| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210317133220.sv2nlyyiw4nnai4t@earth.universe>
Date: Wed, 17 Mar 2021 14:32:20 +0100
From: Sebastian Reichel <sre@...nel.org>
To: LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
Cc: robh+dt@...nel.org, pali@...nel.org, krzk@...nel.org,
linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
grygorii.tertychnyi@...ca-geosystems.com,
andrey.zhizhikin@...ca-geosystems.com
Subject: Re: [PATCH V6 2/2] power: supply: bq27xxx: Add support for BQ78Z100
Hi,
On Wed, Mar 17, 2021 at 10:49:18AM +0000, LI Qingwu wrote:
> Add support for TI BQ78Z100, I2C interface gas gauge.
> It provides a fully integrated safety protection
> and authentication for 1 to 2-series cell Li-Ion and
> Li-Polymer battery packs.
>
> The patch was tested with BQ78Z100 equipment.
>
> Signed-off-by: LI Qingwu <Qing-wu.Li@...ca-geosystems.com.cn>
> Reviewed-by: Krzysztof Kozlowski <krzk@...nel.org>
>
> result of cat "/sys/class/power_supply/<bat_name>/uevent"
>
> CASE I: Discharging current>0:
> POWER_SUPPLY_NAME=bq78z100-0
> POWER_SUPPLY_STATUS=Discharging
> POWER_SUPPLY_PRESENT=1
> POWER_SUPPLY_VOLTAGE_NOW=3405000
> POWER_SUPPLY_CURRENT_NOW=4000
4mA @ 3.4V is 13.6 mW, which seems really small to me.
Is this what you expect for your hardware?
> POWER_SUPPLY_CAPACITY=28
> POWER_SUPPLY_CAPACITY_LEVEL=Normal
> POWER_SUPPLY_TEMP=259
> POWER_SUPPLY_TIME_TO_EMPTY_NOW=1611000
I guess 18 days TTE is expected with such a small discharge rate.
> POWER_SUPPLY_TECHNOLOGY=Li-ion
> POWER_SUPPLY_CHARGE_FULL=6494000
> POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000
> POWER_SUPPLY_CYCLE_COUNT=1
> POWER_SUPPLY_ENERGY_NOW=0
You are not feeding ENERGY_NOW with data, so do not expose it.
> POWER_SUPPLY_POWER_AVG=65535
That's a signed int16 -1 and looks suspicious. Especially since
expected power average is around 13.6 mW. Is something wrong with
the handling of BQ27XXX_REG_AP for your chip?
> POWER_SUPPLY_HEALTH=Good
> POWER_SUPPLY_MANUFACTURER=Texas Instruments
>
> CASE II : No discharging current:
> POWER_SUPPLY_NAME=bq78z100-0
> POWER_SUPPLY_STATUS=Discharging
That should actually be "Not Charging" for an idle battery. I
suppose recent changes to bq27000, which I applied in the last
few days to my for-next branch, might fix this.
> POWER_SUPPLY_PRESENT=1
> POWER_SUPPLY_VOLTAGE_NOW=3405000
> POWER_SUPPLY_CURRENT_NOW=0
> POWER_SUPPLY_CAPACITY=28
> POWER_SUPPLY_CAPACITY_LEVEL=Normal
> POWER_SUPPLY_TEMP=260
> POWER_SUPPLY_TECHNOLOGY=Li-ion
> POWER_SUPPLY_CHARGE_FULL=6494000
> POWER_SUPPLY_CHARGE_FULL_DESIGN=6000000
> POWER_SUPPLY_CYCLE_COUNT=1
> POWER_SUPPLY_ENERGY_NOW=0
> POWER_SUPPLY_POWER_AVG=0
> POWER_SUPPLY_HEALTH=Good
> POWER_SUPPLY_MANUFACTURER=Texas Instruments
> ---
You should expose POWER_SUPPLY_PROP_CHARGE_NOW for exposing
BQ27XXX_REG_RC info, which is more precise than CAPACITY.
