
> + i2c12: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00a90000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c12_default>;
> + interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c16: i2c@...00 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x0094000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c16_default>;
> + interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> qupv3_id_2: geniqup@...000 {
> @@ -624,6 +807,84 @@ qupv3_id_2: geniqup@...000 {
> #size-cells = <2>;
> ranges;
> status = "disabled";
> +
> + i2c17: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00c80000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c17_default>;
> + interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c18: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00c84000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c18_default>;
> + interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c19: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00c88000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c19_default>;
> + interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "okay";
> + };
> +
> + i2c13: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00c8c000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c13_default>;
> + interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c14: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00c90000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c14_default>;
> + interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c15: i2c@...000 {
> + compatible = "qcom,geni-i2c";
> + reg = <0 0x00c94000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_i2c15_default>;
> + interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> };
>
> config_noc: interconnect@...0000 {
> @@ -947,6 +1208,266 @@ tlmm: pinctrl@...0000 {
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> +
> + qup_i2c0_default: qup-i2c0-default {
> + mux {
> + pins = "gpio0", "gpio1";
> + function = "qup0";
> + };
> +
> + config {
> + pins = "gpio0", "gpio1";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c1_default: qup-i2c1-default {
> + mux {
> + pins = "gpio114", "gpio115";
> + function = "qup1";
> + };
> +
> + config {
> + pins = "gpio114", "gpio115";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c2_default: qup-i2c2-default {
> + mux {
> + pins = "gpio126", "gpio127";
> + function = "qup2";
> + };
> +
> + config {
> + pins = "gpio126", "gpio127";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c3_default: qup-i2c3-default {
> + mux {
> + pins = "gpio144", "gpio145";
> + function = "qup3";
> + };
> +
> + config {
> + pins = "gpio144", "gpio145";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c4_default: qup-i2c4-default {
> + mux {
> + pins = "gpio51", "gpio52";
> + function = "qup4";
> + };
> +
> + config {
> + pins = "gpio51", "gpio52";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c5_default: qup-i2c5-default {
> + mux {
> + pins = "gpio121", "gpio122";
> + function = "qup5";
> + };
> +
> + config {
> + pins = "gpio121", "gpio122";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c6_default: qup-i2c6-default {
> + mux {
> + pins = "gpio6", "gpio7";
> + function = "qup6";
> + };
> +
> + config {
> + pins = "gpio6", "gpio7";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c7_default: qup-i2c7-default {
> + mux {
> + pins = "gpio98", "gpio99";
> + function = "qup7";
> + };
> +
> + config {
> + pins = "gpio98", "gpio99";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c8_default: qup-i2c8-default {
> + mux {
> + pins = "gpio88", "gpio89";
> + function = "qup8";
> + };
> +
> + config {
> + pins = "gpio88", "gpio89";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c9_default: qup-i2c9-default {
> + mux {
> + pins = "gpio39", "gpio40";
> + function = "qup9";
> + };
> +
> + config {
> + pins = "gpio39", "gpio40";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c10_default: qup-i2c10-default {
> + mux {
> + pins = "gpio9", "gpio10";
> + function = "qup10";
> + };
> +
> + config {
> + pins = "gpio9", "gpio10";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c11_default: qup-i2c11-default {
> + mux {
> + pins = "gpio94", "gpio95";
> + function = "qup11";
> + };
> +
> + config {
> + pins = "gpio94", "gpio95";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c12_default: qup-i2c12-default {
> + mux {
> + pins = "gpio83", "gpio84";
> + function = "qup12";
> + };
> +
> + config {
> + pins = "gpio83", "gpio84";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c13_default: qup-i2c13-default {
> + mux {
> + pins = "gpio43", "gpio44";
> + function = "qup13";
> + };
> +
> + config {
> + pins = "gpio43", "gpio44";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c14_default: qup-i2c14-default {
> + mux {
> + pins = "gpio47", "gpio48";
> + function = "qup14";
> + };
> +
> + config {
> + pins = "gpio47", "gpio48";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c15_default: qup-i2c15-default {
> + mux {
> + pins = "gpio27", "gpio28";
> + function = "qup15";
> + };
> +
> + config {
> + pins = "gpio27", "gpio28";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c16_default: qup-i2c16-default {
> + mux {
> + pins = "gpio86", "gpio85";
> + function = "qup16";
> + };
> +
> + config {
> + pins = "gpio86", "gpio85";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c17_default: qup-i2c17-default {
> + mux {
> + pins = "gpio55", "gpio56";
> + function = "qup17";
> + };
> +
> + config {
> + pins = "gpio55", "gpio56";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c18_default: qup-i2c18-default {
> + mux {
> + pins = "gpio23", "gpio24";
> + function = "qup18";
> + };
> +
> + config {
> + pins = "gpio23", "gpio24";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> +
> + qup_i2c19_default: qup-i2c19-default {
> + mux {
> + pins = "gpio57", "gpio58";
> + function = "qup19";
> + };
> +
> + config {
> + pins = "gpio57", "gpio58";
> + drive-strength = <0x02>;
> + bias-disable;
> + };
> + };
> };
>
> remoteproc_mpss: remoteproc@...0000 {
> --
> 2.29.2
>
--
~Vinod
Powered by blists - more mailing lists