[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd081] [ 0.000000] Linux version 5.10.4 (robimarko@onlbuilder9) (aarch64-linux-gnu-gcc (Debian 6.3.0-18) 6.3.0 20170516, GNU ld (GNU Binutils for Debian) 2.28) #1 SMP PREEMPT Thu Mar 11 10:22:09 UTC 2021 [ 0.000000] Machine model: delta,tn48m [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000f0512000 (options '') [ 0.000000] printk: bootconsole [uart8250] enabled [ 0.000000] efi: UEFI not found. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader! [ 0.000000] cma: Reserved 32 MiB at 0x00000000be000000 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x23efdb100-0x23efdcfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff] [ 0.000000] DMA32 [mem 0x0000000040000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff] [ 0.000000] node 0: [mem 0x0000000004200000-0x00000000bfffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000023fffffff] [ 0.000000] On node 0 totalpages: 2096640 [ 0.000000] DMA zone: 4096 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 261632 pages, LIFO batch:63 [ 0.000000] DMA32 zone: 8192 pages used for memmap [ 0.000000] DMA32 zone: 524288 pages, LIFO batch:63 [ 0.000000] Normal zone: 20480 pages used for memmap [ 0.000000] Normal zone: 1310720 pages, LIFO batch:63 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: Trusted OS resident on physical CPU 0x0 [ 0.000000] psci: SMC Calling Convention v1.1 [ 0.000000] percpu: Embedded 32 pages/cpu s94104 r8192 d28776 u131072 [ 0.000000] pcpu-alloc: s94104 r8192 d28776 u131072 alloc=32*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Detected PIPT I-cache on CPU0 [ 0.000000] CPU features: detected: EL2 vector hardening [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Spectre-v2 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2063872 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: console=ttyS0,115200 earlycon=uart8250,mmio32,0xf0512000 onl_platform=arm64-delta-tn48m-poe-r0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x000000003bfff000-0x000000003ffff000] (64MB) [ 0.000000] Memory: 8071364K/8386560K available (18112K kernel code, 4006K rwdata, 9464K rodata, 9536K init, 539K bss, 282428K reserved, 32768K cma-reserved) [ 0.000000] ftrace: allocating 60579 entries in 237 pages [ 0.000000] ftrace: allocated 237 pages with 6 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GIC: Adjusting CPU interface base to 0x00000000f022f000 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:160, num:32) [ 0.000000] GICv2m: range[mem 0xf0280000-0xf0280fff], SPI[160:191] [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:192, num:32) [ 0.000000] GICv2m: range[mem 0xf0290000-0xf0290fff], SPI[192:223] [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:224, num:32) [ 0.000000] GICv2m: range[mem 0xf02a0000-0xf02a0fff], SPI[224:255] [ 0.000000] GICv2m: DT overriding V2M MSI_TYPER (base:256, num:32) [ 0.000000] GICv2m: range[mem 0xf02b0000-0xf02b0fff], SPI[256:287] [ 0.000000] random: get_random_bytes called from start_kernel+0x39c/0x528 with crng_init=0 [ 0.000000] arch_timer: cp15 timer(s) running at 25.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c40939b5, max_idle_ns: 440795202646 ns [ 0.000003] sched_clock: 56 bits at 25MHz, resolution 40ns, wraps every 4398046511100ns [ 0.009007] Console: colour dummy device 80x25 [ 0.013713] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000) [ 0.024654] pid_max: default: 32768 minimum: 301 [ 0.029638] LSM: Security Framework initializing [ 0.034638] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.042690] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.052194] rcu: Hierarchical SRCU implementation. [ 0.058926] EFI services will not be available. [ 0.063883] smp: Bringing up secondary CPUs ... [ 0.069210] Detected PIPT I-cache on CPU1 [ 0.069264] CPU1: Booted secondary processor 0x0000000001 [0x410fd081] [ 0.069815] Detected PIPT I-cache on CPU2 [ 0.069849] CPU2: Booted secondary processor 0x0000000100 [0x410fd081] [ 0.070377] Detected PIPT I-cache on CPU3 [ 0.070402] CPU3: Booted secondary processor 0x0000000101 [0x410fd081] [ 0.070463] smp: Brought up 1 node, 4 CPUs [ 0.108075] SMP: Total of 4 processors activated. [ 0.113075] CPU features: detected: 32-bit EL0 Support [ 0.118519] CPU features: detected: CRC32 instructions [ 0.123945] CPU features: detected: 32-bit EL1 Support [ 0.142744] CPU: All CPU(s) started at EL2 [ 0.147058] alternatives: patching kernel code [ 0.153668] devtmpfs: initialized [ 0.159780] KASLR disabled due to lack of seed [ 0.164776] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.175027] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.182979] pinctrl core: initialized pinctrl subsystem [ 0.189148] DMI not present or invalid. [ 0.193535] NET: Registered protocol family 16 [ 0.199109] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.206879] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.215344] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.223794] audit: initializing netlink subsys (disabled) [ 0.229594] audit: type=2000 audit(0.148:1): state=initialized audit_enabled=0 res=1 [ 0.230115] thermal_sys: Registered thermal governor 'step_wise' [ 0.238224] cpuidle: using governor menu [ 0.248829] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.255994] ASID allocator initialised with 32768 entries [ 0.262321] Serial: AMBA PL011 UART driver [ 0.286551] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.293597] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages [ 0.300643] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.307697] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages [ 0.936090] cryptd: max_cpu_qlen set to 1000 [ 0.961127] ACPI: Interpreter disabled. [ 0.965889] iommu: Default domain type: Translated [ 0.971190] vgaarb: loaded [ 0.974230] SCSI subsystem initialized [ 0.978276] libata version 3.00 loaded. [ 0.978421] usbcore: registered new interface driver usbfs [ 0.984216] usbcore: registered new interface driver hub [ 0.989833] usbcore: registered new device driver usb [ 0.995586] pps_core: LinuxPPS API ver. 1 registered [ 1.000840] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 