[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CADRPPNR=xy_oBZFS+hmO1k+uu2ckFyrK9EUP77N3buU5XpuHrw@mail.gmail.com>
Date: Mon, 22 Mar 2021 18:12:06 -0500
From: Li Yang <leoyang.li@....com>
To: Michael Walle <michael@...le.cc>
Cc: "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>, lkml <linux-kernel@...r.kernel.org>,
Shawn Guo <shawnguo@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Sahil Malhotra <sahil.malhotra@....com>,
Guillaume Tucker <guillaume.tucker@...labora.com>,
"kernelci.org bot" <bot@...nelci.org>
Subject: Re: [PATCH] arm64: dts: ls1028a: fix optee node
On Thu, Mar 18, 2021 at 3:36 AM Michael Walle <michael@...le.cc> wrote:
>
> Don't enable the optee node in the SoC include. It is an optional
> component and actually, if enabled, breaks boards which doesn't have it.
Hi Shawn,
Shall we make this a general rule? I see quite a few SoC dtsi files
are having the optee node enabled by default.
Regards,
Leo
>
> This reverts commit 48787485f8de ("arm64: dts: ls1028a: enable optee
> node") and enables the node per board, assuming the intend of the
> original author was to enable OPTEE for the LS1028A-RDB and the
> LS1028A-QDS.
>
> Fixes: 48787485f8de ("arm64: dts: ls1028a: enable optee node")
> Reported-by: Guillaume Tucker <guillaume.tucker@...labora.com>
> Reported-by: "kernelci.org bot" <bot@...nelci.org>
> Tested-by: Michael Walle <michael@...le.cc>
> Signed-off-by: Michael Walle <michael@...le.cc>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 4 ++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 ++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 3 ++-
> 3 files changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index fbcba9cb8503..060d3c79244d 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -327,6 +327,10 @@
> status = "okay";
> };
>
> +&optee {
> + status = "okay";
> +};
> +
> &sai1 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index 41ae6e7675ba..1bdf0104d492 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -274,6 +274,10 @@
> status = "okay";
> };
>
> +&optee {
> + status = "okay";
> +};
> +
> &sai4 {
> status = "okay";
> };
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index 50d277eb2a54..e2007ebacd69 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -92,9 +92,10 @@
> };
>
> firmware {
> - optee {
> + optee: optee {
> compatible = "linaro,optee-tz";
> method = "smc";
> + status = "disabled";
> };
> };
>
> --
> 2.20.1
>
Powered by blists - more mailing lists