linux-kernel - [PATCH v2 7/7] pps: clients: gpio: Rearrange optional stuff in pps_gpio

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-Id: <20210318130321.24227-7-andriy.shevchenko@linux.intel.com>
Date:   Thu, 18 Mar 2021 15:03:21 +0200
From:   Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To:     Rodolfo Giometti <giometti@...eenne.com>,
        Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
        linux-kernel@...r.kernel.org
Cc:     Ryan Govostes <rgovostes@...i.edu>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Andrew Morton <akpm@...ux-foundation.org>
Subject: [PATCH v2 7/7] pps: clients: gpio: Rearrange optional stuff in pps_gpio_setup()

Rearrange optional stuff in pps_gpio_setup() so it will go after mandatory one
and with reduced indentation. This will increase readability of the sources.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Acked-by: Rodolfo Giometti <giometti@...eenne.com>
---
 drivers/pps/clients/pps-gpio.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/pps/clients/pps-gpio.c b/drivers/pps/clients/pps-gpio.c
index b097da5a659a..35799e6401c9 100644
--- a/drivers/pps/clients/pps-gpio.c
+++ b/drivers/pps/clients/pps-gpio.c
@@ -110,28 +110,31 @@ static int pps_gpio_setup(struct device *dev)
 		return dev_err_probe(dev, PTR_ERR(data->gpio_pin),
 				     "failed to request PPS GPIO\n");
 
+	data->assert_falling_edge =
+		device_property_read_bool(dev, "assert-falling-edge");
+
 	data->echo_pin = devm_gpiod_get_optional(dev, "echo", GPIOD_OUT_LOW);
 	if (IS_ERR(data->echo_pin))
 		return dev_err_probe(dev, PTR_ERR(data->echo_pin),
 				     "failed to request ECHO GPIO\n");
 
-	if (data->echo_pin) {
-		ret = device_property_read_u32(dev, "echo-active-ms", &value);
-		if (ret) {
-			dev_err(dev, "failed to get echo-active-ms from FW\n");
-			return ret;
-		}
-		data->echo_active_ms = value;
-		/* sanity check on echo_active_ms */
-		if (!data->echo_active_ms || data->echo_active_ms > 999) {
-			dev_err(dev, "echo-active-ms: %u - bad value from FW\n",
-				data->echo_active_ms);
-			return -EINVAL;
-		}
+	if (!data->echo_pin)
+		return 0;
+
+	ret = device_property_read_u32(dev, "echo-active-ms", &value);
+	if (ret) {
+		dev_err(dev, "failed to get echo-active-ms from FW\n");
+		return ret;
 	}
 
-	data->assert_falling_edge =
-		device_property_read_bool(dev, "assert-falling-edge");
+	/* sanity check on echo_active_ms */
+	if (!value || value > 999) {
+		dev_err(dev, "echo-active-ms: %u - bad value from FW\n", value);
+		return -EINVAL;
+	}
+
+	data->echo_active_ms = value;
+
 	return 0;
 }
 
-- 
2.30.2