1.010510] PTP clock support registered [ 1.014705] EDAC MC: Ver: 3.0.0 [ 1.018659] FPGA manager framework [ 1.022294] Advanced Linux Sound Architecture Driver Initialized. [ 1.029224] clocksource: Switched to clocksource arch_sys_counter [ 1.392874] VFS: Disk quotas dquot_6.6.0 [ 1.397057] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.404410] pnp: PnP ACPI: disabled [ 1.411831] NET: Registered protocol family 2 [ 1.416809] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 1.425864] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 1.434458] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 1.443123] TCP: Hash tables configured (established 65536 bind 65536) [ 1.450114] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.457383] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 1.465269] NET: Registered protocol family 1 [ 1.470172] RPC: Registered named UNIX socket transport module. [ 1.476417] RPC: Registered udp transport module. [ 1.481387] RPC: Registered tcp transport module. [ 1.486357] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.493146] PCI: CLS 0 bytes, default 64 [ 1.497410] Trying to unpack rootfs image as initramfs... [ 1.992039] Freeing initrd memory: 14208K [ 1.996658] hw perfevents: unable to count PMU IRQs [ 2.001825] hw perfevents: /ap806/config-space@f0000000/pmu: failed to register PMU devices! [ 2.010942] kvm [1]: IPA Size Limit: 44 bits [ 2.016303] kvm [1]: vgic interrupt IRQ9 [ 2.020540] kvm [1]: Hyp mode initialized successfully [ 2.052332] Initialise system trusted keyrings [ 2.057140] workingset: timestamp_bits=44 max_order=21 bucket_order=0 [ 2.064354] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.070722] NFS: Registering the id_resolver key type [ 2.076050] Key type id_resolver registered [ 2.080473] Key type id_legacy registered [ 2.084722] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.091799] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. [ 2.098368] 9p: Installing v9fs 9p2000 file system support [ 2.131377] Key type asymmetric registered [ 2.135665] Asymmetric key parser 'x509' registered [ 2.140840] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 2.148586] io scheduler mq-deadline registered [ 2.153373] io scheduler kyber registered [ 2.193046] armada-ap806-pinctrl f06f4000.system-controller:pinctrl: registered pinctrl driver [ 2.202569] armada-cp110-pinctrl f2440000.system-controller:pinctrl: registered pinctrl driver [ 2.212915] gpio gpiochip0: (f06f4000.system-controller:gpio@1040): created GPIO range 0->19 ==> f06f4000.system-controller:pinctrl PIN 0->19 [ 2.213034] gpio gpiochip0: (f06f4000.system-controller:gpio@1040): added GPIO chardev (254:0) [ 2.213073] gpio gpiochip0: registered GPIOs 0 to 19 on f06f4000.system-controller:gpio@1040 [ 2.213307] gpio gpiochip1: (f2440000.system-controller:gpio@100): created GPIO range 0->31 ==> f2440000.system-controller:pinctrl PIN 0->31 [ 2.213398] gpio gpiochip1: (f2440000.system-controller:gpio@100): added GPIO chardev (254:1) [ 2.213431] gpio gpiochip1: registered GPIOs 32 to 63 on f2440000.system-controller:gpio@100 [ 2.213654] gpio gpiochip2: (f2440000.system-controller:gpio@140): created GPIO range 0->30 ==> f2440000.system-controller:pinctrl PIN 32->62 [ 2.213742] gpio gpiochip2: (f2440000.system-controller:gpio@140): added GPIO chardev (254:2) [ 2.213774] gpio gpiochip2: registered GPIOs 64 to 94 on f2440000.system-controller:gpio@140 [ 2.215886] EINJ: ACPI disabled. [ 2.223868] mv_xor_v2 f0400000.xor: Marvell Version 2 XOR driver [ 2.230652] mv_xor_v2 f0420000.xor: Marvell Version 2 XOR driver [ 2.237485] mv_xor_v2 f0440000.xor: Marvell Version 2 XOR driver [ 2.244273] mv_xor_v2 f0460000.xor: Marvell Version 2 XOR driver [ 2.251198] mv_xor_v2 f26a0000.xor: Marvell Version 2 XOR driver [ 2.258039] mv_xor_v2 f26c0000.xor: Marvell Version 2 XOR driver [ 2.269805] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.277726] printk: console [ttyS0] disabled [ 2.282226] dw-apb-uart f0512000.serial: GPIO lookup for consumer rs485-term [ 2.282230] dw-apb-uart f0512000.serial: using device tree for GPIO lookup [ 2.282249] of_get_named_gpiod_flags: can't parse 'rs485-term-gpios' property of node '/ap806/config-space@f0000000/serial@512000[0]' [ 2.282260] of_get_named_gpiod_flags: can't parse 'rs485-term-gpio' property of node '/ap806/config-space@f0000000/serial@512000[0]' [ 2.282267] dw-apb-uart f0512000.serial: using lookup tables for GPIO lookup [ 2.282272] dw-apb-uart f0512000.serial: No GPIO consumer rs485-term found [ 2.282304] f0512000.serial: ttyS0 at MMIO 0xf0512000 (irq = 18, base_baud = 12500000) is a 16550A [ 2.291768] printk: console [ttyS0] enabled [ 2.300388] printk: bootconsole [uart8250] disabled [ 2.311265] SuperH (H)SCI(F) driver initialized [ 2.316199] msm_serial: driver initialized [ 2.321194] omap_rng f2760000.trng: Random Number Generator ver. 203b34c [ 2.321490] random: fast init done [ 2.331480] random: crng init done [ 2.335761] brd: module loaded [ 2.343629] loop: module loaded [ 2.347958] ahci f2540000.sata: supply ahci not found, using dummy regulator [ 2.355147] ahci f2540000.sata: supply phy not found, using dummy regulator [ 2.362913] platform f2540000.sata:sata-port@0: supply target not found, using dummy regulator [ 2.372114] platform f2540000.sata:sata-port@1: supply target not found, using dummy regulator [ 2.380946] ahci f2540000.sata: masking port_map 0x3 -> 0x3 [ 2.386599] ahci f2540000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode [ 2.395177] ahci f2540000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.404125] scsi host0: ahci [ 2.407325] scsi host1: ahci [ 2.410337] ata1: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x100 irq 36 [ 2.418298] ata2: SATA max UDMA/133 mmio [mem 0xf2540000-0xf256ffff] port 0x180 irq 36 [ 2.428852] spi-nor spi1.0: w25q128 (16384 Kbytes) [ 2.431065] tpm_tis_spi spi0.0: 2.0 TPM (device-id 0x1B, rev-id 16) [ 2.433705] 3 fixed-partitions partitions found on MTD device spi1.0 [ 2.442335] tpm tpm0: A TPM error (256) occurred attempting the self test [ 2.446364] Creating 3 MTD partitions on "spi1.0": [ 2.446373] 0x000000000000-0x0000003f0000 : "uboot" [ 