| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 17 Mar 2021 14:48:34 +0100
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: Sebastian Reichel <sre@...nel.org>,
Rob Herring <robh+dt@...nel.org>
Cc: linux-pm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Sebastian Reichel <sebastian.reichel@...labora.com>,
kernel@...labora.com
Subject: [PATCHv2 08/38] dt-bindings: power: supply: bq24735: Convert to DT schema format
Convert the binding to DT schema format.
Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
---
.../bindings/power/supply/bq24735.yaml | 89 +++++++++++++++++++
.../bindings/power/supply/ti,bq24735.txt | 39 --------
2 files changed, 89 insertions(+), 39 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power/supply/bq24735.yaml
delete mode 100644 Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
diff --git a/Documentation/devicetree/bindings/power/supply/bq24735.yaml b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
new file mode 100644
index 000000000000..131be6782c4b
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/bq24735.yaml
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (C) 2021 Sebastian Reichel
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/power/supply/bq24735.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Binding for TI BQ24735 Li-Ion Battery Charger
+
+maintainers:
+ - Sebastian Reichel <sre@...nel.org>
+
+allOf:
+ - $ref: power-supply.yaml#
+
+properties:
+ compatible:
+ const: ti,bq24735
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ description: AC adapter plug event interrupt
+ maxItems: 1
+
+ ti,ac-detect-gpios:
+ maxItems: 1
+ description: |
+ This GPIO is optionally used to read the AC adapter status. This is a Host GPIO
+ that is configured as an input and connected to the ACOK pin on the bq24735.
+ Note: for backwards compatibility reasons, the GPIO must be active on AC adapter
+ absence despite ACOK being active (high) on AC adapter presence.
+
+ ti,charge-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charging current.
+ This value must be between 128mA and 8.128A with a 64mA step resolution.
+ The POR value is 0x0000h. This number is in mA (e.g. 8192).
+ See spec for more information about the ChargeCurrent (0x14h) register.
+
+ ti,charge-voltage:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charging voltage.
+ This value must be between 1.024V and 19.2V with a 16mV step resolution.
+ The POR value is 0x0000h. This number is in mV (e.g. 19200).
+ See spec for more information about the ChargeVoltage (0x15h) register.
+
+ ti,input-current:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ Used to control and set the charger input current.
+ This value must be between 128mA and 8.064A with a 128mA step resolution.
+ The POR value is 0x1000h. This number is in mA (e.g. 8064).
+ See the spec for more information about the InputCurrent (0x3fh) register.
+
+ ti,external-control:
+ type: boolean
+ description: |
+ Indicates that the charger is configured externally and that the host should not
+ attempt to enable/disable charging or set the charge voltage/current.
+
+ poll-interval:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: |
+ If 'interrupts' is not specified, poll AC adapter presence with this interval (milliseconds).
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ charger@9 {
+ compatible = "ti,bq24735";
+ reg = <0x9>;
+ ti,ac-detect-gpios = <&gpio 72 0x1>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt b/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
deleted file mode 100644
index de45e1a2a4d9..000000000000
--- a/Documentation/devicetree/bindings/power/supply/ti,bq24735.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-TI BQ24735 Charge Controller
-~~~~~~~~~~
-
-Required properties :
- - compatible : "ti,bq24735"
-
-Optional properties :
- - interrupts : Specify the interrupt to be used to trigger when the AC
- adapter is either plugged in or removed.
- - ti,ac-detect-gpios : This GPIO is optionally used to read the AC adapter
- status. This is a Host GPIO that is configured as an input and connected
- to the ACOK pin on the bq24735. Note: for backwards compatibility reasons,
- the GPIO must be active on AC adapter absence despite ACOK being active
- (high) on AC adapter presence.
- - ti,charge-current : Used to control and set the charging current. This value
- must be between 128mA and 8.128A with a 64mA step resolution. The POR value
- is 0x0000h. This number is in mA (e.g. 8192), see spec for more information
- about the ChargeCurrent (0x14h) register.
- - ti,charge-voltage : Used to control and set the charging voltage. This value
- must be between 1.024V and 19.2V with a 16mV step resolution. The POR value
- is 0x0000h. This number is in mV (e.g. 19200), see spec for more information
- about the ChargeVoltage (0x15h) register.
- - ti,input-current : Used to control and set the charger input current. This
- value must be between 128mA and 8.064A with a 128mA step resolution. The
- POR value is 0x1000h. This number is in mA (e.g. 8064), see the spec for
- more information about the InputCurrent (0x3fh) register.
- - ti,external-control : Indicates that the charger is configured externally
- and that the host should not attempt to enable/disable charging or set the
- charge voltage/current.
- - poll-interval : In case 'interrupts' is not specified, poll AC adapter
- presence with this interval (milliseconds).
-
-Example:
-
- bq24735@9 {
- compatible = "ti,bq24735";
- reg = <0x9>;
- ti,ac-detect-gpios = <&gpio 72 0x1>;
- }
--
2.30.2
Powered by blists - more mailing lists