[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0ad79f93fa4d9e9be2b81c4673f1962dfa0d28f3.1616566395.git.matti.vaittinen@fi.rohmeurope.com>
Date: Wed, 24 Mar 2021 09:29:39 +0200
From: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
To: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>,
Matti Vaittinen <mazziesaccount@...il.com>
Cc: Lee Jones <lee.jones@...aro.org>, Rob Herring <robh+dt@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Matti Vaittinen <matti.vaittinen@...rohmeurope.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-power@...rohmeurope.com
Subject: [PATCH v4 10/16] regulator: helpers: Export helper voltage listing
Some drivers need to translate voltage values to selectors prior regulator
registration. Currently a regulator_desc based list_voltages helper is only
exported for regulators using the linear_ranges. Export similar helper also
for regulators using simple linear mapping.
Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
---
Changes since v3:
- No changes
drivers/regulator/helpers.c | 36 +++++++++++++++++++++++++-------
include/linux/regulator/driver.h | 2 ++
2 files changed, 30 insertions(+), 8 deletions(-)
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index f42b394a0c46..3e19ecbf7267 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -508,6 +508,33 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
}
EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range);
+/**
+ * regulator_desc_list_voltage_linear - List voltages with simple calculation
+ *
+ * @desc: Regulator desc for regulator which volatges are to be listed
+ * @selector: Selector to convert into a voltage
+ *
+ * Regulators with a simple linear mapping between voltages and
+ * selectors can set min_uV and uV_step in the regulator descriptor
+ * and then use this function prior regulator registration to list
+ * the voltages. This is useful when voltages need to be listed during
+ * device-tree parsing.
+ */
+int regulator_desc_list_voltage_linear(const struct regulator_desc *desc,
+ unsigned int selector)
+{
+ if (selector >= desc->n_voltages)
+ return -EINVAL;
+
+ if (selector < desc->linear_min_sel)
+ return 0;
+
+ selector -= desc->linear_min_sel;
+
+ return desc->min_uV + (desc->uV_step * selector);
+}
+EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear);
+
/**
* regulator_list_voltage_linear - List voltages with simple calculation
*
@@ -521,14 +548,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range);
int regulator_list_voltage_linear(struct regulator_dev *rdev,
unsigned int selector)
{
- if (selector >= rdev->desc->n_voltages)
- return -EINVAL;
- if (selector < rdev->desc->linear_min_sel)
- return 0;
-
- selector -= rdev->desc->linear_min_sel;
-
- return rdev->desc->min_uV + (rdev->desc->uV_step * selector);
+ return regulator_desc_list_voltage_linear(rdev->desc, selector);
}
EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index d7c77ee370f3..39a540111645 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -543,4 +543,6 @@ void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc,
unsigned int selector);
+int regulator_desc_list_voltage_linear(const struct regulator_desc *desc,
+ unsigned int selector);
#endif
--
2.25.4
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
Powered by blists - more mailing lists