| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHp75VdVnFn+DuO54PsUVGk4ZWWCJpYKsSQVsaUkiDzZki2QRQ@mail.gmail.com>
Date: Wed, 17 Mar 2021 14:27:53 +0200
From: Andy Shevchenko <andy.shevchenko@...il.com>
To: Hanna Hawa <hhhawa@...zon.com>
Cc: Tony Lindgren <tony@...mide.com>,
Haojian Zhuang <haojian.zhuang@...aro.org>,
Linus Walleij <linus.walleij@...aro.org>,
David Woodhouse <dwmw@...zon.co.uk>, benh@...zon.com,
ronenk@...zon.com, talel@...zon.com, jonnyc@...zon.com,
hanochu@...zon.com, tgershi@...zon.com,
linux-arm Mailing List <linux-arm-kernel@...ts.infradead.org>,
Linux OMAP Mailing List <linux-omap@...r.kernel.org>,
"open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 3/3] pinctrl: pinctrl-single: fix pcs_pin_dbg_show()
when bits_per_mux != 0
On Tue, Mar 16, 2021 at 11:24 PM Hanna Hawa <hhhawa@...zon.com> wrote:
>
> An SError was detected when trying to print the supported pins in a
What SError is?
> pinctrl device which supports multiple pins per register. This change
> fixes the pcs_pin_dbg_show() in pinctrl-single driver when
> bits_per_mux != 0. In addition move offset calculation and pin offset in
'!= 0' -> 'is not zero'
> register to common function.
Fixes tag?
> Signed-off-by: Hanna Hawa <hhhawa@...zon.com>
> ---
> drivers/pinctrl/pinctrl-single.c | 66 ++++++++++++++++++++++----------
> 1 file changed, 45 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/pinctrl/pinctrl-single.c b/drivers/pinctrl/pinctrl-single.c
> index f3394517cb2e..434f90c8b1b3 100644
> --- a/drivers/pinctrl/pinctrl-single.c
> +++ b/drivers/pinctrl/pinctrl-single.c
> @@ -270,20 +270,53 @@ static void __maybe_unused pcs_writel(unsigned val, void __iomem *reg)
> writel(val, reg);
> }
>
> +static unsigned int pcs_pin_reg_offset_get(struct pcs_device *pcs,
> + unsigned int pin)
> +{
> + unsigned int offset, mux_bytes;
Offset can be replaced by direct return statements.
> + mux_bytes = pcs->width / BITS_PER_BYTE;
> +
> + if (pcs->bits_per_mux) {
> + unsigned int pin_offset_bytes;
> +
> + pin_offset_bytes = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
> + offset = (pin_offset_bytes / mux_bytes) * mux_bytes;
> + } else {
> + offset = pin * mux_bytes;
> + }
> +
> + return offset;
> +}
> +
> +static unsigned int pcs_pin_shift_reg_get(struct pcs_device *pcs,
> + unsigned int pin)
> +{
> + return ((pin % (pcs->width / pcs->bits_per_pin)) * pcs->bits_per_pin);
Too many parentheses.
> +}
> +
> static void pcs_pin_dbg_show(struct pinctrl_dev *pctldev,
> struct seq_file *s,
> unsigned pin)
> {
> struct pcs_device *pcs;
> - unsigned val, mux_bytes;
> + unsigned int val;
> unsigned long offset;
> size_t pa;
>
> pcs = pinctrl_dev_get_drvdata(pctldev);
>
> - mux_bytes = pcs->width / BITS_PER_BYTE;
> - offset = pin * mux_bytes;
> - val = pcs->read(pcs->base + offset);
> + offset = pcs_pin_reg_offset_get(pcs, pin);
> +
> + if (pcs->bits_per_mux) {
> + unsigned int pin_shift_in_reg = pcs_pin_shift_reg_get(pcs, pin);
> + val = pcs->read(pcs->base + offset)
> + & (pcs->fmask << pin_shift_in_reg);
One line?
At least move & to the upper line.
> + } else {
> + val = pcs->read(pcs->base + offset);
It's the same as in above branch, why not
val = read();
if ()
val &= fmask << _reg_get(...);
?
> + }
> +
> pa = pcs->res->start + offset;
>
> seq_printf(s, "%zx %08x %s ", pa, val, DRIVER_NAME);
> @@ -384,7 +417,6 @@ static int pcs_request_gpio(struct pinctrl_dev *pctldev,
> struct pcs_device *pcs = pinctrl_dev_get_drvdata(pctldev);
> struct pcs_gpiofunc_range *frange = NULL;
> struct list_head *pos, *tmp;
> - int mux_bytes = 0;
> unsigned data;
>
> /* If function mask is null, return directly. */
> @@ -392,29 +424,27 @@ static int pcs_request_gpio(struct pinctrl_dev *pctldev,
> return -ENOTSUPP;
>
> list_for_each_safe(pos, tmp, &pcs->gpiofuncs) {
> + u32 offset;
> +
> frange = list_entry(pos, struct pcs_gpiofunc_range, node);
> if (pin >= frange->offset + frange->npins
> || pin < frange->offset)
> continue;
> - mux_bytes = pcs->width / BITS_PER_BYTE;
>
> - if (pcs->bits_per_mux) {
> - int byte_num, offset, pin_shift;
> + offset = pcs_pin_reg_offset_get(pcs, pin);
>
> - byte_num = (pcs->bits_per_pin * pin) / BITS_PER_BYTE;
> - offset = (byte_num / mux_bytes) * mux_bytes;
> - pin_shift = pin % (pcs->width / pcs->bits_per_pin) *
> - pcs->bits_per_pin;
> + if (pcs->bits_per_mux) {
> + int pin_shift = pcs_pin_shift_reg_get(pcs, pin);
>
> data = pcs->read(pcs->base + offset);
> data &= ~(pcs->fmask << pin_shift);
> data |= frange->gpiofunc << pin_shift;
> pcs->write(data, pcs->base + offset);
> } else {
> - data = pcs->read(pcs->base + pin * mux_bytes);
> + data = pcs->read(pcs->base + offset);
> data &= ~pcs->fmask;
> data |= frange->gpiofunc;
> - pcs->write(data, pcs->base + pin * mux_bytes);
> + pcs->write(data, pcs->base + offset);
> }
> break;
> }
> @@ -724,14 +754,8 @@ static int pcs_allocate_pin_table(struct pcs_device *pcs)
> for (i = 0; i < pcs->desc.npins; i++) {
> unsigned offset;
> int res;
> - int byte_num;
>
> - if (pcs->bits_per_mux) {
> - byte_num = (pcs->bits_per_pin * i) / BITS_PER_BYTE;
> - offset = (byte_num / mux_bytes) * mux_bytes;
> - } else {
> - offset = i * mux_bytes;
> - }
> + offset = pcs_pin_reg_offset_get(pcs, i);
> res = pcs_add_pin(pcs, offset);
> if (res < 0) {
> dev_err(pcs->dev, "error adding pins: %i\n", res);
> --
> 2.17.1
>
--
With Best Regards,
Andy Shevchenko
Powered by blists - more mailing lists