linux-kernel - Re: [PATCHv3 3/6] media: v4l UAPI: add ROI auto-controls flags

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CANiDSCujVZy93W=HW317R5rEzEtdaaR8XwA_tu-ZT4eFe1VSrQ@mail.gmail.com>
Date:   Wed, 24 Mar 2021 08:28:54 +0100
From:   Ricardo Ribalda <ribalda@...omium.org>
To:     Sergey Senozhatsky <senozhatsky@...omium.org>
Cc:     Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        Tomasz Figa <tfiga@...omium.org>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Hans Verkuil <hverkuil-cisco@...all.nl>,
        Linux Media Mailing List <linux-media@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCHv3 3/6] media: v4l UAPI: add ROI auto-controls flags

HI Sergey

On Wed, Mar 24, 2021 at 3:22 AM Sergey Senozhatsky
<senozhatsky@...omium.org> wrote:
>
> On (21/03/23 17:04), Ricardo Ribalda wrote:
> > On Fri, Mar 19, 2021 at 6:53 AM Sergey Senozhatsky
> > <senozhatsky@...omium.org> wrote:
> > >
> > > UVC 1.5 defines the following Region Of Interest auto controls:
> > >
> > > D0: Auto Exposure
> > > D1: Auto Iris
> > > D2: Auto White Balance
> > > D3: Auto Focus
> > > D4: Auto Face Detect
> > > D5: Auto Detect and Track
> > > D6: Image Stabilization
> > > D7: Higher Quality
> > > D8 – D15: Reserved, set to zero
> > >
> > > Signed-off-by: Sergey Senozhatsky <senozhatsky@...omium.org>
> > > ---
> > >  include/uapi/linux/v4l2-common.h | 10 ++++++++++
> > >  1 file changed, 10 insertions(+)
> > >
> > > diff --git a/include/uapi/linux/v4l2-common.h b/include/uapi/linux/v4l2-common.h
> > > index 3651ebb8cb23..34f1c262d6aa 100644
> > > --- a/include/uapi/linux/v4l2-common.h
> > > +++ b/include/uapi/linux/v4l2-common.h
> > > @@ -92,6 +92,16 @@
> > >  #define V4L2_SEL_FLAG_LE               (1 << 1)
> > >  #define V4L2_SEL_FLAG_KEEP_CONFIG      (1 << 2)
> > >
> >
> > Are you sure that you do not want to start with 1<<3, there might be
> > some hardware that support LE/SE
>
> How the hardware's going to support this? There is simply no way to
> pass these flags to the firmware, the values already overlap with
> auto-controls. So I guess these flags are for the driver (C code).
> uvcvideo driver is not doing any "lesser or equal rectangle" magic
> for ROI. No such thing is defined by UVC spec.

The driver can implement se/le.

>
> I can move these flags to entirely different value range and do
> remapping to uvc auto-controls values in uvcvideo.
I think that is more correct in this case. Yes it is annoying, but if
more devices support this....



-- 
Ricardo Ribalda