[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20210322082628.10371-1-chenhui.zhang@axis.com>
Date: Mon, 22 Mar 2021 16:26:27 +0800
From: Hermes Zhang <chenhui.zhang@...s.com>
To: Pavel Machek <pavel@....cz>, Dan Murphy <dmurphy@...com>
CC: <kernel@...s.com>, Hermes Zhang <chenhuiz@...s.com>,
<linux-kernel@...r.kernel.org>, <linux-leds@...r.kernel.org>
Subject: [PATCH] leds: leds-multi-gpio: Add multiple GPIOs LED driver
From: Hermes Zhang <chenhuiz@...s.com>
Introduce a new multiple GPIOs LED driver. This LED will made of
multiple GPIOs (up to 8) and will map different brightness to different
GPIOs states which defined in dts file.
Signed-off-by: Hermes Zhang <chenhuiz@...s.com>
---
drivers/leds/Kconfig | 12 +++
drivers/leds/Makefile | 1 +
drivers/leds/leds-multi-gpio.c | 140 +++++++++++++++++++++++++++++++++
3 files changed, 153 insertions(+)
create mode 100644 drivers/leds/leds-multi-gpio.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index b6742b4231bf..e3ff84080192 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -370,6 +370,18 @@ config LEDS_GPIO
defined as platform devices and/or OpenFirmware platform devices.
The code to use these bindings can be selected below.
+config LEDS_MULTI_GPIO
+ tristate "LED Support for multiple GPIOs LED"
+ depends on LEDS_CLASS
+ depends on GPIOLIB
+ help
+ This option enables support for a multiple GPIOs LED. Such LED is made
+ of multiple GPIOs and could change the brightness by setting different
+ states of the GPIOs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called leds-multi-gpio.
+
config LEDS_LP3944
tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index 2a698df9da57..984201ec5375 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
obj-$(CONFIG_LEDS_DA9052) += leds-da9052.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+obj-$(CONFIG_LEDS_MULTI_GPIO) += leds-multi-gpio.o
obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_INTEL_SS4200) += leds-ss4200.o
diff --git a/drivers/leds/leds-multi-gpio.c b/drivers/leds/leds-multi-gpio.c
new file mode 100644
index 000000000000..54d92c81a476
--- /dev/null
+++ b/drivers/leds/leds-multi-gpio.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Axis Communications AB
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+
+#define MAX_GPIO_NUM 8
+
+struct multi_gpio_led_priv {
+ struct led_classdev cdev;
+
+ struct gpio_descs *gpios;
+
+ u8 *states;
+ int nr_states;
+};
+
+
+static void multi_gpio_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct multi_gpio_led_priv *priv;
+ int idx;
+
+ DECLARE_BITMAP(values, MAX_GPIO_NUM);
+
+ priv = container_of(led_cdev, struct multi_gpio_led_priv, cdev);
+
+ idx = (value - LED_OFF) * priv->nr_states / (LED_FULL + 1);
+
+ values[0] = priv->states[idx];
+
+ gpiod_set_array_value(priv->gpios->ndescs, priv->gpios->desc,
+ priv->gpios->info, values);
+}
+
+static int multi_gpio_led_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct multi_gpio_led_priv *priv = NULL;
+ int ret;
+ const char *state = NULL;
+ struct led_init_data init_data = {};
+
+ priv = devm_kzalloc(dev, sizeof(struct multi_gpio_led_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->gpios = devm_gpiod_get_array(dev, "led", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->gpios))
+ return PTR_ERR(priv->gpios);
+
+ if (priv->gpios->ndescs >= MAX_GPIO_NUM) {
+ dev_err(dev, "Too many GPIOs\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_count_u8_elems(node, "led-states");
+ if (ret < 0)
+ return ret;
+
+ priv->nr_states = ret;
+ priv->states = devm_kzalloc(dev, sizeof(*priv->states) * priv->nr_states, GFP_KERNEL);
+ if (!priv->states)
+ return -ENOMEM;
+
+ ret = of_property_read_u8_array(node, "led-states", priv->states, priv->nr_states);
+ if (ret)
+ return ret;
+
+ priv->cdev.max_brightness = LED_FULL;
+ priv->cdev.default_trigger = of_get_property(node, "linux,default-trigger", NULL);
+ priv->cdev.brightness_set = multi_gpio_led_set;
+
+ init_data.fwnode = of_fwnode_handle(node);
+
+ ret = devm_led_classdev_register_ext(dev, &priv->cdev, &init_data);
+ if (ret < 0)
+ return ret;
+
+ of_property_read_string(node, "default-state", &state);
+ if (!strcmp(state, "on"))
+ multi_gpio_led_set(&priv->cdev, LED_FULL);
+ else
+ multi_gpio_led_set(&priv->cdev, LED_OFF);
+
+ platform_set_drvdata(pdev, priv);
+
+ return 0;
+}
+
+static void multi_gpio_led_shutdown(struct platform_device *pdev)
+{
+ struct multi_gpio_led_priv *priv = platform_get_drvdata(pdev);
+
+ multi_gpio_led_set(&priv->cdev, LED_OFF);
+}
+
+static int multi_gpio_led_remove(struct platform_device *pdev)
+{
+ multi_gpio_led_shutdown(pdev);
+
+ return 0;
+}
+
+static const struct of_device_id of_multi_gpio_led_match[] = {
+ { .compatible = "multi-gpio-led", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, of_multi_gpio_led_match);
+
+static struct platform_driver multi_gpio_led_driver = {
+ .probe = multi_gpio_led_probe,
+ .remove = multi_gpio_led_remove,
+ .shutdown = multi_gpio_led_shutdown,
+ .driver = {
+ .name = "multi-gpio-led",
+ .of_match_table = of_multi_gpio_led_match,
+ },
+};
+
+module_platform_driver(multi_gpio_led_driver);
+
+MODULE_AUTHOR("Hermes Zhang <chenhui.zhang@...s.com>");
+MODULE_DESCRIPTION("Multiple GPIOs LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:leds-multi-gpio");
--
2.20.1
Powered by blists - more mailing lists