| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 25 Mar 2021 14:19:23 -0400
From: Sean Paul <sean@...rly.run>
To: Xin Ji <xji@...logixsemi.com>
Cc: Robert Foss <robert.foss@...aro.org>,
Nicolas Boichat <drinkcat@...gle.com>,
Andrzej Hajda <a.hajda@...sung.com>,
devel@...verdev.osuosl.org,
Jernej Skrabec <jernej.skrabec@...l.net>,
Sheng Pan <span@...logixsemi.com>,
Jonas Karlman <jonas@...boo.se>,
David Airlie <airlied@...ux.ie>,
Bernie Liang <bliang@...logixsemi.com>,
Neil Armstrong <narmstrong@...libre.com>,
Zhen Li <zhenli@...logixsemi.com>,
LKML <linux-kernel@...r.kernel.org>,
dri-devel <dri-devel@...ts.freedesktop.org>,
Vasily Khoruzhick <anarsoul@...il.com>,
Boris Brezillon <boris.brezillon@...labora.com>,
Torsten Duwe <duwe@....de>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Hsin-Yi Wang <hsinyi@...omium.org>,
Sam Ravnborg <sam@...nborg.org>,
Dan Carpenter <dan.carpenter@...cle.com>,
Marek Szyprowski <m.szyprowski@...sung.com>
Subject: Re: [PATCH v6 4/5] drm/bridge: anx7625: add HDCP support
On Fri, Mar 19, 2021 at 2:35 AM Xin Ji <xji@...logixsemi.com> wrote:
>
> Add HDCP feature, enable HDCP function through chip internal key
> and downstream's capability.
>
> Signed-off-by: Xin Ji <xji@...logixsemi.com>
> ---
> drivers/gpu/drm/bridge/analogix/anx7625.c | 147 ++++++++++++++++++++++
> drivers/gpu/drm/bridge/analogix/anx7625.h | 36 ++++++
> 2 files changed, 183 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c
> index 8c514b46d361..b424a570effa 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.c
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c
> @@ -633,6 +633,150 @@ static int anx7625_dpi_config(struct anx7625_data *ctx)
> return ret;
> }
>
> +static int anx7625_aux_dpcd_read(struct anx7625_data *ctx,
> + u8 addrh, u8 addrm, u8 addrl,
> + u8 len, u8 *buf)
> +{
> + struct device *dev = &ctx->client->dev;
> + int ret;
> + u8 cmd;
> +
> + if (len > MAX_DPCD_BUFFER_SIZE) {
> + DRM_DEV_ERROR(dev, "exceed aux buffer len.\n");
> + return -E2BIG;
> + }
> +
> + cmd = ((len - 1) << 4) | 0x09;
> +
> + /* Set command and length */
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_COMMAND, cmd);
> +
> + /* Set aux access address */
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_7_0, addrl);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_15_8, addrm);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_ADDR_19_16, addrh);
> +
> + /* Enable aux access */
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_CTRL_STATUS, AP_AUX_CTRL_OP_EN);
> +
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "cannot access aux related register.\n");
> + return -EIO;
> + }
> +
> + usleep_range(2000, 2100);
> +
> + ret = wait_aux_op_finish(ctx);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "aux IO error: wait aux op finish.\n");
> + return ret;
> + }
> +
> + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
> + AP_AUX_BUFF_START, len, buf);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "read dpcd register failed\n");
> + return -EIO;
> + }
> +
> + return 0;
> +}
> +
> +static int anx7625_read_flash_status(struct anx7625_data *ctx)
> +{
> + return anx7625_reg_read(ctx, ctx->i2c.rx_p0_client, R_RAM_CTRL);
> +}
> +
> +static int anx7625_hdcp_key_probe(struct anx7625_data *ctx)
> +{
> + int ret, val;
> + struct device *dev = &ctx->client->dev;
> + u8 ident[32];
> +
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + FLASH_ADDR_HIGH, 0x91);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + FLASH_ADDR_LOW, 0xA0);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "IO error : set key flash address.\n");
> + return ret;
> + }
> +
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + FLASH_LEN_HIGH, (FLASH_BUF_LEN - 1) >> 8);
> + ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + FLASH_LEN_LOW, (FLASH_BUF_LEN - 1) & 0xFF);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "IO error : set key flash len.\n");
> + return ret;
> + }
> +
> + ret = anx7625_reg_write(ctx, ctx->i2c.rx_p0_client,
> + R_FLASH_RW_CTRL, FLASH_READ);
> + ret |= readx_poll_timeout(anx7625_read_flash_status,
> + ctx, val,
> + ((val & FLASH_DONE) || (val < 0)),
> + 2000,
> + 2000 * 150);
> + if (ret) {
> + DRM_DEV_ERROR(dev, "flash read access fail!\n");
> + return -EIO;
> + }
> +
> + ret = anx7625_reg_block_read(ctx, ctx->i2c.rx_p0_client,
> + FLASH_BUF_BASE_ADDR,
> + FLASH_BUF_LEN, ident);
> + if (ret < 0) {
> + DRM_DEV_ERROR(dev, "read flash data fail!\n");
> + return -EIO;
> + }
> +
> + if (ident[29] == 0xFF && ident[30] == 0xFF && ident[31] == 0xFF)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
> +static int anx7625_hdcp_setting(struct anx7625_data *ctx)
> +{
> + u8 bcap;
> + int ret;
> + struct device *dev = &ctx->client->dev;
> +
> + ret = anx7625_hdcp_key_probe(ctx);
> + if (ret) {
> + DRM_DEV_DEBUG_DRIVER(dev, "disable HDCP by config\n");
> + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> + 0xee, 0x9f);
> + }
> +
> + anx7625_aux_dpcd_read(ctx, 0x06, 0x80, 0x28, 1, &bcap);
> + if (!(bcap & 0x01)) {
> + DRM_DEV_DEBUG_DRIVER(dev, "bcap(0x%x) not support HDCP 1.4.\n",
> + bcap);
> + return anx7625_write_and(ctx, ctx->i2c.rx_p1_client,
> + 0xee, 0x9f);
> + }
> +
> + DRM_DEV_DEBUG_DRIVER(dev, "enable HDCP 1.4\n");
> +
> + ret = anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xee, 0x20);
> +
> + /* Try auth flag */
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xec, 0x10);
> + /* Interrupt for DRM */
> + ret |= anx7625_write_or(ctx, ctx->i2c.rx_p1_client, 0xff, 0x01);
> + if (ret < 0)
> + DRM_DEV_ERROR(dev, "fail to enable HDCP\n");
> +
> + return ret;
> +}
> +
> static void anx7625_dp_start(struct anx7625_data *ctx)
> {
> int ret;
> @@ -643,6 +787,9 @@ static void anx7625_dp_start(struct anx7625_data *ctx)
> return;
> }
>
> + /* HDCP config */
> + anx7625_hdcp_setting(ctx);
You should really use the "Content Protection" property to
enable/disable HDCP instead of force-enabling it at all times.
Sean
> +
> if (ctx->pdata.is_dpi)
> ret = anx7625_dpi_config(ctx);
> else
> diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.h b/drivers/gpu/drm/bridge/analogix/anx7625.h
> index beee95da2155..c6f93e4df0ed 100644
> --- a/drivers/gpu/drm/bridge/analogix/anx7625.h
> +++ b/drivers/gpu/drm/bridge/analogix/anx7625.h
> @@ -154,9 +154,45 @@
>
> #define I2C_ADDR_7E_FLASH_CONTROLLER 0x7E
>
> +#define FLASH_SRAM_SEL 0x00
> +#define SRAM_ADDR_HIGH 0x01
> +#define SRAM_ADDR_LOW 0x02
> +#define SRAM_LEN_HIGH 0x03
> +#define SRAM_LEN_LOW 0x04
> #define FLASH_LOAD_STA 0x05
> #define FLASH_LOAD_STA_CHK BIT(7)
>
> +#define R_RAM_CTRL 0x05
> +/* bit positions */
> +#define FLASH_DONE BIT(7)
> +#define BOOT_LOAD_DONE BIT(6)
> +#define CRC_OK BIT(5)
> +#define LOAD_DONE BIT(4)
> +#define O_RW_DONE BIT(3)
> +#define FUSE_BUSY BIT(2)
> +#define DECRYPT_EN BIT(1)
> +#define LOAD_START BIT(0)
> +
> +#define FLASH_ADDR_HIGH 0x0F
> +#define FLASH_ADDR_LOW 0x10
> +#define FLASH_LEN_HIGH 0x31
> +#define FLASH_LEN_LOW 0x32
> +
> +#define R_FLASH_RW_CTRL 0x33
> +/* bit positions */
> +#define READ_DELAY_SELECT BIT(7)
> +#define GENERAL_INSTRUCTION_EN BIT(6)
> +#define FLASH_ERASE_EN BIT(5)
> +#define RDID_READ_EN BIT(4)
> +#define REMS_READ_EN BIT(3)
> +#define WRITE_STATUS_EN BIT(2)
> +#define FLASH_READ BIT(1)
> +#define FLASH_WRITE BIT(0)
> +
> +#define FLASH_BUF_BASE_ADDR 0x60
> +#define FLASH_BUF_LEN 0x20
> +#define FLASH_KEY_OFFSET 0x8000
> +
> #define XTAL_FRQ_SEL 0x3F
> /* bit field positions */
> #define XTAL_FRQ_SEL_POS 5
> --
> 2.25.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@...ts.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Powered by blists - more mailing lists