[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20210316070144.28440-2-michael.kao@mediatek.com>
Date: Tue, 16 Mar 2021 15:01:42 +0800
From: Michael Kao <michael.kao@...iatek.com>
To: <michael.kao@...iatek.com>, <fan.chen@...iatek.com>,
Zhang Rui <rui.zhang@...el.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
<linux-pm@...r.kernel.org>, <srv_heupstream@...iatek.com>
CC: Eduardo Valentin <edubezval@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
<hsinyi@...omium.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>
Subject: [v7,1/3] arm64: dts: mt8183: add thermal zone node
From: "michael.kao" <michael.kao@...iatek.com>
Add thermal zone node to Mediatek MT8183 dts file.
Evaluate the thermal zone every 500ms while not cooling
and every 100ms when passive cooling is performed.
Signed-off-by: Matthias Kaehlcke <mka@...omium.org>
Signed-off-by: Michael Kao <michael.kao@...iatek.com>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 85 ++++++++++++++++++++++++
1 file changed, 85 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 5b782a4769e7..d3550af06408 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -657,6 +657,87 @@
status = "disabled";
};
+ thermal: thermal@...0b000 {
+ #thermal-sensor-cells = <1>;
+ compatible = "mediatek,mt8183-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_THERM>,
+ <&infracfg CLK_INFRA_AUXADC>;
+ clock-names = "therm", "auxadc";
+ resets = <&infracfg MT8183_INFRACFG_AO_THERM_SW_RST>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_LOW>;
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu_thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <500>;
+ thermal-sensors = <&thermal 0>;
+ sustainable-power = <5000>;
+ };
+
+ /* The tzts1 ~ tzts6 don't need to polling */
+ /* The tzts1 ~ tzts6 don't need to thermal throttle */
+
+ tzts1: tzts1 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 1>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+
+ tzts2: tzts2 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 2>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+
+ tzts3: tzts3 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 3>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+
+ tzts4: tzts4 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 4>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+
+ tzts5: tzts5 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 5>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+
+ tztsABB: tztsABB {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&thermal 6>;
+ sustainable-power = <5000>;
+ trips {};
+ cooling-maps {};
+ };
+ };
+
pwm0: pwm@...0e000 {
compatible = "mediatek,mt8183-disp-pwm";
reg = <0 0x1100e000 0 0x1000>;
@@ -926,6 +1007,10 @@
reg = <0 0x11f10000 0 0x1000>;
#address-cells = <1>;
#size-cells = <1>;
+ thermal_calibration: calib@180 {
+ reg = <0x180 0xc>;
+ };
+
mipi_tx_calibration: calib@190 {
reg = <0x190 0xc>;
};
--
2.18.0
Powered by blists - more mailing lists