2.453190] tpm tpm0: starting up the TPM manually [ 2.458146] mtd mtd0: GPIO lookup for consumer wp [ 2.467721] mtd mtd0: using device tree for GPIO lookup [ 2.467740] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/cp0/config-space@f2000000/spi@700600/spi-flash@0/partitions/partition@0[0]' [ 2.467755] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/cp0/config-space@f2000000/spi@700600/spi-flash@0/partitions/partition@0[0]' [ 2.467760] mtd mtd0: using lookup tables for GPIO lookup [ 2.467765] mtd mtd0: No GPIO consumer wp found [ 2.469532] 0x0000003f0000-0x000000400000 : "uboot-env" [ 2.474903] mtd mtd1: GPIO lookup for consumer wp [ 2.474907] mtd mtd1: using device tree for GPIO lookup [ 2.474923] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/cp0/config-space@f2000000/spi@700600/spi-flash@0/partitions/partition@3f0000[0]' [ 2.474938] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/cp0/config-space@f2000000/spi@700600/spi-flash@0/partitions/partition@3f0000[0]' [ 2.474943] mtd mtd1: using lookup tables for GPIO lookup [ 2.474947] mtd mtd1: No GPIO consumer wp found [ 2.476341] 0x000000400000-0x000001000000 : "ONIE" [ 2.481282] mtd mtd2: GPIO lookup for consumer wp [ 2.481286] mtd mtd2: using device tree for GPIO lookup [ 2.481304] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/cp0/config-space@f2000000/spi@700600/spi-flash@0/partitions/partition@400000[0]' [ 2.481318] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/cp0/config-space@f2000000/spi@700600/spi-flash@0/partitions/partition@400000[0]' [ 2.481324] mtd mtd2: using lookup tables for GPIO lookup [ 2.481328] mtd mtd2: No GPIO consumer wp found [ 2.485046] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 2.492945] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld . All Rights Reserved. [ 2.503374] mdio_bus fixed-0: GPIO lookup for consumer reset [ 2.503380] mdio_bus fixed-0: using lookup tables for GPIO lookup [ 2.503386] mdio_bus fixed-0: No GPIO consumer reset found [ 2.503402] libphy: Fixed MDIO Bus: probed [ 2.508311] tun: Universal TUN/TAP device driver, 1.6 [ 2.513927] thunder_xcv, ver 1.0 [ 2.517192] thunder_bgx, ver 1.0 [ 2.520473] nicpf, ver 1.0 [ 2.524020] hclge is initializing [ 2.527397] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version [ 2.534661] hns3: Copyright (c) 2017 Huawei Corporation. [ 2.540038] e1000: Intel(R) PRO/1000 Network Driver [ 2.544944] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.550744] e1000e: Intel(R) PRO/1000 Network Driver [ 2.555735] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.561708] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.567134] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.572750] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 2.579049] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 2.585343] mdio_bus f212a200.mdio-mii: GPIO lookup for consumer reset [ 2.585347] mdio_bus f212a200.mdio-mii: using device tree for GPIO lookup [ 2.585361] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/cp0/config-space@f2000000/mdio@12a200[0]' [ 2.585372] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/cp0/config-space@f2000000/mdio@12a200[0]' [ 2.585378] mdio_bus f212a200.mdio-mii: using lookup tables for GPIO lookup [ 2.585382] mdio_bus f212a200.mdio-mii: No GPIO consumer reset found [ 2.585385] libphy: orion_mdio_bus: probed [ 2.591151] mdio_bus f212a200.mdio-mii:00: GPIO lookup for consumer reset [ 2.591156] mdio_bus f212a200.mdio-mii:00: using device tree for GPIO lookup [ 2.591173] of_get_named_gpiod_flags: can't parse 'reset-gpios' property of node '/cp0/config-space@f2000000/mdio@12a200/ethernet-phy@1[0]' [ 2.591184] of_get_named_gpiod_flags: can't parse 'reset-gpio' property of node '/cp0/config-space@f2000000/mdio@12a200/ethernet-phy@1[0]' [ 2.591189] mdio_bus f212a200.mdio-mii:00: using lookup tables for GPIO lookup [ 2.591194] mdio_bus f212a200.mdio-mii:00: No GPIO consumer reset found [ 2.592531] mvpp2 f2000000.ethernet: using 8 per-cpu buffers [ 2.607610] sky2: driver version 1.30 [ 2.611827] hdlc: HDLC support module revision 1.22 [ 2.616791] usbcore: registered new interface driver asix [ 2.622270] usbcore: registered new interface driver ax88179_178a [ 2.628412] usbcore: registered new interface driver cdc_ether [ 2.634313] usbcore: registered new interface driver net1080 [ 2.640023] usbcore: registered new interface driver cdc_subset [ 2.645996] usbcore: registered new interface driver zaurus [ 2.651623] usbcore: registered new interface driver cdc_ncm [ 2.657427] VFIO - User Level meta-driver version: 0.3 [ 2.663752] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.670355] ehci-pci: EHCI PCI platform driver [ 2.674854] ehci-platform: EHCI generic platform driver [ 2.680235] ehci-orion: EHCI orion driver [ 2.684358] ehci-exynos: EHCI Exynos driver [ 2.688640] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.694862] ohci-pci: OHCI PCI platform driver [ 2.699352] ohci-platform: OHCI generic platform driver [ 2.704696] ohci-exynos: OHCI Exynos driver [ 2.709307] xhci-hcd f2500000.usb3: xHCI Host Controller [ 2.714661] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 1 [ 2.722273] xhci-hcd f2500000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 [ 2.731574] xhci-hcd f2500000.usb3: irq 37, io mem 0xf2500000 [ 2.737793] hub 1-0:1.0: USB hub found [ 2.740493] ata2: SATA link down (SStatus 0 SControl 300) [ 2.741589] hub 1-0:1.0: 1 port detected [ 2.751111] xhci-hcd f2500000.usb3: xHCI Host Controller [ 2.756461] xhci-hcd f2500000.usb3: new USB bus registered, assigned bus number 2 [ 2.763990] xhci-hcd f2500000.usb3: Host supports USB 3.0 SuperSpeed [ 2.770413] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.778809] hub 2-0:1.0: USB hub found [ 2.782600] hub 2-0:1.0: 1 port detected [ 2.786884] xhci-hcd f2510000.usb3: xHCI Host Controller [ 2.792237] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 3 [ 2.799840] xhci-hcd f2510000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010 [ 2.809141] xhci-hcd f2510000.usb3: irq 38, io mem 0xf2510000 [ 2.815307] hub 3-0:1.0: USB hub found [ 2.819099] hub 3-0:1.0: 1 port detected [ 2.823193] xhci-hcd