| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BN8PR12MB3556CA0C1635FFFD50390CDED3689@BN8PR12MB3556.namprd12.prod.outlook.com>
Date: Fri, 19 Mar 2021 20:23:14 +0000
From: Liming Sun <limings@...dia.com>
To: Ulf Hansson <ulf.hansson@...aro.org>
CC: Adrian Hunter <adrian.hunter@...el.com>,
Khalil Blaiech <kblaiech@...dia.com>,
linux-mmc <linux-mmc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v2] mmc: sdhci-of-dwcmshc: add ACPI support for
BlueField-3 SoC
Uffe,
Can I confirm whether you meant the 'master' branch or some other branch?
I did a rebase of master and didn't see Shawn Lin's changes in the sdhci-of-dwcmshc.c
Thanks,
Liming
> -----Original Message-----
> From: Ulf Hansson <ulf.hansson@...aro.org>
> Sent: Friday, March 19, 2021 10:12 AM
> To: Liming Sun <limings@...dia.com>
> Cc: Adrian Hunter <adrian.hunter@...el.com>; Khalil Blaiech
> <kblaiech@...dia.com>; linux-mmc <linux-mmc@...r.kernel.org>; Linux
> Kernel Mailing List <linux-kernel@...r.kernel.org>
> Subject: Re: [PATCH v2] mmc: sdhci-of-dwcmshc: add ACPI support for
> BlueField-3 SoC
>
> On Wed, 17 Mar 2021 at 00:20, Liming Sun <limings@...dia.com> wrote:
> >
> > This commit adds ACPI support in the sdhci-of-dwcmshc driver for
> > BlueField-3 SoC. It has changes to only use the clock hierarchy
> > for Deviec Tree since the clk is not supported by ACPI. Instead,
> > ACPI can define 'clock-frequency' which is parsed by existing
> > sdhci_get_property(). This clock value will be returned in function
> > dwcmshc_get_max_clock().
> >
> > Signed-off-by: Liming Sun <limings@...dia.com>
> > Reviewed-by: Khalil Blaiech <kblaiech@...dia.com>
>
> Liming, can you please rebase and repost a new version. It seems like
> Shawn Lin's patch that added rockchip platform support causes the
> conflict.
>
> Kind regards
> Uffe
>
>
> > ---
> > v1->v2:
> > Changes for comments from Adrian Hunter <adrian.hunter@...el.com>:
> > - Make changes in sdhci-of-dwcmshc instead.
> > v1: Initial version which was done in sdhci-acpi.c
> > ---
> > drivers/mmc/host/sdhci-of-dwcmshc.c | 50
> ++++++++++++++++++++++++++-----------
> > 1 file changed, 36 insertions(+), 14 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-of-dwcmshc.c
> b/drivers/mmc/host/sdhci-of-dwcmshc.c
> > index 59d8d96..bf5037a 100644
> > --- a/drivers/mmc/host/sdhci-of-dwcmshc.c
> > +++ b/drivers/mmc/host/sdhci-of-dwcmshc.c
> > @@ -7,6 +7,7 @@
> > * Author: Jisheng Zhang <jszhang@...nel.org>
> > */
> >
> > +#include <linux/acpi.h>
> > #include <linux/clk.h>
> > #include <linux/dma-mapping.h>
> > #include <linux/kernel.h>
> > @@ -51,6 +52,16 @@ static void dwcmshc_adma_write_desc(struct
> sdhci_host *host, void **desc,
> > sdhci_adma_write_desc(host, desc, addr, len, cmd);
> > }
> >
> > +static unsigned int dwcmshc_get_max_clock(struct sdhci_host *host)
> > +{
> > + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> > +
> > + if (pltfm_host->clk)
> > + return sdhci_pltfm_clk_get_max_clock(host);
> > + else
> > + return pltfm_host->clock;
> > +}
> > +
> > static void dwcmshc_check_auto_cmd23(struct mmc_host *mmc,
> > struct mmc_request *mrq)
> > {
> > @@ -104,7 +115,7 @@ static void dwcmshc_set_uhs_signaling(struct
> sdhci_host *host,
> > .set_clock = sdhci_set_clock,
> > .set_bus_width = sdhci_set_bus_width,
> > .set_uhs_signaling = dwcmshc_set_uhs_signaling,
> > - .get_max_clock = sdhci_pltfm_clk_get_max_clock,
> > + .get_max_clock = dwcmshc_get_max_clock,
> > .reset = sdhci_reset,
> > .adma_write_desc = dwcmshc_adma_write_desc,
> > };
> > @@ -117,6 +128,7 @@ static void dwcmshc_set_uhs_signaling(struct
> sdhci_host *host,
> >
> > static int dwcmshc_probe(struct platform_device *pdev)
> > {
> > + struct device *dev = &pdev->dev;
> > struct sdhci_pltfm_host *pltfm_host;
> > struct sdhci_host *host;
> > struct dwcmshc_priv *priv;
> > @@ -131,7 +143,7 @@ static int dwcmshc_probe(struct platform_device
> *pdev)
> > /*
> > * extra adma table cnt for cross 128M boundary handling.
> > */
> > - extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev),
> SZ_128M);
> > + extra = DIV_ROUND_UP_ULL(dma_get_required_mask(dev), SZ_128M);
> > if (extra > SDHCI_MAX_SEGS)
> > extra = SDHCI_MAX_SEGS;
> > host->adma_table_cnt += extra;
> > @@ -139,19 +151,21 @@ static int dwcmshc_probe(struct platform_device
> *pdev)
> > pltfm_host = sdhci_priv(host);
> > priv = sdhci_pltfm_priv(pltfm_host);
> >
> > - pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
> > - if (IS_ERR(pltfm_host->clk)) {
> > - err = PTR_ERR(pltfm_host->clk);
> > - dev_err(&pdev->dev, "failed to get core clk: %d\n", err);
> > - goto free_pltfm;
> > + if (dev->of_node) {
> > + pltfm_host->clk = devm_clk_get(dev, "core");
> > + if (IS_ERR(pltfm_host->clk)) {
> > + err = PTR_ERR(pltfm_host->clk);
> > + dev_err(dev, "failed to get core clk: %d\n", err);
> > + goto free_pltfm;
> > + }
> > + err = clk_prepare_enable(pltfm_host->clk);
> > + if (err)
> > + goto free_pltfm;
> > +
> > + priv->bus_clk = devm_clk_get(dev, "bus");
> > + if (!IS_ERR(priv->bus_clk))
> > + clk_prepare_enable(priv->bus_clk);
> > }
> > - err = clk_prepare_enable(pltfm_host->clk);
> > - if (err)
> > - goto free_pltfm;
> > -
> > - priv->bus_clk = devm_clk_get(&pdev->dev, "bus");
> > - if (!IS_ERR(priv->bus_clk))
> > - clk_prepare_enable(priv->bus_clk);
> >
> > err = mmc_of_parse(host->mmc);
> > if (err)
> > @@ -239,11 +253,19 @@ static int dwcmshc_resume(struct device *dev)
> > };
> > MODULE_DEVICE_TABLE(of, sdhci_dwcmshc_dt_ids);
> >
> > +#ifdef CONFIG_ACPI
> > +static const struct acpi_device_id sdhci_dwcmshc_acpi_ids[] = {
> > + { .id = "MLNXBF30" },
> > + {}
> > +};
> > +#endif
> > +
> > static struct platform_driver sdhci_dwcmshc_driver = {
> > .driver = {
> > .name = "sdhci-dwcmshc",
> > .probe_type = PROBE_PREFER_ASYNCHRONOUS,
> > .of_match_table = sdhci_dwcmshc_dt_ids,
> > + .acpi_match_table = ACPI_PTR(sdhci_dwcmshc_acpi_ids),
> > .pm = &dwcmshc_pmops,
> > },
> > .probe = dwcmshc_probe,
> > --
> > 1.8.3.1
> >
Powered by blists - more mailing lists