[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <01c9f635-7b2b-fc9c-3cf9-6d7f425d683e@foss.st.com>
Date: Fri, 19 Mar 2021 09:38:39 +0100
From: Alexandre TORGUE <alexandre.torgue@...s.st.com>
To: dillon min <dillon.minfei@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Ahmad Fatoum <a.fatoum@...gutronix.de>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
<linux@...linux.org.uk>, Vladimir Murzin <vladimir.murzin@....com>,
<afzal.mohd.ma@...il.com>, <gregkh@...uxfoundation.org>,
<erwan.leray@...com>, <erwan.leray@...s.st.com>,
<linux-serial@...r.kernel.org>, <lkp@...el.com>
Subject: Re: [PATCH v3 9/9] dt-bindings: serial: stm32: add phandle
'bluetooth' to fix dtbs_check warrning
Hi Dillon
On 3/19/21 5:28 AM, dillon min wrote:
> No changes, Just loop lkp in.
>
>
> Hi lkp,
>
> Sorry for the late reply, thanks for your report.
> This patch is to fix the build warning message.
>
> Thanks.
> Regards
>
> On Mon, Mar 15, 2021 at 5:45 PM <dillon.minfei@...il.com> wrote:
>>
>> From: dillon min <dillon.minfei@...il.com>
>>
>> when run make dtbs_check with 'bluetoothi brcm,bcm43438-bt'
>> dts enabled on stm32h7, there is a warrning popup:
>>
>>>> arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@...04800: 'bluetooth'
>> does not match any of the regexes: 'pinctrl-[0-9]+'
>>
>> to make dtbs_check happy, so add a phandle bluetooth
>>
>> Fixes: 500cdb23d608 ("ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board")
>> Signed-off-by: dillon min <dillon.minfei@...il.com>
>> Reported-by: kernel test robot <lkp@...el.com>
>> ---
>> Documentation/devicetree/bindings/serial/st,stm32-uart.yaml | 5 +++++
>> 1 file changed, 5 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
>> index 8631678283f9..5e674840e62d 100644
>> --- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
>> +++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
>> @@ -50,6 +50,11 @@ properties:
>> minItems: 1
>> maxItems: 2
>>
>> + bluetooth:
>> + type: object
>> + description: |
>> + phandles to the usart controller and bluetooth
>> +
Do we really need to add this "generic" property here ? You could test
without the "AditionalProperties:False".
Regards
Alex
>> # cts-gpios and rts-gpios properties can be used instead of 'uart-has-rtscts'
>> # or 'st,hw-flow-ctrl' (deprecated) for making use of any gpio pins for flow
>> # control instead of dedicated pins.
>> --
>> 1.9.1
>>
Powered by blists - more mailing lists