f2510000.usb3: xHCI Host Controller [ 2.828540] xhci-hcd f2510000.usb3: new USB bus registered, assigned bus number 4 [ 2.836067] xhci-hcd f2510000.usb3: Host supports USB 3.0 SuperSpeed [ 2.842490] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.850869] hub 4-0:1.0: USB hub found [ 2.854662] hub 4-0:1.0: 1 port detected [ 2.859104] usbcore: registered new interface driver usb-storage [ 2.865240] usbcore: registered new interface driver usbserial_generic [ 2.871817] usbserial: USB Serial support registered for generic [ 2.877951] usbcore: registered new interface driver ftdi_sio [ 2.883738] usbserial: USB Serial support registered for FTDI USB Serial Device [ 2.891172] usbcore: registered new interface driver mos7720 [ 2.896878] usbserial: USB Serial support registered for Moschip 2 port adapter [ 2.904243] usbcore: registered new interface driver mos7840 [ 2.905286] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.909942] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver [ 2.916248] ata1.00: ATA-9: M.2 (S42) 3TE7, S20730A, max UDMA/133 [ 2.924642] usbcore: registered new interface driver mxuport [ 2.930748] ata1.00: 53742528 sectors, multi 16: LBA48 NCQ (depth 32) [ 2.930859] ata1.00: configured for UDMA/133 [ 2.936448] usbserial: USB Serial support registered for MOXA UPort [ 2.943142] scsi 0:0:0:0: Direct-Access ATA M.2 (S42) 3TE7 30A PQ: 0 ANSI: 5 [ 2.947231] usbcore: registered new interface driver pl2303 [ 2.954028] sd 0:0:0:0: [sda] 53742528 512-byte logical blocks: (27.5 GB/25.6 GiB) [ 2.961661] usbserial: USB Serial support registered for pl2303 [ 2.967333] sd 0:0:0:0: [sda] Write Protect is off [ 2.974897] usbcore: registered new interface driver usb_serial_simple [ 2.980814] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.980850] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.985641] usbserial: USB Serial support registered for carelink [ 3.007414] usbserial: USB Serial support registered for zio [ 3.008131] sda: sda1 sda2 sda3 sda4 [ 3.013124] usbserial: USB Serial support registered for funsoft [ 3.017706] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 3.022846] usbserial: USB Serial support registered for flashloader [ 3.034742] usbserial: USB Serial support registered for google [ 3.040702] usbserial: USB Serial support registered for libtransistor [ 3.047273] usbserial: USB Serial support registered for vivopay [ 3.053320] usbserial: USB Serial support registered for moto_modem [ 3.059632] usbserial: USB Serial support registered for motorola_tetra [ 3.066289] usbserial: USB Serial support registered for novatel_gps [ 3.072685] usbserial: USB Serial support registered for hp4x [ 3.078471] usbserial: USB Serial support registered for suunto [ 3.084429] usbserial: USB Serial support registered for siemens_mpi [ 3.092771] armada38x-rtc f2284000.rtc: registered as rtc0 [ 3.098315] armada38x-rtc f2284000.rtc: setting system clock to 2065-01-22T03:47:20 UTC (2999821640) [ 3.108343] i2c /dev entries driver [ 3.113262] at24 1-0056: supply vcc not found, using dummy regulator [ 3.119757] at24 1-0056: GPIO lookup for consumer wp [ 3.119761] at24 1-0056: using device tree for GPIO lookup [ 3.119777] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/cp0/config-space@f2000000/i2c@701000/at24@56[0]' [ 3.119790] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/cp0/config-space@f2000000/i2c@701000/at24@56[0]' [ 3.119796] at24 1-0056: using lookup tables for GPIO lookup [ 3.119800] at24 1-0056: No GPIO consumer wp found [ 3.120390] at24 1-0056: 8192 byte 24c64 EEPROM, writable, 1 bytes/write [ 3.128419] i2c-mux-gpio i2cmux: GPIO lookup for consumer mux [ 3.128425] i2c-mux-gpio i2cmux: using device tree for GPIO lookup [ 3.128442] of_get_named_gpiod_flags: parsed 'mux-gpios' property of node '/i2cmux[0]' - status (0) [ 3.128470] i2c-mux-gpio i2cmux: GPIO lookup for consumer mux [ 3.128474] i2c-mux-gpio i2cmux: using device tree for GPIO lookup [ 3.128487] of_get_named_gpiod_flags: parsed 'mux-gpios' property of node '/i2cmux[1]' - status (0) [ 3.128638] i2c i2c-2: Added multiplexed i2c bus 3 [ 3.133608] i2c i2c-2: Added multiplexed i2c bus 4 [ 3.138543] i2c i2c-2: Added multiplexed i2c bus 5 [ 3.143486] i2c i2c-2: Added multiplexed i2c bus 6 [ 3.148312] i2c-mux-gpio i2cmux: 4 port mux on mv64xxx_i2c adapter adapter [ 3.171018] sdhci: Secure Digital Host Controller Interface driver [ 3.177263] sdhci: Copyright(c) Pierre Ossman [ 3.181966] Synopsys Designware Multimedia Card Interface Driver [ 3.188699] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.195418] xenon-sdhci f06e0000.sdhci: GPIO lookup for consumer wp [ 3.195423] xenon-sdhci f06e0000.sdhci: using device tree for GPIO lookup [ 3.195443] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ap806/config-space@f0000000/sdhci@6e0000[0]' [ 3.195461] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ap806/config-space@f0000000/sdhci@6e0000[0]' [ 3.195466] xenon-sdhci f2780000.sdhci: GPIO lookup for consumer wp [ 3.195470] xenon-sdhci f06e0000.sdhci: using lookup tables for GPIO lookup [ 3.195473] xenon-sdhci f2780000.sdhci: using device tree for GPIO lookup [ 3.195475] xenon-sdhci f06e0000.sdhci: No GPIO consumer wp found [ 3.195491] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/cp0/config-space@f2000000/sdhci@780000[0]' [ 3.195504] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/cp0/config-space@f2000000/sdhci@780000[0]' [ 3.195510] xenon-sdhci f2780000.sdhci: using lookup tables for GPIO lookup [ 3.195514] xenon-sdhci f2780000.sdhci: No GPIO consumer wp found [ 3.195784] ledtrig-cpu: registered to indicate activity on CPUs [ 3.203113] usbcore: registered new interface driver usbhid [ 3.208723] usbhid: USB HID core driver [ 3.221047] mmc1: SDHCI controller on f2780000.sdhci [f2780000.sdhci] using ADMA 64-bit [ 3.229146] mmc0: SDHCI controller on f06e0000.sdhci [f06e0000.sdhci] using ADMA 64-bit [ 3.231203] netem: version 1.3 [ 3.240535] Initializing XFRM netlink socket [ 3.244931] NET: Registered protocol family 10 [ 3.249918] Segment Routing with IPv6 [ 3.253652] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 3.259927] NET: Registered protocol family 17 [ 3.264411] NET: Registered protocol family 15 [ 3.268910] Bridge firewalling registered [ 3.272969] 8021q: 802.1Q VLAN Support v1.8 [ 3.277234] 9pnet: Installing 9P2000 support [ 3.281569] Key type dns_resolver registered [ 3.286106] registered taskstats version 1 [ 3.290241] Loading compiled-in X.509 certificates [ 3.298670] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available [ 3.308036] armada8k-pcie f2600000.pcie: host bridge /cp0/pcie@f2600000 ranges: [ 3.315418] armada8k-pcie f2600000.pcie: IO 0x00fb000000..0x00fb0effff -> 0x00fb000000 [ 3.323911] armada8k-pcie f2600000.pcie: MEM 0x00f6000000..0x00f7ffffff -> 0x00f6000000 [ 3.332399] armada8k-pcie f2600000.pcie: MEM 0x00f9000000..0x00f90fffff -> 0x00f9000000 [ 3.340968] armada8k-pcie f2600000.pcie: Link up [ 3.345678] armada8k-pcie f2600000.pcie: PCI host bridge to bus 0000:00 [ 3.352329] pci_bus 0000:00: root bus resource [bus 00-ff] [ 3.357844] pci_bus 0000:00: root bus resource [io 0x0000-0xeffff] (bus address [0xfb000000-0xfb0effff]) [ 3.367458] pci_bus 0000:00: root bus resource [mem 0xf6000000-0xf7ffffff] [ 3.374368] pci_bus 0000:00: root bus resource [mem 0xf9000000-0xf90fffff] [ 3.381305] pci 0000:00:00.0: [11ab:0110] type 01 class 0x060400 [ 3.387353] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x000fffff] [ 3.393718] pci 0000:00:00.0: supports D1 D2 [ 3.398013] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 3.404893] pci 0000:01:00.0: [11ab:c80c] type 00 class 0x028000 [ 3.411129] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xc00fffff 64bit pref] [ 3.418505] pci 0000:01:00.0: reg 0x18: [mem 0xc0800000-0xc0ffffff 64bit pref] [ 3.425875] pci 0000:01:00.0: reg 0x20: [mem 0xc1000000-0xc13fffff 64bit pref] [ 3.433636] pci 0000:01:00.0: supports D1 D2 [ 3.450012] pci 0000:00:00.0: BAR 15: assigned [mem 0xf6000000-0xf6dfffff pref] [ 3.457366] pci 0000:00:00.0: BAR 0: assigned [mem 0xf6e00000-0xf6efffff] [ 3.464194] pci 0000:01:00.0: BAR 2: assigned [mem 0xf6000000-0xf67fffff 64bit pref] [ 3.472049] pci 0000:01:00.0: BAR 4: assigned [mem 0xf6800000-0xf6bfffff 64bit pref] [ 3.479907] pci 0000:01:00.0: BAR 0: assigned [mem 0xf6c00000-0xf6cfffff 64bit pref] [ 3.487761] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 3.493019] pci 0000:00:00.0: bridge window [mem 0xf6000000-0xf6dfffff pref] [ 3.500485] pcieport 0000:00:00.0: PME: Signaling with IRQ 45 [ 3.506417] pcieport 0000:00:00.0: AER: enabled with IRQ 45 [ 3.513019] mdio_bus i2c:sfp-49: GPIO lookup for consumer reset [ 3.513026] mdio_bus i2c:sfp-49: using lookup tables for GPIO lookup [ 3.513031] mdio_bus i2c:sfp-49: No GPIO consumer reset found [ 3.513036] libphy: SFP I2C Bus: probed [ 3.516905] sfp sfp-49: GPIO lookup for consumer mod-def0 [ 3.516909] sfp sfp-49: using device tree for GPIO lookup [ 3.516923] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-49[0]' [ 3.516936] sfp sfp-49: No GPIO consumer mod-def0 found [ 3.517994] mdio_bus i2c:sfp-50: GPIO lookup for consumer reset [ 3.518000] mdio_bus i2c:sfp-50: using lookup tables for GPIO lookup [ 3.518005] mdio_bus i2c:sfp-50: No GPIO consumer reset found [ 3.518009] libphy: SFP I2C Bus: probed [ 3.521877] sfp sfp-50: GPIO lookup for consumer mod-def0 [ 3.521880] sfp sfp-50: using device tree for GPIO lookup [ 3.521894] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-50[0]' [ 3.521905] sfp sfp-50: No GPIO consumer mod-def0 found [ 3.522823] mdio_bus i2c:sfp-51: GPIO lookup for consumer reset [ 3.522828] mdio_bus i2c:sfp-51: using lookup tables for GPIO lookup [ 3.522832] mdio_bus i2c:sfp-51: No GPIO consumer reset found [ 3.522836] libphy: SFP I2C Bus: probed [ 3.526707] sfp sfp-51: GPIO lookup for consumer mod-def0 [ 3.526710] sfp sfp-51: using device tree for GPIO lookup [ 3.526725] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-51[0]' [ 3.526736] sfp sfp-51: No GPIO consumer mod-def0 found [ 3.527648] mdio_bus i2c:sfp-52: GPIO lookup for consumer reset [ 3.527654] mdio_bus i2c:sfp-52: using lookup tables for GPIO lookup [ 3.527658] mdio_bus i2c:sfp-52: No GPIO consumer reset found [ 3.527662] libphy: SFP I2C Bus: probed [ 3.531530] sfp sfp-52: GPIO lookup for consumer mod-def0 [ 3.531533] sfp sfp-52: using device tree for GPIO lookup [ 3.531547] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-52[0]' [ 3.531558] sfp sfp-52: No GPIO consumer mod-def0 found [ 3.533059] mvpp2 f2000000.ethernet: using 8 per-cpu buffers [ 3.556144] mvpp2 f2000000.ethernet eth0: Using firmware node mac address 18:be:92:13:c0:82 [ 3.579593] mdio_bus i2c:sfp-49: GPIO lookup for consumer reset [ 3.579602] mdio_bus i2c:sfp-49: using lookup tables for GPIO lookup [ 3.579606] mdio_bus i2c:sfp-49: No GPIO consumer reset found [ 3.579611] libphy: SFP I2C Bus: probed [ 3.583497] sfp sfp-49: GPIO lookup for consumer mod-def0 [ 3.583501] sfp sfp-49: using device tree for GPIO lookup [ 3.583516] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-49[0]' [ 3.583530] sfp sfp-49: No GPIO consumer mod-def0 found [ 3.584505] mdio_bus i2c:sfp-50: GPIO lookup for consumer reset [ 3.584511] mdio_bus i2c:sfp-50: using lookup tables for GPIO lookup [ 3.584515] mdio_bus i2c:sfp-50: No GPIO consumer reset found [ 3.584519] libphy: SFP I2C Bus: probed [ 3.588408] sfp sfp-50: GPIO lookup for consumer mod-def0 [ 3.588412] sfp sfp-50: using device tree for GPIO lookup [ 3.588426] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-50[0]' [ 3.588438] sfp sfp-50: No GPIO consumer mod-def0 found [ 3.589395] mdio_bus i2c:sfp-51: GPIO lookup for consumer reset [ 3.589401] mdio_bus i2c:sfp-51: using lookup tables for GPIO lookup [ 3.589405] mdio_bus i2c:sfp-51: No GPIO consumer reset found [ 3.589409] libphy: SFP I2C Bus: probed [ 3.593272] sfp sfp-51: GPIO lookup for consumer mod-def0 [ 3.593275] sfp sfp-51: using device tree for GPIO lookup [ 3.593289] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-51[0]' [ 3.593300] sfp sfp-51: No GPIO consumer mod-def0 found [ 3.594203] mdio_bus i2c:sfp-52: GPIO lookup for consumer reset [ 3.594209] mdio_bus i2c:sfp-52: using lookup tables for GPIO lookup [ 3.594213] mdio_bus i2c:sfp-52: No GPIO consumer reset found [ 3.594217] libphy: SFP I2C Bus: probed [ 3.598089] sfp