Thanks,
-- Sebastian
> drivers/power/supply/bq27xxx_battery.c | 44 ++++++++++++++++++++++
> drivers/power/supply/bq27xxx_battery_i2c.c | 2 +
> include/linux/power/bq27xxx_battery.h | 1 +
> 3 files changed, 47 insertions(+)
>
> diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
> index 4c4a7b1c64c5..05a4f9190160 100644
> --- a/drivers/power/supply/bq27xxx_battery.c
> +++ b/drivers/power/supply/bq27xxx_battery.c
> @@ -39,6 +39,7 @@
> * https://www.ti.com/product/bq27z561
> * https://www.ti.com/product/bq28z610
> * https://www.ti.com/product/bq34z100-g1
> + * https://www.ti.com/product/bq78z100
> */
>
> #include <linux/device.h>
> @@ -515,6 +516,27 @@ static u8
> [BQ27XXX_REG_DCAP] = 0x3c,
> [BQ27XXX_REG_AP] = 0x22,
> BQ27XXX_DM_REG_ROWS,
> + },
> + bq78z100_regs[BQ27XXX_REG_MAX] = {
> + [BQ27XXX_REG_CTRL] = 0x00,
> + [BQ27XXX_REG_TEMP] = 0x06,
> + [BQ27XXX_REG_INT_TEMP] = 0x28,
> + [BQ27XXX_REG_VOLT] = 0x08,
> + [BQ27XXX_REG_AI] = 0x14,
> + [BQ27XXX_REG_FLAGS] = 0x0a,
> + [BQ27XXX_REG_TTE] = 0x16,
> + [BQ27XXX_REG_TTF] = 0x18,
> + [BQ27XXX_REG_TTES] = 0x1c,
> + [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
> + [BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
> + [BQ27XXX_REG_RC] = 0x10,
> + [BQ27XXX_REG_FCC] = 0x12,
> + [BQ27XXX_REG_CYCT] = 0x2a,
> + [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
> + [BQ27XXX_REG_SOC] = 0x2c,
> + [BQ27XXX_REG_DCAP] = 0x3c,
> + [BQ27XXX_REG_AP] = 0x22,
> + BQ27XXX_DM_REG_ROWS,
> };
>
> static enum power_supply_property bq27000_props[] = {
> @@ -813,6 +835,26 @@ static enum power_supply_property bq34z100_props[] = {
> POWER_SUPPLY_PROP_MANUFACTURER,
> };
>
> +static enum power_supply_property bq78z100_props[] = {
> + POWER_SUPPLY_PROP_STATUS,
> + POWER_SUPPLY_PROP_PRESENT,
> + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> + POWER_SUPPLY_PROP_CURRENT_NOW,
> + POWER_SUPPLY_PROP_CAPACITY,
> + POWER_SUPPLY_PROP_CAPACITY_LEVEL,
> + POWER_SUPPLY_PROP_TEMP,
> + POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
> + POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
> + POWER_SUPPLY_PROP_TECHNOLOGY,
> + POWER_SUPPLY_PROP_CHARGE_FULL,
> + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
> + POWER_SUPPLY_PROP_CYCLE_COUNT,
> + POWER_SUPPLY_PROP_ENERGY_NOW,
> + POWER_SUPPLY_PROP_POWER_AVG,
> + POWER_SUPPLY_PROP_HEALTH,
> + POWER_SUPPLY_PROP_MANUFACTURER,
> +};
> +
> struct bq27xxx_dm_reg {
> u8 subclass_id;
> u8 offset;
> @@ -911,6 +953,7 @@ static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
> #define bq27z561_dm_regs 0
> #define bq28z610_dm_regs 0
> #define bq34z100_dm_regs 0
> +#define bq78z100_dm_regs 0
>
> #define BQ27XXX_O_ZERO BIT(0)
> #define BQ27XXX_O_OTDC BIT(1) /* has OTC/OTD overtemperature flags */
> @@ -969,6 +1012,7 @@ static struct {
> [BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , BQ27Z561_O_BITS),
> [BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
> BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
> + [BQ78Z100] = BQ27XXX_DATA(bq78z100, 0x00000000, BQ27Z561_O_BITS),
> };
>
> static DEFINE_MUTEX(bq27xxx_list_lock);
> diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
> index eb4f4284982f..46f078350fd3 100644
> --- a/drivers/power/supply/bq27xxx_battery_i2c.c
> +++ b/drivers/power/supply/bq27xxx_battery_i2c.c
> @@ -248,6 +248,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
> { "bq27z561", BQ27Z561 },
> { "bq28z610", BQ28Z610 },
> { "bq34z100", BQ34Z100 },
> + { "bq78z100", BQ78Z100 },
> {},
> };
> MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
> @@ -284,6 +285,7 @@ static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
> { .compatible = "ti,bq27z561" },
> { .compatible = "ti,bq28z610" },
> { .compatible = "ti,bq34z100" },
> + { .compatible = "ti,bq78z100" },
> {},
> };
> MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
> diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
> index 111a40d0d3d5..ac17618043b1 100644
> --- a/include/linux/power/bq27xxx_battery.h
> +++ b/include/linux/power/bq27xxx_battery.h
> @@ -33,6 +33,7 @@ enum bq27xxx_chip {
> BQ27Z561,
> BQ28Z610,
> BQ34Z100,
> + BQ78Z100,
> };
>
> struct bq27xxx_device_info;
> --
> 2.17.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists