| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210319203253.3352417-6-joel@joelfernandes.org>
Date: Fri, 19 Mar 2021 16:32:52 -0400
From: "Joel Fernandes (Google)" <joel@...lfernandes.org>
To: Nishanth Aravamudan <naravamudan@...italocean.com>,
Julien Desfossez <jdesfossez@...italocean.com>,
Peter Zijlstra <peterz@...radead.org>,
Tim Chen <tim.c.chen@...ux.intel.com>,
Vineeth Pillai <viremana@...ux.microsoft.com>,
Aaron Lu <aaron.lwe@...il.com>,
Aubrey Li <aubrey.intel@...il.com>, tglx@...utronix.de,
linux-kernel@...r.kernel.org
Cc: mingo@...nel.org, torvalds@...ux-foundation.org,
fweisbec@...il.com, keescook@...omium.org,
Phil Auld <pauld@...hat.com>,
Valentin Schneider <valentin.schneider@....com>,
Mel Gorman <mgorman@...hsingularity.net>,
Pawan Gupta <pawan.kumar.gupta@...ux.intel.com>,
Paolo Bonzini <pbonzini@...hat.com>, joel@...lfernandes.org,
vineeth@...byteword.org, Chen Yu <yu.c.chen@...el.com>,
Christian Brauner <christian.brauner@...ntu.com>,
Agata Gruza <agata.gruza@...el.com>,
Antonio Gomez Iglesias <antonio.gomez.iglesias@...el.com>,
graf@...zon.com, konrad.wilk@...cle.com, dfaggioli@...e.com,
rostedt@...dmis.org, benbjiang@...cent.com,
Alexandre Chartre <alexandre.chartre@...cle.com>,
James.Bottomley@...senpartnership.com, OWeisse@...ch.edu,
Dhaval Giani <dhaval.giani@...cle.com>, chris.hyser@...cle.com,
Josh Don <joshdon@...gle.com>, Hao Luo <haoluo@...gle.com>,
Tom Lendacky <thomas.lendacky@....com>,
Randy Dunlap <rdunlap@...radead.org>
Subject: [PATCH 5/6] Documentation: Add core scheduling documentation
Document the usecases, design and interfaces for core scheduling.
Co-developed-by: Chris Hyser <chris.hyser@...cle.com>
Co-developed-by: Vineeth Pillai <viremana@...ux.microsoft.com>
Co-developed-by: Josh Don <joshdon@...gle.com>
Signed-off-by: Josh Don <joshdon@...gle.com>
Signed-off-by: Vineeth Pillai <viremana@...ux.microsoft.com>
Signed-off-by: Chris Hyser <chris.hyser@...cle.com>
Tested-by: Julien Desfossez <jdesfossez@...italocean.com>
Reviewed-by: Randy Dunlap <rdunlap@...radead.org>
Signed-off-by: Joel Fernandes (Google) <joel@...lfernandes.org>
---
.../admin-guide/hw-vuln/core-scheduling.rst | 460 ++++++++++++++++++
Documentation/admin-guide/hw-vuln/index.rst | 1 +
2 files changed, 461 insertions(+)
create mode 100644 Documentation/admin-guide/hw-vuln/core-scheduling.rst
diff --git a/Documentation/admin-guide/hw-vuln/core-scheduling.rst b/Documentation/admin-guide/hw-vuln/core-scheduling.rst
new file mode 100644
index 000000000000..50042e79709d
--- /dev/null
+++ b/Documentation/admin-guide/hw-vuln/core-scheduling.rst
@@ -0,0 +1,460 @@
+Core Scheduling
+***************
+Core scheduling support allows userspace to define groups of tasks that can
+share a core. These groups can be specified either for security usecases (one
+group of tasks don't trust another), or for performance usecases (some
+workloads may benefit from running on the same core as they don't need the same
+hardware resources of the shared core).
+
+Security usecase
+----------------
+A cross-HT attack involves the attacker and victim running on different
+Hyper Threads of the same core. MDS and L1TF are examples of such attacks.
+Without core scheduling, the only full mitigation of cross-HT attacks is to
+disable Hyper Threading (HT). Core scheduling allows HT to be turned on safely
+by ensuring that trusted tasks can share a core. This increase in core sharing
+can improvement performance, however it is not guaranteed that performance will
+always improve, though that is seen to be the case with a number of real world
+workloads. In theory, core scheduling aims to perform at least as good as when
+Hyper Threading is disabled. In practice, this is mostly the case though not
+always: as synchronizing scheduling decisions across 2 or more CPUs in a core
+involves additional overhead - especially when the system is lightly loaded
+(``total_threads <= N/2``, where N is the total number of CPUs).
+
+Usage
+-----
+Core scheduling support is enabled via the ``CONFIG_SCHED_CORE`` config option.
+Using this feature, userspace defines groups of tasks that trust each other.
+The core scheduler uses this information to make sure that tasks that do not
+trust each other will never run simultaneously on a core, while doing its best
+to satisfy the system's scheduling requirements.
+
+There are 2 ways to use core-scheduling:
+
+CGroup
+######
+Core scheduling adds additional files to the CPU controller CGroup:
+
+* ``cpu.core_tag``
+
+Writing ``1`` into this file results in all tasks in the group getting tagged.
+This results in all the CGroup's tasks allowed to run concurrently on a core's
+hyperthreads (also called siblings).
+
+The file being a value of ``0`` means the tag state of the CGroup is inherited
+from its parent hierarchy. If any ancestor of the CGroup is tagged, then the
+group is tagged.
+
+.. note:: Once a CGroup is tagged via cpu.core_tag, it is not possible to set this
+ for any descendant of the tagged group.
+
+.. note:: When a CGroup is not tagged, all the tasks within the group can share
+ a core with kernel threads and untagged system threads. For this reason,
+ if a group has ``cpu.core_tag`` of 0, it is considered to be trusted.
+
+prctl(2) interface
+##################
+
+A ``prtcl(2)`` command ``PR_SCHED_CORE_SHARE`` provides an interface for the
+creation of and admission and removal of tasks from core scheduling groups.
+Permission to change the ``cookie`` and hence the core scheduling group it
+represents is based on ``ptrace access``.
+
+::
+
+ #include <sys/prctl.h>
+
+ int prctl(int option, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5);
+
+ int prctl(PR_SCHED_CORE_SHARE, sub_command, pid, pid_type, 0);
+
+option:
+ ``PR_SCHED_CORE_SHARE``
+
+arg2:
+ sub-command:
+
+ - ``PR_SCHED_CORE_CLEAR 0 -- clear core_sched cookie of pid``
+ - ``PR_SCHED_CORE_CREATE 1 -- create a new cookie for pid``
+ - ``PR_SCHED_CORE_SHARE_FROM 2 -- copy core_sched cookie from pid``
+ - ``PR_SCHED_CORE_SHARE_TO 3 -- copy core_sched cookie to pid``
+
+arg3:
+ ``pid`` of the task for which the operation applies where ``pid == 0``
+ implies current process.
+
+arg4:
+ ``pid_type`` for PR_SCHED_CORE_CLEAR/CREATE/SHARE_TO is an enum
+ {PIDTYPE_PID=0, PIDTYPE_TGID, PIDTYPE_PGID} and determines how the target
+ ``pid`` should be interpreted. ``PIDTYPE_PID`` indicates that the target
+ ``pid`` should be treated as an individual task, ``PIDTYPE_TGID`` a process
+ or thread group, and ``PIDTYPE_PGID`` or a process group ``PIDTYPE_PGID``.
+
+arg5:
+ MUST be equal to 0.
+
+Return Value:
+::
+
+ EINVAL - bad parameter
+ ENOMEM - unable to allocate memory for a cookie.
+ ESRCH - unable to find specifed pid.
+ EPERM - caller lacks permission to change the cookie of target.
+ EACCES - caller lacks permission to change the cookies of all
+ targets of pidtype.
+
+Creation
+~~~~~~~~
+Creation is accomplished by creating a ''cookie'' for the target pid which may
+be an individual task if tgt_pid_type is ``PIDTYPE_PID``, a process and it's
+threads if ``PIDTYPE_TGID`` or all tasks of the specified process group if
+``PIDTYPE_PGID``.
+
+::
+
+ if (prctl(PR_SCHED_CORE_SHARE, PR_SCHED_CORE_CREATE, tgt_pid, tgt_pid_type, 0) < 0)
+ handle_error("sched_core_create failed");
+
+Examples:
+::
+
+ Given a process group, process and thread hierarchy:
+
+ ## Create a thread/process/process group hierarchy
+ tid=40003, / tgid=40003 / pgid=40003: 0
+ tid=40004, / tgid=40004 / pgid=40003: 0
+ tid=40005, / tgid=40004 / pgid=40003: 0
+ tid=40007, / tgid=40004 / pgid=40003: 0
+ tid=40008, / tgid=40004 / pgid=40003: 0
+ tid=40006, / tgid=40006 / pgid=40003: 0
+ tid=40009, / tgid=40006 / pgid=40003: 0
+ tid=40010, / tgid=40006 / pgid=40003: 0
+ tid=40011, / tgid=40006 / pgid=40003: 0
+
+ ## Set a cookie on entire process group
+ 0 = prctl(59, 1, 0, 2, 0)
+ tid=40003, / tgid=40003 / pgid=40003: 1f7121100000000
+ tid=40004, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40005, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40007, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40008, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40006, / tgid=40006 / pgid=40003: 1f7121100000000
+ tid=40009, / tgid=40006 / pgid=40003: 1f7121100000000
+ tid=40010, / tgid=40006 / pgid=40003: 1f7121100000000
+ tid=40011, / tgid=40006 / pgid=40003: 1f7121100000000
+
+ ## Set a new cookie on entire process/TGID [40006]
+ 0 = prctl(59, 1, 40006, 1, 0)
+ tid=40003, / tgid=40003 / pgid=40003: 1f7121100000000
+ tid=40004, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40005, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40007, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40008, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40006, / tgid=40006 / pgid=40003: 1f7121200000000
+ tid=40009, / tgid=40006 / pgid=40003: 1f7121200000000
+ tid=40010, / tgid=40006 / pgid=40003: 1f7121200000000
+ tid=40011, / tgid=40006 / pgid=40003: 1f7121200000000
+
+Removal
+~~~~~~~
+Removing a task(s) from a core scheduling group is done by specifying a target
+pid and it's type. Again, pidtype determines the interpretation of the target pid.
+
+::
+
+ if (prctl(PR_SCHED_CORE_SHARE, PR_SCHED_CORE_SHARE_CLEAR, tgt_pid, tgt_pid_type, 0) < 0)
+ handle_error("clr_tid sched_core failed");
+
+Examples (continued from above):
+::
+
+ ## Clear a cookie on a single task [40006]
+ 0 = prctl(59, 0, 40006, 0, 0)
+ tid=40003, / tgid=40003 / pgid=40003: 1f7121200000000
+ tid=40004, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40005, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40007, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40008, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40006, / tgid=40006 / pgid=40003: 0
+ tid=40009, / tgid=40006 / pgid=40003: 1f7121200000000
+ tid=40010, / tgid=40006 / pgid=40003: 1f7121200000000
+ tid=40011, / tgid=40006 / pgid=40003: 1f7121200000000
+
+ ## Clear cookies on the entire process group
+ 0 = prctl(59, 0, 0, 2, 0)
+ tid=40003, / tgid=40003 / pgid=40003: 0
+ tid=40004, / tgid=40004 / pgid=40003: 0
+ tid=40005, / tgid=40004 / pgid=40003: 0
+ tid=40007, / tgid=40004 / pgid=40003: 0
+ tid=40008, / tgid=40004 / pgid=40003: 0
+ tid=40006, / tgid=40006 / pgid=40003: 0
+ tid=40009, / tgid=40006 / pgid=40003: 0
+ tid=40010, / tgid=40006 / pgid=40003: 0
+ tid=40011, / tgid=40006 / pgid=40003: 0
+
+Cookie Transferal
+~~~~~~~~~~~~~~~~~
+
+Transferring a cookie between the current tasks and other tasks is possible using
+``PR_SCHED_CORE_SHARE_FROM`` and ``PR_SCHED_CORE_SHARE_TO`` depending on
+direction. A helper utility can copy cookies between tasks by first copying a
+cookie from the source task then sharing it using ``PR_SCHED_CORE_SHARE_TO`` to
+the target ``pid`` with, again, pidtype determine the interpretation of the target pid.
+
+::
+
+ if (prctl(PR_SCHED_CORE_SHARE, PR_SCHED_CORE_SHARE_FROM, from_pid, 0, 0) < 0)
+ handle_error("from_tid sched_core failed");
+
+ if (prctl(PR_SCHED_CORE_SHARE, PR_SCHED_CORE_SHARE_TO, to_pid, tgt_pid_type, 0) < 0)
+ handle_error("to_tid sched_core failed");
+
+Examples (continued from above):
+::
+
+ pidtype can even be used with SHARE_TO to "spread" the cookie among the
+ appropriate group by sharing with self.
+
+ ## given setup
+ tid=40003, / tgid=40003 / pgid=40003: 1f7121200000000
+ tid=40004, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40005, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40007, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40008, / tgid=40004 / pgid=40003: 1f7121100000000
+ tid=40006, / tgid=40006 / pgid=40003: 0
+ tid=40009, / tgid=40006 / pgid=40003: 1f7121200000000
+ tid=40010, / tgid=40006 / pgid=40003: 1f7121200000000
+ tid=40011, / tgid=40006 / pgid=40003: 1f7121200000000
+
+ ## Copy cookie from current [40003] to current as pidtype PGID
+ 0 = prctl(59, 3, 0, 2, 0)
+ tid=40003, / tgid=40003 / pgid=40003: 1f7121200000000
+ tid=40004, / tgid=40004 / pgid=40003: 1f7121200000000
+ tid=40005, / tgid=40004 / pgid=40003: 1f7121200000000
+ tid=40007, / tgid=40004 / pgid=40003: 1f7121200000000
+ tid=40008, / tgid=40004 / pgid=40003: 1f7121200000000
+ tid=40006, / tgid=40006 / pgid=40003: 1f7121200000000
+ tid=40009, / tgid=40006 / pgid=40003: 1f7121200000000
+ tid=40010, / tgid=40006 / pgid=40003: 1f7121200000000
+ tid=40011, / tgid=40006 / pgid=40003: 1f7121200000000
+
+Other prctl Notes
+~~~~~~~~~~~~~~~~~
+
+It is important to note that, on a ``clone(2)`` or ``fork(2)``, the child will
+be assigned a copy of the same ``cookie`` as its parent and thus in the same
+core scheduling group. Basically the default is that fork-only or threaded
+applications can share the cores of a processor. A new cookie can be created
+post clone/fork if such sharing is undesirable. An ``execve(2)`` will however,
+automatically assign a new cookie to a task as no reasonable assumptions can be
+made on the security of the new code.
+
+.. note:: The core-sharing granted with ``prctl(2)`` will be subject to
+ core-sharing restrictions specified by the CGroup interface. For example,
+ if tasks T1 and T2 are a part of 2 different tagged CGroups, then they will
+ not share a core even if ``prctl(2)`` is used to set a shared cookie.
+
+Design/Implementation
+---------------------
+Each task that is tagged is assigned a cookie internally in the kernel. As
+mentioned in `Usage`_, tasks with the same cookie value are assumed to trust
+each other and share a core.
+
+The basic idea is that, every schedule event tries to select tasks for all the
+siblings of a core such that all the selected tasks running on a core are
+trusted (same cookie) at any point in time. Kernel threads are assumed trusted.
+The idle task is considered special, as it trusts everything and everything
+trusts it.
+
+During a schedule() event on any sibling of a core, the highest priority task on
+the sibling's core is picked and assigned to the sibling calling schedule(), if
+the sibling has the task enqueued. For rest of the siblings in the core,
+highest priority task with the same cookie is selected if there is one runnable
+in their individual run queues. If a task with same cookie is not available,
+the idle task is selected. Idle task is globally trusted.
+
+Once a task has been selected for all the siblings in the core, an IPI is sent to
+siblings for whom a new task was selected. Siblings on receiving the IPI will
+switch to the new task immediately. If an idle task is selected for a sibling,
+then the sibling is considered to be in a `forced idle` state. I.e., it may
+have tasks on its on runqueue to run, however it will still have to run idle.
+More on this in the next section.