sfp-52: GPIO lookup for consumer mod-def0 [ 3.598093] sfp sfp-52: using device tree for GPIO lookup [ 3.598107] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-52[0]' [ 3.598118] sfp sfp-52: No GPIO consumer mod-def0 found [ 3.599044] mdio_bus i2c:sfp-49: GPIO lookup for consumer reset [ 3.599050] mdio_bus i2c:sfp-49: using lookup tables for GPIO lookup [ 3.599054] mdio_bus i2c:sfp-49: No GPIO consumer reset found [ 3.599058] libphy: SFP I2C Bus: probed [ 3.602933] sfp sfp-49: GPIO lookup for consumer mod-def0 [ 3.602937] sfp sfp-49: using device tree for GPIO lookup [ 3.602951] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-49[0]' [ 3.602963] sfp sfp-49: No GPIO consumer mod-def0 found [ 3.603866] mdio_bus i2c:sfp-50: GPIO lookup for consumer reset [ 3.603871] mdio_bus i2c:sfp-50: using lookup tables for GPIO lookup [ 3.603875] mdio_bus i2c:sfp-50: No GPIO consumer reset found [ 3.603879] libphy: SFP I2C Bus: probed [ 3.607756] sfp sfp-50: GPIO lookup for consumer mod-def0 [ 3.607760] sfp sfp-50: using device tree for GPIO lookup [ 3.607773] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-50[0]' [ 3.607785] sfp sfp-50: No GPIO consumer mod-def0 found [ 3.608684] mdio_bus i2c:sfp-51: GPIO lookup for consumer reset [ 3.608689] mdio_bus i2c:sfp-51: using lookup tables for GPIO lookup [ 3.608694] mdio_bus i2c:sfp-51: No GPIO consumer reset found [ 3.608697] libphy: SFP I2C Bus: probed [ 3.612566] sfp sfp-51: GPIO lookup for consumer mod-def0 [ 3.612570] sfp sfp-51: using device tree for GPIO lookup [ 3.612584] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-51[0]' [ 3.612594] sfp sfp-51: No GPIO consumer mod-def0 found [ 3.613516] mdio_bus i2c:sfp-52: GPIO lookup for consumer reset [ 3.613522] mdio_bus i2c:sfp-52: using lookup tables for GPIO lookup [ 3.613526] mdio_bus i2c:sfp-52: No GPIO consumer reset found [ 3.613530] libphy: SFP I2C Bus: probed [ 3.617394] sfp sfp-52: GPIO lookup for consumer mod-def0 [ 3.617398] sfp sfp-52: using device tree for GPIO lookup [ 3.617411] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-52[0]' [ 3.617421] sfp sfp-52: No GPIO consumer mod-def0 found [ 3.618405] ALSA device list: [ 3.621418] No soundcards found. [ 3.633820] Freeing unused kernel memory: 9536K [ 3.641350] Run /init as init process [ 3.645030] with arguments: [ 3.645033] /init [ 3.645036] with environment: [ 3.645039] HOME=/ [ 3.645042] TERM=linux [ 3.645045] onl_platform=arm64-delta-tn48m-poe-r0 [ 5.963793] mvpp2 f2000000.ethernet ma1: renamed from eth0 [ 11.053591] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 11.076480] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 11.095922] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null) [ 11.103061] ext4 filesystem being mounted at /mnt/onl/boot supports timestamps until 2038 (0x7fffffff) [ 11.121716] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 18.032058] mvpp2 f2000000.ethernet ma1: PHY [f212a200.mdio-mii:00] driver [Marvell 88E1510] (irq=POLL) [ 18.042704] mvpp2 f2000000.ethernet ma1: configuring for phy/sgmii link mode [ 20.238866] EXT4-fs (sda4): re-mounted. Opts: (null) [ 28.209966] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 28.260186] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 28.923537] arm64_delta_tn48m_poe_psu: loading out-of-tree module taints kernel. [ 28.946235] gpiochip_find_base: found new base at 500 [ 28.946392] gpio gpiochip3: (0-0041): added GPIO chardev (254:3) [ 28.946432] gpio gpiochip3: registered GPIOs 500 to 511 on 0-0041 [ 28.947316] mdio_bus i2c:sfp-49: GPIO lookup for consumer reset [ 28.947322] mdio_bus i2c:sfp-49: using lookup tables for GPIO lookup [ 28.947327] mdio_bus i2c:sfp-49: No GPIO consumer reset found [ 28.947332] libphy: SFP I2C Bus: probed [ 28.951273] sfp sfp-49: GPIO lookup for consumer mod-def0 [ 28.951277] sfp sfp-49: using device tree for GPIO lookup [ 28.951311] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-49[0]' [ 28.951336] of_get_named_gpiod_flags: parsed 'mod-def0-gpio' property of node '/sfp-49[0]' - status (0) [ 28.951352] sfp sfp-49: GPIO lookup for consumer los [ 28.951356] sfp sfp-49: using device tree for GPIO lookup [ 28.951364] of_get_named_gpiod_flags: can't parse 'los-gpios' property of node '/sfp-49[0]' [ 28.951376] of_get_named_gpiod_flags: parsed 'los-gpio' property of node '/sfp-49[0]' - status (0) [ 28.951381] sfp sfp-49: GPIO lookup for consumer tx-fault [ 28.951385] sfp sfp-49: using device tree for GPIO lookup [ 28.951393] of_get_named_gpiod_flags: can't parse 'tx-fault-gpios' property of node '/sfp-49[0]' [ 28.951401] of_get_named_gpiod_flags: can't parse 'tx-fault-gpio' property of node '/sfp-49[0]' [ 28.951407] sfp sfp-49: using lookup tables for GPIO lookup [ 28.951411] sfp sfp-49: No GPIO consumer tx-fault found [ 28.951414] sfp sfp-49: GPIO lookup for consumer tx-disable [ 28.951417] sfp sfp-49: using device tree for GPIO lookup [ 28.951426] of_get_named_gpiod_flags: can't parse 'tx-disable-gpios' property of node '/sfp-49[0]' [ 28.951436] of_get_named_gpiod_flags: parsed 'tx-disable-gpio' property of node '/sfp-49[0]' - status (0) [ 28.951441] gpio-502 (tx-disable): no flags found for tx-disable [ 28.951446] sfp sfp-49: GPIO lookup for consumer rate-select0 [ 28.951449] sfp sfp-49: using device tree for GPIO lookup [ 28.951457] of_get_named_gpiod_flags: can't parse 'rate-select0-gpios' property of node '/sfp-49[0]' [ 28.951464] of_get_named_gpiod_flags: can't parse 'rate-select0-gpio' property of node '/sfp-49[0]' [ 28.951469] sfp sfp-49: using lookup tables for GPIO lookup [ 28.951473] sfp sfp-49: No GPIO consumer rate-select0 found [ 28.951480] sfp sfp-49: Host maximum power 1.0W [ 28.958156] mdio_bus i2c:sfp-50: GPIO lookup for consumer reset [ 28.958164] mdio_bus i2c:sfp-50: using lookup tables for GPIO lookup [ 28.958168] mdio_bus i2c:sfp-50: No GPIO consumer reset found [ 28.958173] libphy: SFP I2C Bus: probed [ 28.962077] sfp sfp-50: GPIO lookup for consumer mod-def0 [ 28.962081] sfp sfp-50: using device tree for GPIO lookup [ 28.962101] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-50[0]' [ 28.962121] of_get_named_gpiod_flags: parsed 'mod-def0-gpio' property of