linux-kernel - Re: [PATCH v5 2/7] pwm: pca9685: Support hardware readout

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20210322114826.ahwhbqxjxfg3nmrf@pengutronix.de>
Date:   Mon, 22 Mar 2021 12:48:26 +0100
From:   Uwe Kleine-König <u.kleine-koenig@...gutronix.de>
To:     Andy Shevchenko <andy.shevchenko@...il.com>
Cc:     Thierry Reding <thierry.reding@...il.com>,
        Clemens Gruber <clemens.gruber@...ruber.com>,
        Sven Van Asbroeck <thesven73@...il.com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        "linux-pwm@...r.kernel.org" <linux-pwm@...r.kernel.org>
Subject: Re: [PATCH v5 2/7] pwm: pca9685: Support hardware readout

On Mon, Mar 22, 2021 at 01:40:57PM +0200, Andy Shevchenko wrote:
> On Mon, Mar 22, 2021 at 1:22 PM Uwe Kleine-König
> <u.kleine-koenig@...gutronix.de> wrote:
> > On Mon, Mar 22, 2021 at 11:38:40AM +0200, Andy Shevchenko wrote:
> > > On Monday, March 22, 2021, Thierry Reding <thierry.reding@...il.com> wrote:
> > > > On Fri, Jan 29, 2021 at 09:37:47PM +0100, Clemens Gruber wrote:
> > > > > Thierry: Would you accept it if we continue to reset the registers in
> > > > > .probe?
> > > >
> > > > Yes, I think it's fine to continue to reset the registers since that's
> > > > basically what the driver already does. It'd be great if you could
> > > > follow up with a patch that removes the reset and leaves the hardware in
> > > > whatever state the bootloader has set up. Then we can take that patch
> > > > for a ride and see if there are any complains about it breaking. If
> > > > there are we can always try to fix them, but as a last resort we can
> > > > also revert, which then may be something we have to live with. But I
> > > > think we should at least try to make this consistent with how other
> > > > drivers do this so that people don't stumble over this particular
> > > > driver's
> > >
> > > I guess we may miss (a PCB / silicon design flaw or warm boot case) when
> > > boot loader left device completely untouched and device either in wrong
> > > state because if failed reset (saw this on PCA9555 which has a
> > > corresponding errata), or simply we have done a warm reset of the system.
> > > So, we also have to understand how to properly exit.
> >
> > I don't think that not resetting is a real problem. My argumentation
> > goes as follows:
> >
> > When the PWM driver is loaded and the PWM configuration is invalid, it
> > was already invalid for the time between power up (or warm start) and
> > PWM driver load time. Then it doesn't really hurt to keep the PWM
> > in this invalid state for a little moment longer until the consumer of
> > the PWM becomes active.
> 
> But this won't work in the cases when we have a chip with a shared
> settings for period and/or duty cycle. You will never have a user come
> due to -EBUSY.

That's wrong, the first consumer to enable the PWM (in software) is
supposed to be able to change the settings.

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |

Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)