+
+Forced-idling of tasks
+----------------------
+The scheduler tries its best to find tasks that trust each other such that all
+tasks selected to be scheduled are of the highest priority in a core. However,
+it is possible that some runqueues had tasks that were incompatible with the
+highest priority ones in the core. Favoring security over fairness, one or more
+siblings could be forced to select a lower priority task if the highest
+priority task is not trusted with respect to the core wide highest priority
+task. If a sibling does not have a trusted task to run, it will be forced idle
+by the scheduler (idle thread is scheduled to run).
+
+When the highest priority task is selected to run, a reschedule-IPI is sent to
+the sibling to force it into idle. This results in 4 cases which need to be
+considered depending on whether a VM or a regular usermode process was running
+on either HT::
+
+ HT1 (attack) HT2 (victim)
+ A idle -> user space user space -> idle
+ B idle -> user space guest -> idle
+ C idle -> guest user space -> idle
+ D idle -> guest guest -> idle
+
+Note that for better performance, we do not wait for the destination CPU
+(victim) to enter idle mode. This is because the sending of the IPI would bring
+the destination CPU immediately into kernel mode from user space, or VMEXIT
+in the case of guests. At best, this would only leak some scheduler metadata
+which may not be worth protecting. It is also possible that the IPI is received
+too late on some architectures, but this has not been observed in the case of
+x86.
+
+Kernel protection from untrusted tasks
+--------------------------------------
+Entry into the kernel (syscall, IRQ or VMEXIT) needs protection. The scheduler
+on its own cannot protect the kernel executing concurrently with an untrusted
+task in a core. This is because the scheduler is unaware of interrupts/syscalls
+at scheduling time. To mitigate this, an IPI is sent to siblings on kernel
+entry. This IPI forces the sibling to enter kernel mode and wait before
+returning to user until all siblings of the core have left kernel mode. This
+process is also known as stunning. For good performance, an IPI is sent only
+to a sibling only if it is running a tagged task. If a sibling is running a
+kernel thread or is idle, no IPI is sent.
+
+The kernel protection feature is off by default. To protect the kernel, pass a
+comma separated list of what to protect to the ht_protect= kernel command line
+option. Possible values are irq, syscall and kvm.
+
+Note that an arch has to define the ``TIF_UNSAFE_RET`` thread info flag to be
+able to use kernel protection. Also, if protecting the kernel from a VM is
+desired, an arch should call kvm_exit_to_guest_mode() during ``VMENTER`` and
+kvm_exit_to_guest_mode() during ``VMEXIT``. Currently, x86 support both these.
+
+Other alternative ideas discussed for kernel protection are listed below just
+for completeness. They all have limitations:
+
+1. Changing interrupt affinities to a trusted core which does not execute untrusted tasks
+#########################################################################################
+By changing the interrupt affinities to a designated safe-CPU which runs
+only trusted tasks, IRQ data can be protected. One issue is this involves
+giving up a full CPU core of the system to run safe tasks. Another is that,
+per-cpu interrupts such as the local timer interrupt cannot have their
+affinity changed. Also, sensitive timer callbacks such as the random entropy timer
+can run in softirq on return from these interrupts and expose sensitive
+data. In the future, that could be mitigated by forcing softirqs into threaded
+mode by utilizing a mechanism similar to ``CONFIG_PREEMPT_RT``.
+
+Yet another issue with this is, for multiqueue devices with managed
+interrupts, the IRQ affinities cannot be changed; however it could be
+possible to force a reduced number of queues which would in turn allow to
+shield one or two CPUs from such interrupts and queue handling for the price
+of indirection.
+
+2. Running IRQs as threaded-IRQs
+################################
+This would result in forcing IRQs into the scheduler which would then provide
+the process-context mitigation. However, not all interrupts can be threaded.
+Also this does nothing about syscall entries.
+
+3. Kernel Address Space Isolation
+#################################
+System calls could run in a much restricted address space which is
+guaranteed not to leak any sensitive data. There are practical limitation in
+implementing this - the main concern being how to decide on an address space
+that is guaranteed to not have any sensitive data.
+
+4. Limited cookie-based protection
+##################################
+On a system call, change the cookie to the system trusted cookie and initiate a
+schedule event. This would be better than pausing all the siblings during the
+entire duration for the system call, but still would be a huge hit to the
+performance.
+
+Trust model
+-----------
+Core scheduling maintains trust relationships amongst groups of tasks by
+assigning the tag of them with the same cookie value.