node '/sfp-50[0]' - status (0) [ 28.962133] sfp sfp-50: GPIO lookup for consumer los [ 28.962137] sfp sfp-50: using device tree for GPIO lookup [ 28.962146] of_get_named_gpiod_flags: can't parse 'los-gpios' property of node '/sfp-50[0]' [ 28.962157] of_get_named_gpiod_flags: parsed 'los-gpio' property of node '/sfp-50[0]' - status (0) [ 28.962167] sfp sfp-50: GPIO lookup for consumer tx-fault [ 28.962171] sfp sfp-50: using device tree for GPIO lookup [ 28.962179] of_get_named_gpiod_flags: can't parse 'tx-fault-gpios' property of node '/sfp-50[0]' [ 28.962188] of_get_named_gpiod_flags: can't parse 'tx-fault-gpio' property of node '/sfp-50[0]' [ 28.962194] sfp sfp-50: using lookup tables for GPIO lookup [ 28.962198] sfp sfp-50: No GPIO consumer tx-fault found [ 28.962201] sfp sfp-50: GPIO lookup for consumer tx-disable [ 28.962204] sfp sfp-50: using device tree for GPIO lookup [ 28.962212] of_get_named_gpiod_flags: can't parse 'tx-disable-gpios' property of node '/sfp-50[0]' [ 28.962222] of_get_named_gpiod_flags: parsed 'tx-disable-gpio' property of node '/sfp-50[0]' - status (0) [ 28.962227] gpio-505 (tx-disable): no flags found for tx-disable [ 28.962231] sfp sfp-50: GPIO lookup for consumer rate-select0 [ 28.962234] sfp sfp-50: using device tree for GPIO lookup [ 28.962242] of_get_named_gpiod_flags: can't parse 'rate-select0-gpios' property of node '/sfp-50[0]' [ 28.962249] of_get_named_gpiod_flags: can't parse 'rate-select0-gpio' property of node '/sfp-50[0]' [ 28.962254] sfp sfp-50: using lookup tables for GPIO lookup [ 28.962258] sfp sfp-50: No GPIO consumer rate-select0 found [ 28.962264] sfp sfp-50: Host maximum power 1.0W [ 28.964425] dps_920ab 0-0058: new chip found [ 28.971228] i2c i2c-0: new_device: Instantiated device tn48m_poe_psu at 0x58 [ 28.978591] dps_920ab 0-0059: new chip found [ 28.979213] mdio_bus i2c:sfp-51: GPIO lookup for consumer reset [ 28.982911] mdio_bus i2c:sfp-51: using lookup tables for GPIO lookup [ 28.982916] mdio_bus i2c:sfp-51: No GPIO consumer reset found [ 28.982920] libphy: SFP I2C Bus: probed [ 28.982969] i2c i2c-0: new_device: Instantiated device tn48m_poe_psu at 0x59 [ 28.986779] sfp sfp-51: GPIO lookup for consumer mod-def0 [ 28.986782] sfp sfp-51: using device tree for GPIO lookup [ 28.993878] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-51[0]' [ 28.993896] of_get_named_gpiod_flags: parsed 'mod-def0-gpio' property of node '/sfp-51[0]' - status (0) [ 28.993906] sfp sfp-51: GPIO lookup for consumer los [ 28.993909] sfp sfp-51: using device tree for GPIO lookup [ 28.993917] of_get_named_gpiod_flags: can't parse 'los-gpios' property of node '/sfp-51[0]' [ 28.993928] of_get_named_gpiod_flags: parsed 'los-gpio' property of node '/sfp-51[0]' - status (0) [ 28.993933] sfp sfp-51: GPIO lookup for consumer tx-fault [ 28.993936] sfp sfp-51: using device tree for GPIO lookup [ 28.993944] of_get_named_gpiod_flags: can't parse 'tx-fault-gpios' property of node '/sfp-51[0]' [ 28.993951] of_get_named_gpiod_flags: can't parse 'tx-fault-gpio' property of node '/sfp-51[0]' [ 28.993956] sfp sfp-51: using lookup tables for GPIO lookup [ 28.993960] sfp sfp-51: No GPIO consumer tx-fault found [ 28.993964] sfp sfp-51: GPIO lookup for consumer tx-disable [ 28.993967] sfp sfp-51: using device tree for GPIO lookup [ 28.993975] of_get_named_gpiod_flags: can't parse 'tx-disable-gpios' property of node '/sfp-51[0]' [ 28.993985] of_get_named_gpiod_flags: parsed 'tx-disable-gpio' property of node '/sfp-51[0]' - status (0) [ 28.993989] gpio-508 (tx-disable): no flags found for tx-disable [ 28.993993] sfp sfp-51: GPIO lookup for consumer rate-select0 [ 28.993996] sfp sfp-51: using device tree for GPIO lookup [ 28.994004] of_get_named_gpiod_flags: can't parse 'rate-select0-gpios' property of node '/sfp-51[0]' [ 28.994012] of_get_named_gpiod_flags: can't parse 'rate-select0-gpio' property of node '/sfp-51[0]' [ 28.994016] sfp sfp-51: using lookup tables for GPIO lookup [ 28.994020] sfp sfp-51: No GPIO consumer rate-select0 found [ 28.994026] sfp sfp-51: Host maximum power 1.0W [ 28.997562] adt7475 1-002e: ADT7473 device, revision 0 [ 29.003758] adt7475 1-002e: Optional features: fan4 pwm2 [ 29.009894] mdio_bus i2c:sfp-52: GPIO lookup for consumer reset [ 29.009900] mdio_bus i2c:sfp-52: using lookup tables for GPIO lookup [ 29.009904] mdio_bus i2c:sfp-52: No GPIO consumer reset found [ 29.009907] libphy: SFP I2C Bus: probed [ 29.013774] sfp sfp-52: GPIO lookup for consumer mod-def0 [ 29.013777] sfp sfp-52: using device tree for GPIO lookup [ 29.013791] of_get_named_gpiod_flags: can't parse 'mod-def0-gpios' property of node '/sfp-52[0]' [ 29.013806] of_get_named_gpiod_flags: parsed 'mod-def0-gpio' property of node '/sfp-52[0]' - status (0) [ 29.013813] sfp sfp-52: GPIO lookup for consumer los [ 29.013817] sfp sfp-52: using device tree for GPIO lookup [ 29.013825] of_get_named_gpiod_flags: can't parse 'los-gpios' property of node '/sfp-52[0]' [ 29.013835] of_get_named_gpiod_flags: parsed 'los-gpio' property of node '/sfp-52[0]' - status (0) [ 29.013840] sfp sfp-52: GPIO lookup for consumer tx-fault [ 29.013843] sfp sfp-52: using device tree for GPIO lookup [ 29.013851] of_get_named_gpiod_flags: can't parse 'tx-fault-gpios' property of node '/sfp-52[0]' [ 29.013858] of_get_named_gpiod_flags: can't parse 'tx-fault-gpio' property of node '/sfp-52[0]' [ 29.013863] sfp sfp-52: using lookup tables for GPIO lookup [ 29.013867] sfp sfp-52: No GPIO consumer tx-fault found [ 29.013871] sfp sfp-52: GPIO lookup for consumer tx-disable [ 29.013874] sfp sfp-52: using device tree for GPIO lookup [ 29.013882] of_get_named_gpiod_flags: can't parse 'tx-disable-gpios' property of node '/sfp-52[0]' [ 29.013892] of_get_named_gpiod_flags: parsed 'tx-disable-gpio' property of node '/sfp-52[0]' - status (0) [ 29.013896] gpio-511 (tx-disable): no flags found for tx-disable [ 29.013900] sfp sfp-52: GPIO lookup for consumer rate-select0 [ 29.013903] sfp sfp-52: using device tree for GPIO lookup [ 29.013911] of_get_named_gpiod_flags: can't parse 'rate-select0-gpios' property of node '/sfp-52[0]' [ 29.013918] of_get_named_gpiod_flags: can't parse 'rate-select0-gpio' property of node '/sfp-52[0]' [ 29.013923] sfp sfp-52: using lookup tables for GPIO lookup [ 29.013926] sfp sfp-52: No GPIO consumer rate-select0 found [ 29.013932] sfp sfp-52: Host maximum power 1.0W [ 29.027159] i2c i2c-1: new_device: Instantiated device adt7473 at 0x2e [ 29.034114] lm75 1-004a: supply vs not found, using dummy regulator [ 29.041026] lm75 1-004a: hwmon4: sensor 'tmp1075' [ 29.045796] i2c i2c-1: new_device: Instantiated device tmp1075 at 0x4a [ 29.052579] lm75 1-004b: supply vs not found, using dummy regulator [ 29.059448] lm75 1-004b: hwmon5: sensor 'tmp1075' [ 29.064215] i2c i2c-1: new_device: Instantiated device tmp1075 at 0x4b [ 29.121398] Loading Marvell Prestera Switch Driver [ 29.217486] AC3x B2B 98DX3265 0000:01:00.0: FW version '2.8.0' [ 29.223367] AC3x B2B 98DX3265 0000:01:00.0: Driver version '2.8.0' [ 29.229581] AC3x B2B 98DX3265 0000:01:00.0: Loading prestera FW image ... [ 29.348731] sfp sfp-52: module OEM SF-SFP+SR-DE rev B4 sn M4778209 dc 191227 [ 32.181682] AC3x B2B 98DX3265 0000:01:00.0: Prestera Switch FW is ready [ 42.557128] AC3x B2B 98DX3265 0000:01:00.0: Initialized Switch device [ 44.395916] AC3x B2B 98DX3265 0000:01:00.0 eth51: switched to inband/10gbase-r link mode [ 44.456546] prestera_pci: Registered Marvell Prestera PCI driver [ 44.652273] dps_920ab 0-005b: new chip found [ 44.656689] i2c i2c-0: new_device: Instantiated device tn48m_poe_psu at 0x5b [ 44.851618] dps_920ab 0-005a: new chip found [ 44.856030] i2c i2c-0: new_device: Instantiated device tn48m_poe_psu at 0x5a [ 58.182510] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 58.200836] systemd[1]: Detected architecture arm64. [ 58.221528] systemd[1]: Set hostname to . [ 58.341911] systemd[1]: Listening on Journal Socket. [ 58.361372] systemd[1]: Listening on Syslog Socket. [ 58.377345] systemd[1]: Listening on RPCbind Server Activation Socket. [ 58.401525] systemd[1]: Listening on Journal Audit Socket. [ 58.421362] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 58.445289] systemd[1]: Reached target Swap. [ 58.461431] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 58.729111] u32 classifier [ 58.731906] Performance counters on [ 58.735817] input device check on [ 58.739499] Actions configured [ 58.752614] GACT probability on [ 59.216067] systemd-journald[477]: Received request to flush runtime journal from PID 1 [ 59.508207] AC3x B2B 98DX3265 0000:01:00.0 swp1: renamed from eth0 [ 59.538693] AC3x B2B 98DX3265 0000:01:00.0 swp21: renamed from eth20 [ 59.574870] AC3x B2B 98DX3265 0000:01:00.0 swp16: renamed from eth15 [ 59.607774] AC3x B2B 98DX3265 0000:01:00.0 swp11: renamed from eth10 [ 59.635500] AC3x B2B 98DX3265 0000:01:00.0 swp19: renamed from eth18 [ 59.667062] AC3x B2B 98DX3265 0000:01:00.0 swp3: renamed from eth2 [ 59.707447] AC3x B2B 98DX3265 0000:01:00.0 swp22: renamed from eth21 [ 59.747178] AC3x B2B 98DX3265 0000:01:00.0 swp12: renamed from eth11 [ 59.778345] AC3x B2B 98DX3265 0000:01:00.0 swp13: renamed from eth12 [ 59.815186] AC3x B2B 98DX3265 0000:01:00.0 swp15: renamed from eth14 [ 59.862786] AC3x B2B 98DX3265 0000:01:00.0 swp17: renamed from eth16 [ 59.901649] AC3x B2B 98DX3265 0000:01:00.0 swp2: renamed from eth1 [ 59.946220] AC3x B2B 98DX3265 0000:01:00.0 swp24: renamed from eth23 [ 59.970520] AC3x B2B 98DX3265 0000:01:00.0 swp20: renamed from eth19 [ 60.006777] AC3x B2B 98DX3265 0000:01:00.0 swp14: renamed from eth13 [ 60.045995] AC3x B2B 98DX3265 0000:01:00.0 swp26: renamed from eth25 [ 60.074413] AC3x B2B 98DX3265 0000:01:00.0 swp18: renamed from eth17 [ 60.102188] AC3x B2B 98DX3265 0000:01:00.0 swp28: renamed from eth27 [ 60.125994] AC3x B2B 98DX3265 0000:01:00.0 swp23: renamed from eth22 [ 60.150833] AC3x B2B 98DX3265 0000:01:00.0 swp31: renamed from eth30 [ 60.185603] AC3x B2B 98DX3265 0000:01:00.0 swp25: renamed from eth24 [ 60.210065] AC3x B2B 98DX3265 0000:01:00.0 swp27: renamed from eth26 [ 60.242679] AC3x B2B 98DX3265 0000:01:00.0 swp36: renamed from eth35 [ 60.281734] AC3x B2B 98DX3265 0000:01:00.0 swp4: renamed from eth3 [ 60.321750] AC3x B2B 98DX3265 0000:01:00.0 swp34: renamed from eth33 [ 60.349582] AC3x B2B 98DX3265 0000:01:00.0 swp33: renamed from eth32 [ 60.385965] AC3x B2B 98DX3265 0000:01:00.0 swp39: renamed from eth38 [ 60.422004] AC3x B2B 98DX3265 0000:01:00.0 swp35: renamed from eth34 [ 60.457905] AC3x B2B 98DX3265 0000:01:00.0 swp32: renamed from eth31 [ 60.498445] AC3x B2B 98DX3265 0000:01:00.0 swp30: renamed from eth29 [ 60.529584] AC3x B2B 98DX3265 0000:01:00.0 swp29: renamed from eth28 [ 60.569976] AC3x B2B 98DX3265 0000:01:00.0 swp45: renamed from eth44 [ 60.601562] AC3x B2B 98DX3265 0000:01:00.0 swp37: renamed from eth36 [ 60.642036] AC3x B2B 98DX3265 0000:01:00.0 swp48: renamed from eth47 [ 60.682334] AC3x B2B 98DX3265 0000:01:00.0 swp42: renamed from eth41 [ 60.713595] AC3x B2B 98DX3265 0000:01:00.0 swp5: renamed from eth4 [ 60.742088] AC3x B2B 98DX3265 0000:01:00.0 swp38: renamed from eth37 [ 60.785600] AC3x B2B 98DX3265 0000:01:00.0 swp44: renamed from eth43 [ 60.817541] AC3x B2B 98DX3265 0000:01:00.0 swp40: renamed from eth39 [ 60.849613] AC3x B2B 98DX3265 0000:01:00.0 swp46: renamed from eth45 [ 60.878050] AC3x B2B 98DX3265 0000:01:00.0 swp52: renamed from eth51 [ 60.907382] AC3x B2B 98DX3265 0000:01:00.0 swp41: renamed from eth40 [ 60.943645] AC3x B2B 98DX3265 0000:01:00.0 swp43: renamed from eth42 [ 60.973972] AC3x B2B 98DX3265 0000:01:00.0 swp47: renamed from eth46 [ 61.018810] AC3x B2B 98DX3265 0000:01:00.0 swp7: renamed from eth6 [ 61.061889] AC3x B2B 98DX3265 0000:01:00.0 swp9: renamed from eth8 [ 61.102357] AC3x B2B 98DX3265 0000:01:00.0 swp8: renamed from eth7 [ 61.119937] AC3x B2B 98DX3265 0000:01:00.0 swp51: renamed from eth50 [ 61.160493] AC3x B2B 98DX3265 0000:01:00.0 swp50: renamed from eth49 [ 61.198803] AC3x B2B 98DX3265 0000:01:00.0 swp49: renamed from eth48 [ 61.235403] AC3x B2B 98DX3265 0000:01:00.0 swp6: renamed from eth5 [ 61.279053] AC3x B2B 98DX3265 0000:01:00.0 swp10: renamed from eth9 [ 62.653140] process '/sbin/netplugd' started with executable stack [ 492.153666] mvpp2 f2000000.ethernet ma1: Link is Up - 1Gbps/Full - flow control off [ 492.161409] IPv6: ADDRCONF(NETDEV_CHANGE): ma1: link becomes ready