[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210324133705.2664873-1-arnd@kernel.org>
Date: Wed, 24 Mar 2021 14:36:52 +0100
From: Arnd Bergmann <arnd@...nel.org>
To: Alex Deucher <alexander.deucher@....com>,
Christian König <christian.koenig@....com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>
Cc: Arnd Bergmann <arnd@...db.de>,
Rasmus Villemoes <linux@...musvillemoes.dk>,
Jinzhou Su <Jinzhou.Su@....com>, Huang Rui <ray.huang@....com>,
amd-gfx@...ts.freedesktop.org, dri-devel@...ts.freedesktop.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] amdgpu: securedisplay: simplify i2c hexdump output
From: Arnd Bergmann <arnd@...db.de>
A previous fix I did left a rather complicated loop in
amdgpu_securedisplay_debugfs_write() for what could be expressed in a
simple sprintf, as Rasmus pointed out.
This drops the leading 0x for each byte, but is otherwise
much nicer.
Suggested-by: Rasmus Villemoes <linux@...musvillemoes.dk>
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c | 11 +++--------
1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c
index 69d7f6bff5d4..fc3ddd7aa6f0 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_securedisplay.c
@@ -92,9 +92,7 @@ static ssize_t amdgpu_securedisplay_debugfs_write(struct file *f, const char __u
struct drm_device *dev = adev_to_drm(adev);
uint32_t phy_id;
uint32_t op;
- int i;
char str[64];
- char i2c_output[256];
int ret;
if (*pos || size > sizeof(str) - 1)
@@ -136,12 +134,9 @@ static ssize_t amdgpu_securedisplay_debugfs_write(struct file *f, const char __u
ret = psp_securedisplay_invoke(psp, TA_SECUREDISPLAY_COMMAND__SEND_ROI_CRC);
if (!ret) {
if (securedisplay_cmd->status == TA_SECUREDISPLAY_STATUS__SUCCESS) {
- int pos = 0;
- memset(i2c_output, 0, sizeof(i2c_output));
- for (i = 0; i < TA_SECUREDISPLAY_I2C_BUFFER_SIZE; i++)
- pos += sprintf(i2c_output + pos, " 0x%X",
- securedisplay_cmd->securedisplay_out_message.send_roi_crc.i2c_buf[i]);
- dev_info(adev->dev, "SECUREDISPLAY: I2C buffer out put is :%s\n", i2c_output);
+ dev_info(adev->dev, "SECUREDISPLAY: I2C buffer out put is: %*ph\n",
+ TA_SECUREDISPLAY_I2C_BUFFER_SIZE,
+ securedisplay_cmd->securedisplay_out_message.send_roi_crc.i2c_buf);
} else {
psp_securedisplay_parse_resp_status(psp, securedisplay_cmd->status);
}
--
2.29.2
Powered by blists - more mailing lists