+When a system with core scheduling boots, all tasks are considered to trust
+each other. This is because the core scheduler does not have information about
+trust relationships until userspace uses the above mentioned interfaces, to
+communicate them. In other words, all tasks have a default cookie value of 0.
+and are considered system-wide trusted. The stunning of siblings running
+cookie-0 tasks is also avoided.
+
+Once userspace uses the above mentioned interfaces to group sets of tasks, tasks
+within such groups are considered to trust each other, but do not trust those
+outside. Tasks outside the group also don't trust tasks within.
+
+coresched command line option
+-----------------------------
+The coresched kernel command line option can be used to:
+ - Keep coresched on even if system is not vulnerable x (``coresched=on``).
+ - Keep coresched off even if system is vulnerable (``coresched=off``).
+ - Keep coresched on only if system is vulnerable x (``coresched=secure``).
+
+The default is ``coresched=secure``. However a user who has a usecase that
+needs core-scheduling, such as improving performance of VMs by tagging vCPU
+threads, could pass ``coresched=on`` to force it on.
+
+Limitations in core-scheduling
+------------------------------
+Core scheduling tries to guarantee that only trusted tasks run concurrently on a
+core. But there could be small window of time during which untrusted tasks run
+concurrently or kernel could be running concurrently with a task not trusted by
+kernel.
+
+1. IPI processing delays
+########################
+Core scheduling selects only trusted tasks to run together. IPI is used to notify
+the siblings to switch to the new task. But there could be hardware delays in
+receiving of the IPI on some arch (on x86, this has not been observed). This may
+cause an attacker task to start running on a CPU before its siblings receive the
+IPI. Even though cache is flushed on entry to user mode, victim tasks on siblings
+may populate data in the cache and micro architectural buffers after the attacker
+starts to run and this is a possibility for data leak.
+
+Open cross-HT issues that core scheduling does not solve
+--------------------------------------------------------
+1. For MDS
+##########
+Core scheduling cannot protect against MDS attacks between an HT running in
+user mode and another running in kernel mode. Even though both HTs run tasks
+which trust each other, kernel memory is still considered untrusted. Such
+attacks are possible for any combination of sibling CPU modes (host or guest mode).
+
+2. For L1TF
+###########
+Core scheduling cannot protect against an L1TF guest attacker exploiting a
+guest or host victim. This is because the guest attacker can craft invalid
+PTEs which are not inverted due to a vulnerable guest kernel. The only
+solution is to disable EPT (Extended Page Tables).
+
+For both MDS and L1TF, if the guest vCPU is configured to not trust each
+other (by tagging separately), then the guest to guest attacks would go away.
+Or it could be a system admin policy which considers guest to guest attacks as
+a guest problem.
+
+Another approach to resolve these would be to make every untrusted task on the
+system to not trust every other untrusted task. While this could reduce
+parallelism of the untrusted tasks, it would still solve the above issues while
+allowing system processes (trusted tasks) to share a core.
+
+Use cases
+---------
+The main use case for Core scheduling is mitigating the cross-HT vulnerabilities
+with SMT enabled. There are other use cases where this feature could be used:
+
+- Isolating tasks that needs a whole core: Examples include realtime tasks, tasks
+ that uses SIMD instructions etc.
+- Gang scheduling: Requirements for a group of tasks that needs to be scheduled
+ together could also be realized using core scheduling. One example is vCPUs of
+ a VM.
+
+Future work
+-----------
+Skipping per-HT mitigations if task is trusted
+##############################################
+If core scheduling is enabled, by default all tasks trust each other as
+mentioned above. In such scenario, it may be desirable to skip the same-HT
+mitigations on return to the trusted user-mode to improve performance.
diff --git a/Documentation/admin-guide/hw-vuln/index.rst b/Documentation/admin-guide/hw-vuln/index.rst
index 21710f8609fe..361ccbbd9e54 100644
--- a/Documentation/admin-guide/hw-vuln/index.rst
+++ b/Documentation/admin-guide/hw-vuln/index.rst
@@ -16,3 +16,4 @@ are configurable at compile, boot or run time.
multihit.rst
special-register-buffer-data-sampling.rst
l1d_flush.rst
+ core-scheduling.rst
--
2.31.0.rc2.261.g7f71774620-goog
Powered by blists - more mailing lists