| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210317143803.26127-4-noltari@gmail.com>
Date: Wed, 17 Mar 2021 15:37:44 +0100
From: Álvaro Fernández Rojas
<noltari@...il.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Rob Herring <robh+dt@...nel.org>,
Lee Jones <lee.jones@...aro.org>,
Michael Walle <michael@...le.cc>,
Florian Fainelli <f.fainelli@...il.com>,
bcm-kernel-feedback-list@...adcom.com,
Jonas Gorski <jonas.gorski@...il.com>,
Álvaro Fernández Rojas
<noltari@...il.com>,
Necip Fazil Yildiran <fazilyildiran@...il.com>,
Andy Shevchenko <andy.shevchenko@...il.com>,
linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v8 03/22] dt-bindings: improve BCM6345 GPIO binding documentation
Convert existing BCM6345 GPIO binding documentation to YAML and add binding
documentation for the GPIO controller found in BCM6318, BCM6328, BCM6358,
BCM6362, BCM6368 and BCM63268 SoCs.
Co-developed-by: Jonas Gorski <jonas.gorski@...il.com>
Signed-off-by: Jonas Gorski <jonas.gorski@...il.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@...il.com>
---
v8: introduce changes suggested by Rob Herring
v7: new patch, splitted from pinctrl documentation
.../bindings/gpio/brcm,bcm6345-gpio.txt | 46 -----------
.../bindings/gpio/brcm,bcm6345-gpio.yaml | 78 +++++++++++++++++++
2 files changed, 78 insertions(+), 46 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
create mode 100644 Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
deleted file mode 100644
index e7853143fa42..000000000000
--- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers.
-
-These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
-are the only ones which don't need a pinctrl driver.
-BCM6338 have 8-bit data and dirout registers, where GPIO state can be read
-and/or written, and the direction changed from input to output.
-BCM6345 have 16-bit data and dirout registers, where GPIO state can be read
-and/or written, and the direction changed from input to output.
-
-Required properties:
- - compatible: should be "brcm,bcm6345-gpio"
- - reg-names: must contain
- "dat" - data register
- "dirout" - direction (output) register
- - reg: address + size pairs describing the GPIO register sets;
- order must correspond with the order of entries in reg-names
- - #gpio-cells: must be set to 2. The first cell is the pin number and
- the second cell is used to specify the gpio polarity:
- 0 = active high
- 1 = active low
- - gpio-controller: Marks the device node as a gpio controller.
-
-Optional properties:
- - native-endian: use native endian memory.
-
-Examples:
- - BCM6338:
- gpio: gpio-controller@...e0407 {
- compatible = "brcm,bcm6345-gpio";
- reg-names = "dirout", "dat";
- reg = <0xfffe0407 1>, <0xfffe040f 1>;
-
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- - BCM6345:
- gpio: gpio-controller@...e0406 {
- compatible = "brcm,bcm6345-gpio";
- reg-names = "dirout", "dat";
- reg = <0xfffe0406 2>, <0xfffe040a 2>;
- native-endian;
-
- #gpio-cells = <2>;
- gpio-controller;
- };
diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
new file mode 100644
index 000000000000..d1d34a347a1f
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM6345 GPIO controller
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@...il.com>
+ - Jonas Gorski <jonas.gorski@...il.com>
+
+description: |+
+ Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers.
+
+ These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345
+ are the only ones which don't need a pinctrl driver.
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm6318-gpio
+ - brcm,bcm6328-gpio
+ - brcm,bcm6345-gpio
+ - brcm,bcm6358-gpio
+ - brcm,bcm6362-gpio
+ - brcm,bcm6368-gpio
+ - brcm,bcm63268-gpio
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ native-endian: true
+
+ reg:
+ maxItems: 2
+
+ reg-names:
+ items:
+ - const: dirout
+ - const: dat
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - gpio-controller
+ - '#gpio-cells'
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio-controller@...e0406 {
+ compatible = "brcm,bcm6345-gpio";
+ reg-names = "dirout", "dat";
+ reg = <0xfffe0406 2>, <0xfffe040a 2>;
+ native-endian;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ - |
+ gpio@0 {
+ compatible = "brcm,bcm63268-gpio";
+ reg-names = "dirout", "dat";
+ reg = <0x0 0x8>, <0x8 0x8>;
+
+ gpio-controller;
+ gpio-ranges = <&pinctrl 0 0 52>;
+ #gpio-cells = <2>;
+ };
--
2.20.1
Powered by blists - more mailing lists