| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20210322131206.24887-2-a-govindraju@ti.com>
Date: Mon, 22 Mar 2021 18:42:04 +0530
From: Aswath Govindraju <a-govindraju@...com>
To: unlisted-recipients:; (no To-header on input)
CC: Vignesh Raghavendra <vigneshr@...com>,
Lokesh Vutla <lokeshvutla@...com>,
Kishon Vijay Abraham I <kishon@...com>,
Aswath Govindraju <a-govindraju@...com>,
Faiz Abbas <faiz_abbas@...com>, Sekhar Nori <nsekhar@...com>,
Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: [PATCH v7 1/3] arm64: dts: ti: k3-j7200: Add gpio nodes
From: Faiz Abbas <faiz_abbas@...com>
There are 4 instances of gpio modules in main domain:
gpio0, gpio2, gpio4 and gpio6
Groups are created to provide protection between different processor
virtual worlds. Each of these modules I/O pins are muxed within the
group. Exactly one module can be selected to control the corresponding
pin by selecting it in the pad mux configuration registers.
This group in main domain pins out 69 lines (5 banks). Add DT modes for
each module instance in the main domain.
Similar to the gpio groups in main domain, there is one gpio group in
wakeup domain with 2 module instances in it.
The gpio group pins out 72 pins (6 banks) of the first 85 gpio lines. Add
DT nodes for each module instance in the wakeup domain.
Signed-off-by: Faiz Abbas <faiz_abbas@...com>
Signed-off-by: Sekhar Nori <nsekhar@...com>
Signed-off-by: Aswath Govindraju <a-govindraju@...com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@...com>
---
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 72 +++++++++++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 34 +++++++++
2 files changed, 106 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 17477ab0fd8e..e60650a62b14 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -672,6 +672,78 @@
};
};
+ main_gpio0: gpio@...000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00600000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <145>, <146>, <147>, <148>,
+ <149>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <69>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 105 0>;
+ clock-names = "gpio";
+ };
+
+ main_gpio2: gpio@...000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00610000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <154>, <155>, <156>, <157>,
+ <158>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <69>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 107 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 107 0>;
+ clock-names = "gpio";
+ };
+
+ main_gpio4: gpio@...000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00620000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <163>, <164>, <165>, <166>,
+ <167>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <69>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 109 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 109 0>;
+ clock-names = "gpio";
+ };
+
+ main_gpio6: gpio@...000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x00630000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&main_gpio_intr>;
+ interrupts = <172>, <173>, <174>, <175>,
+ <176>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <69>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 111 0>;
+ clock-names = "gpio";
+ };
+
main_r5fss0: r5fss@...0000 {
compatible = "ti,j7200-r5fss";
ti,cluster-mode = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 359e3e8a8cd0..1dd5b30edc6c 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -107,6 +107,40 @@
ti,interrupt-ranges = <16 960 16>;
};
+ wkup_gpio0: gpio@...10000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x42110000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&wkup_gpio_intr>;
+ interrupts = <103>, <104>, <105>, <106>, <107>, <108>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <85>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 113 0>;
+ clock-names = "gpio";
+ };
+
+ wkup_gpio1: gpio@...00000 {
+ compatible = "ti,j721e-gpio", "ti,keystone-gpio";
+ reg = <0x00 0x42100000 0x00 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&wkup_gpio_intr>;
+ interrupts = <112>, <113>, <114>, <115>, <116>, <117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ ti,ngpio = <85>;
+ ti,davinci-gpio-unbanked = <0>;
+ power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 114 0>;
+ clock-names = "gpio";
+ };
+
mcu_navss: bus@...80000 {
compatible = "simple-mfd";
#address-cells = <2>;
--
2.17.1
Powered by blists - more mailing lists